Targeted reclaiming cationic dyes from dyeing wastewater with a dithiocarbamate-functionalized material through selective adsorption and efficient desorption

Ya Liu,Yunfeng Zhao,Wei Cheng,Tao Zhang
DOI: https://doi.org/10.1016/j.jcis.2020.06.083
IF: 9.9
2020-11-01
Journal of Colloid and Interface Science
Abstract:<p>In this work, we applied a novel dithiocarbamate-grafted star-like polymer for efficient reclamation of cationic dyes. This material is highly selective towards cationic dyes and almost completely rejective to anionic dyes. The adsorption kinetics, isotherms, and thermodynamics were systematically investigated to analyze the adsorption behavior of cationic dyes onto the material. As compared with other reported adsorbents, this cheap and facilely-prepared material has exceptional adsorption capacities for industrial cationic dyes, e.g., methylene blue (MB, 2624 mg/g), crystal violet (CV, 2553 mg/g), basic fuchsin (BF, 1729 mg/g), and methylene violet 3RAX (MV, 1239 mg/g), being 5–11 times of that reported in literatures. Based on the effects of pH and ionic strength on adsorption, competitive adsorption of the cationic dyes, and FTIR characterization, mechanisms for the adsorption and desorption of cationic dyes were proposed. The adsorbed dyes can be recovered over 95% just by immersing into diluted HCl solution (0.01 M) for 10 min, thus avoiding organic solvent extraction. Over 98% of the adsorption capacity was maintained during consecutive reclamation operation. Due to the high selectivity, high adsorption capacity and the ease of efficient regeneration, this material is potentially applicable for targeted reclamation of cationic dyes from dyeing wastewater.</p>
chemistry, physical
What problem does this paper attempt to address?
The problem this paper attempts to address is the efficient and selective recovery of cationic dyes from dyeing wastewater. Specifically, the researchers developed a star-shaped polymer material functionalized with dithiocarbamate (SAPD) to achieve this goal through selective adsorption and efficient desorption processes. The paper discusses in detail the adsorption performance of this material for several common cationic dyes (such as methylene blue, crystal violet, basic fuchsin, and methylene violet 3RAX) and analyzes its adsorption kinetics, isotherms, and thermodynamic properties. Additionally, the study examines the effects of pH and ionic strength on adsorption, as well as the material's application performance in actual water bodies and its stability and regeneration capability in multiple adsorption-desorption cycles. ### Main Research Content: 1. **Material Synthesis and Characterization**: - Synthesized a star-shaped polymer material functionalized with dithiocarbamate (SAPD). - Characterized the morphology, structure, and chemical composition of the material using SEM, TEM, FTIR, and XPS. 2. **Adsorption Performance Study**: - Investigated the adsorption performance of SAPD for individual cationic dyes (methylene blue, crystal violet, basic fuchsin, methylene violet 3RAX) and an anionic dye (methyl orange). - Examined the effects of pH and ionic strength on adsorption. - Analyzed the selective adsorption mechanism of SAPD for cationic dyes. 3. **Adsorption Kinetics, Isotherms, and Thermodynamics**: - Fitted the adsorption kinetics data using pseudo-first-order and pseudo-second-order kinetic models. - Fitted the adsorption isotherm data using Langmuir and Sips models. - Calculated the changes in Gibbs free energy, enthalpy, and entropy during the adsorption process to explore the thermodynamic feasibility of adsorption. 4. **Practical Application and Regeneration Performance**: - Tested the adsorption performance of SAPD in actual water bodies. - Examined the stability and regeneration capability of SAPD in multiple adsorption-desorption cycles. ### Main Conclusions: - SAPD exhibits extremely high selectivity and adsorption capacity for cationic dyes, with saturation adsorption capacities for methylene blue, crystal violet, basic fuchsin, and methylene violet 3RAX of 2624 mg/g, 2553 mg/g, 1729 mg/g, and 1239 mg/g, respectively, far exceeding those of other reported adsorbents. - SAPD shows good adsorption performance for cationic dyes over a wide pH range (3-12) and is minimally affected by ionic strength. - SAPD can achieve efficient desorption and regeneration through simple dilute hydrochloric acid treatment, maintaining high adsorption performance after multiple cycles. - SAPD performs well in actual water bodies, with removal rates for cationic dyes exceeding 95%. In summary, this study provides a novel, economically feasible material and technical solution for the efficient and selective recovery of cationic dyes from dyeing wastewater.