Abstract:Demand over fossil fuel are kept raising in recent decades due to the utilization of heavy material on various industrial, transportation application. To reduce such over-dependence and produce less pollution creating substance, the light weight composite material is utilized in recent decades. The present study also investigates the mechanical, fatigue, drop load impact, and dynamic mechanical properties (DMA) of a polyester composite reinforced with silane-modified Sunn hemp fiber and nanocellulose extracted from Pisum sativum sheath biomass. The composite was fabricated using a hand layup method, with polyester resin serving as the matrix and Methyl ethyl ketone peroxide (MEKP) as the catalyst. The nanocellulose was prepared through a process of delignification and bleaching, while both the fiber and nanocellulose underwent silane treatment to enhance their compatibility with the resin. Among the specimens tested, PSC3 (2 vol% silane-treated nanocellulose) demonstrated superior mechanical properties, with a tensile strength of 141 MPa, flexural strength of 163 MPa, hardness of 84 Shore-D, and Izod impact strength of 6.6 J. In fatigue testing, PSC3 showed excellent performance, maintaining a maximum stress of 50 MPa at 10 3 cycles and 24 MPa at 10 5 cycles. The drop load impact test further confirmed PSC3's high impact resistance, with energy absorption peaking at 18 J and dissipating over 22 ms. Dynamic Mechanical Analysis (DMA) revealed that PSC3 had the highest storage modulus of 6.4 GPa at 91 °C and the lowest loss factor of 0.61 at 110 °C, indicating optimal stiffness, thermal stability, and damping behavior. The silane treatment significantly improved the fiber-matrix and filler-matrix bonding, resulting in enhanced load transfer, increased stiffness, and better overall mechanical performance. SEM analysis corroborated these findings, showing uniform dispersion of filler particles in PSC3, which contributed to its superior properties by preventing stress concentration and ensuring effective reinforcement. This study highlights the potential of silane-treated bio-based composites for applications requiring high mechanical and thermal performance such as interior body cover parts in automobile engineering, outer cover parts in power sector such turbine blade, windmill industry, and defence armour applications, sports equipment, etc.

Investigation of physico-mechanical properties of Mimosa pudica micro-fibrils as an effective reinforcement in polymer composite

Study on the mechanical properties of alkali treated screw pine root fiber reinforced in epoxy matrix composite material

Novel Cellulosic Natural Fibers from Abelmoschus Ficulneus Weed: Extraction and Characterization for Potential Application in Polymer Composites

Synthesis and characterization of pectin biopolymer from orange peel wastes and its effect on pineapple fiber-reinforced vinyl ester composite

Investigation of Mechanical and Thermal Stabilities of Tamarind Seed- and Peanut Shell Powder-Reinforced Vinyl Ester Composite

Experimental investigation on strengthening of Zea mays root fibres for biodegradable composite materials using potassium permanganate treatment

Static and dynamic mechanical characterization and thermal analysis for multi‐ply structure of woven nettle (Girardinia diversifolia) reinforced poly(lactic acid) biocomposites

Characterisation of Nanocellulose from Waste Pisum Sativum Sheath and its Sunn Hemp Fibre-Polyester Composite: A Step Towards Valorisation of Biomass

Mechanical characterization of novel Parthenium hysterophorus and Jute reinforced polymer matrix composites for light weight medium load applications and application of MADM-VIKOR approach

Biofiber from Musa paradisiaca L., Peduncle Biomass Waste: Extraction and Characterization for Polymer Composites Suitability Study

Fabrication and characterization of natural fiber reinforced cowpea resin-based green composites: an approach towards agro-waste valorization

Exploring the potential of Tamarindus indica stem short macro fibers reinforced guar gum resin green composites

Studies on Mechanical Properties and Morphology of Sisal Pulp Reinforced Phenolic Composites

Thermo-mechanical and viscoelastic behavior of microwave-processed sisal and banana hybrid composite laminates

Preparation and Characterization of Lemongrass Fiber (Cymbopogon species) for Reinforcing Application in Thermoplastic Composites

Studies on water uptake behavior and mechanical performance of bio-wastage-reinforced bio composites for improved sustainability

Investigation on the tensile and flexural behavior of coconut inflorescence fiber reinforced unsaturated polyester resin composites

Reinforcing and Toughening Effects of Bamboo Pulp Fiber on Poly(3-hydroxybutyrate-<i>co</i>-3-hydroxyvalerate) Fiber Composites

Nano-clay treatment of jute fiber for reinforcement in polymer composites: Mechanical, morphological, and thermo-kinetic analysis

Investigation of thermo‐mechanical and viscoelastic properties of 3D‐printed Morinda citrifolia particle reinforced poly(lactic acid) composites

Mechanical, viscoelastic, and flammability properties of polymer composites reinforced with novel Sirisha bark filler