Abstract:The effect of loading force, loading rate and unloading rate on the viscoelastic behavior of three representative polymers: poly(methyl methacrylate) (PMMA, amorphous polymer), polyvinylidene fluoride (PVDF, semicrystalline polymer), and epoxy (crosslinked polymer) have been investigated using nanoindentation. The results showed that the maximum indentation depth increased with the increase of loading force, and the relationship between loading force and depth became linear when the loading force is beyond 3000 mu N. At the beginning, the plasticity index changed substantially with the increase of loading force, and after reaching a critical loading force, the plasticity index almost remained constant. The maximum indentation depth decreased with the increase of loading rate, which followed a power law curve. With the increase of loading rate, a plasticization phenomenon happened, and a possible reason is that the heat may accumulate and raise the local temperature. The plasticity index initially followed the power law with the increase of unloading rate and then almost remained constant. A constant, the change rate of viscoelastic properties with the unloading rate, for the three representative polymers studied in this research, around -0.033, has been obtained, which may be another manifestation of the phenomenon that many polymers have similar time/temperature shifts and that their WLF equation constants are approximately the same. (C) 2011 Wiley Periodicals, Inc. J Appl Polym Sci 122: 885-890, 2011

Investigation of in-plane visco-deformation in PMMA indentation via TLV model calibrated with tensile specimens

Viscoelastic Property Evolution of Thermoplastic Polyurethane During Annealing Treatment and Its Correlation with Segmental Crystallization

Influence of Thermoviscoelastic Properties and Loading Conditions on the Recovery Performance of Shape Memory Polymers

Numerical Implementation of Strain Rate Dependent Thermo Viscoelastic Constitutive Relation to Simulate the Mechanical Behavior of PMMA

Determining the constitutive behavior of nonlinear visco-elastic-plastic PMMA thin films using nanoindentation and finite element simulation

Viscoelastic Behavior of Poly(Methyl Methacrylate-Co-Methyl Acrylate) Random Copolymer Studied by Dynamic Mechanical Analysis and Nanoindentation

Measurement of Viscoelastic Properties for Polymers by Nanoindentation

An Unexpected Plasticization Phenomenon and a Constant of the Change Rate of Viscoelastic Properties for Polymers During Nanoindentation Test

Deformation Mechanisms of Polymer Thin Films by Simultaneous Kinetic Measurement of Microscopic Infrared Dichroism and Macroscopic Stress. Part Iii: Influence of Morphology on Molecular Orientation of Isotactic Polypropylene Films Subjected to Uniaxial Stretching

Research on Viscoelastic Behavior of Semi‐crystalline Polymers Using Instrumented Indentation

Experimental Study On The Effects Of Hygrothermal Aging On The Indentation Creep Behaviors Of Pmma

Measurements of Viscoelastic Functions of Polymers in the Frequency-Domain Using Nanoindentation

Experimental and numerical study on the viscoelastic property of polycarbonate near glass transition temperature for micro thermal imprint process

Mechanical characterization of soft viscoelastic gels via indentation and optimization-based inverse finite element analysis

Investigation on the Influences of Hygrothermal Aging on the Indentation Size Effects and Micro-Indentation Measurements of PMMA. Part I: Experimental Results

A Uniform Viscoelastic-Plastic Constitutive Model for MD-PMMA at a Wide Temperature Range

Modeling nano-indentation tests of glassy polymers using finite elements with strain gradient plasticity

Study on the optimal loading rates in the measurement of viscoelastic properties of hydrogels by conical indentation

Relationships Between Lateral Force and Viscoelastic Properties for Amorphous Polymer Films Based on Lateral Force Microscopy

Experimental Study on Mechanical Properties of PMMA under Unidirectional Tensile at Low and Intermediate Strain Rates

Rate Sensitivity and Deformation Mechanism of Semi‐crystalline Polymers During Instrumented Indentation