FeOx@GAC catalyzed microbubble ozonation coupled with biological process for industrial phenolic wastewater treatment: Catalytic performance, biological process screening and microbial characteristics

Shihai Deng,Lakshmi Jothinathan,Qinqing Cai,Rui Li,Mengyuan Wu,Say Leong Ong,Jiangyong Hu
DOI: https://doi.org/10.1016/j.watres.2020.116687
IF: 12.8
2021-02-01
Water Research
Abstract:<p>Phenolic compounds are common ccontaminants in industrial effluents. In this study, a combined catalytic microbubble ozonation and biological process was developed and applied for efficient industrial phenolic wastewater (PWW) treatment. Catalytic activity of an iron-oxides (FeO<sub>x</sub>) doped granular activated carbon (GAC) catalyst (FeO<sub>x</sub>@GAC) in microbubble ozonation for PWW treatment was investigated. The results demonstrated that the FeO<sub>x</sub>@GAC catalyzed microbubble ozonation (O<sub>3</sub>/FeO<sub>x</sub>@GAC) obtained significantly higher reaction rate constant (k<sub>1</sub> = 0.023 min<sup>−1</sup>) in TOC removal compared to the bare GAC catalyzed microbubble ozonation (O<sub>3</sub>/GAC, k<sub>1</sub> = 0.013 min<sup>−1</sup>) and ordinary microbubble ozonation (k<sub>1</sub> = 0.008 min<sup>−1</sup>). Destruction rate constant of phenolic compounds (k<sub>2</sub>) was improved from 0.014 min<sup>−1</sup> (ordinary microbubble ozonation) to 0.025 min<sup>−1</sup> (O<sub>3</sub>/FeO<sub>x</sub>@GAC). The 60-min pretreatment of PWW by O<sub>3</sub>/FeO<sub>x</sub>@GAC process enhanced BOD<sub>5</sub>/COD ratio from 0.31 to 0.76 and reduced the acute bio-toxicity by 79.2%. Screening and characterization of biological post-treatment processes were conducted among activated sludge process (ASP), up-flow anaerobic sludge blanket (UASB) and membrane bioreactor (MBR). UASB and ASP showed limited phenolic compounds removal of 35.4% and 57.0% with lower bio-toxicity resistance than MBR (94.9% phenolic compounds removal). The combined process O<sub>3</sub>/FeO<sub>x</sub>@GAC-MBR was thus developed and achieved high COD removal (98.0%) and phenolic compounds degradation (99.4%). PWW pretreatment by O<sub>3</sub>/FeO<sub>x</sub>@GAC process decreased membrane fouling rate of MBR by 88.2% by reducing proteins/polysaccharides accumulation in both extracellular polymeric substances and soluble microbial products. 16S rRNA high-throughput sequencing revealed the predominance of phylum Proteobacteria, class Alphaproteobacteria and genera <em>Mycobacterium, Gordonia, Pedomicrobium</em> &amp; <em>Defluviimonas</em> in biological PWW treatment bio-systems. Pearson correlation coefficient and ANOVA analysis verified that <em>Mycobacterium</em> possessed high bio-toxicity resistance and was the main contributor to the biodegradation of phenolic compounds.</p>
environmental sciences,engineering, environmental,water resources
What problem does this paper attempt to address?
This paper attempts to solve several key problems in the treatment of industrial phenolic wastewater: 1. **Improve the efficiency of organic matter removal**: By developing a method that combines catalytic micro - bubble ozonation and biological treatment, it aims to improve the efficiency of organic matter removal in industrial phenolic wastewater. Specifically, the removal effects of iron oxide - doped granular activated carbon (FeO_x@GAC) on total organic carbon (TOC) and phenolic compounds during the micro - bubble ozonation process were studied. 2. **Improve the biodegradability of wastewater**: The influence of the pretreatment process on the biodegradability of wastewater was studied. In particular, after O_3/FeO_x@GAC pretreatment, the BOD_5/COD ratio of the wastewater was significantly increased, thus enhancing the effect of subsequent biological treatment. 3. **Screen suitable biological treatment processes**: By comparing three biological treatment processes, namely the activated sludge process (ASP), the up - flow anaerobic sludge blanket (UASB), and the membrane bioreactor (MBR), the process most suitable for treating pretreated industrial phenolic wastewater was screened. The results showed that MBR performed best in terms of phenolic compound removal rate and toxicity resistance. 4. **Reduce membrane fouling**: The influence of O_3/FeO_x@GAC pretreatment on membrane fouling in the MBR system was studied. It was found that the pretreatment could significantly reduce the membrane fouling rate, thereby prolonging the service life of the membrane and reducing the operating cost. 5. **Analysis of microbial characteristics**: The structure and function of microbial communities in different treatment processes were analyzed by high - throughput sequencing technology. In particular, microbial species that play a key role in the biological treatment process, such as Mycobacterium, which has high biotoxicity resistance and phenolic compound degradation ability, were identified. In summary, the main objective of this paper is to improve the treatment efficiency of industrial phenolic wastewater by combining catalytic micro - bubble ozonation and biological treatment processes, while reducing membrane fouling and optimizing the overall treatment process.