Numerical simulation of wave overtopping above perforated caisson breakwaters

Xiao Liu,Yong Liu,Pengzhi Lin,Ai-jun Li
DOI: https://doi.org/10.1016/j.coastaleng.2020.103795
IF: 5.427
2021-01-01
Coastal Engineering
Abstract:<p>A two-dimensional numerical model was used to study the wave overtopping performance above perforated caisson breakwaters under regular waves. The turbulent flow was simulated by solving the Reynolds Averaged Navier–Stokes (RANS) equations and the <em>k</em>–<em>ε</em> turbulence model equations. In the numerical wave flume, the free surface was tracked by the Volume of Fluid (VOF) method, and a relaxation zone was added to avoid the unwanted re-reflection from the inflow boundary. Based on the ideal gas equation at a constant temperature, the pressure change caused by the compressed air inside the wave chamber was incorporated into the numerical model for accurately simulating the wave motion inside the wave chamber. The numerical results of the free surface elevations inside and outside the wave chamber, the wave overtopping discharges and the reflection coefficients of perforated caisson breakwaters were in good agreement with the experimental data. This means that the numerical model is valid in estimating wave action and overtopping on complicated coastal structures with perforated thin walls. The distributions of flow velocity and turbulence kinetic energy (TKE) around the perforated caissons were clarified, which gave a better understanding of the wave overtopping mechanism above the perforated caisson breakwaters. Numerical results showed that the wave energy transferred by the overtopping flows is much smaller than that dissipated by the perforated caisson breakwater. When the relative freeboard (the ratio of the crest freeboard to the incident wave height) of the perforated caisson breakwater was larger than 0.58, the existence of the overtopping flow has no significant influence on the reflection coefficient. Besides, avoiding the air compression inside the wave chamber can effectively reduce the overtopping discharge. Increasing the caisson porosity or the wave chamber width can also reduce the overtopping discharge above the perforated caisson breakwaters.</p>
engineering, civil, ocean
What problem does this paper attempt to address?
The problem that this paper attempts to solve is the wave overtopping performance on perforated - caisson breakwaters. Specifically, the research aims to explore, through numerical simulation methods, the wave overtopping phenomenon on perforated - caisson breakwaters under the action of regular waves, as well as the influence of this phenomenon on the wave reflection coefficient. In addition, the research also discusses how to reduce the wave overtopping flow on perforated - caisson breakwaters, including measures such as increasing the porosity of the caisson or the width of the wave chamber. ### Research Background The perforated - caisson breakwater is a structure with a perforated front wall, a solid rear wall and a wave - absorbing chamber, which was first proposed by Jarlan (1961). This structure has advantages in reducing wave reflection, wave overtopping and wave forces. However, there are relatively few studies on the wave overtopping phenomenon of perforated - caisson breakwaters, especially in terms of numerical simulation. ### Research Methods The researchers used a two - dimensional numerical model, based on the Reynolds - averaged Navier - Stokes equations (RANS) and the k - ε turbulence model equations, to simulate the wave overtopping flow on perforated - caisson breakwaters. The volume - of - fraction method (VOF) was used in the model to track the free surface, and a relaxation zone was introduced to avoid unnecessary reflection at the inflow boundary. In addition, the influence of the compressed air in the wave chamber on the wave motion was considered through the ideal gas equation. ### Main Findings 1. **Validity of the Numerical Model**: The numerical simulation results are in good agreement with the experimental data in terms of free - surface elevation, wave overtopping flow and reflection coefficient, which verifies the validity of the numerical model. 2. **Wave Overtopping Mechanism**: By analyzing the flow velocity and turbulent kinetic energy distribution, the wave overtopping mechanism is better understood. 3. **Methods to Reduce Wave Overtopping Flow**: - When the relative free - board height (the ratio of the free - board height to the incident wave height) of the perforated - caisson breakwater is greater than 0.58, the wave overtopping has little influence on the reflection coefficient. - Avoiding air compression in the wave chamber can effectively reduce the wave overtopping flow. - Increasing the porosity of the caisson or the width of the wave chamber can also reduce the wave overtopping flow. ### Conclusion This research successfully simulated the wave overtopping phenomenon on perforated - caisson breakwaters through numerical simulation methods and proposed effective measures to reduce the wave overtopping flow. These findings are of great significance for the design and optimization of perforated - caisson breakwaters.