Abstract:Designing scalable and continuous methods for fabricating thin and defect‐free membranes can leverage the full potential of two‐dimensional materials. A new method for fabricating high‐order MXene membranes in a continuous roll‐to‐roll way is reported, using rod‐coating MXene dispersions with proper rheological behavior. The membranes show outstanding dye molecule removal and ion separation performance owing to the narrow and uniform nanochannels. Application‐oriented assembly of two‐dimensional nanosheets with uniform nanochannels is critical for fabricating sophisticated, high‐performance membranes for water treatment. However, fabricating the desired membranes by a simple, fast, and effective method is a challenge as most of the previous methods are based on batch processes rather than a continuous roll‐to‐roll process. Here, a simple Meyer rod‐coating approach to continuously fabricate large‐size and flat MXene membranes at a scale up to 5 m is introduced. This study demonstrated that a high MXene concentration, above 10 mg mL−1, is critical in processability due to the desired viscosity, surface tension, and viscoelastic properties. The as‐made MXene membranes show that shearing and solutal‐Marangoni flow can considerably improve the ordering of the stacked MXene nanoflakes. Thus, the rod‐coated MXene membranes demonstrate a smaller surface roughness and interlayer distance compared to the MXene membranes fabricated by the most commonly vacuum‐assisted filtration. The rod‐costed MXene membranes show superior performance in dye and mono/divalent cation separation. The proposed roll‐to‐roll Meyer rod‐coating method can also be used to fabricate MXene‐based composites, such as MXene/carbon nanotubes and MXene/polymer, using the inks containing high concentration MXene and other desired compositions. This roll‐to‐roll method will promote an industry‐level fabrication and application of MXene‐based membranes.

Frontispiece: Shearing Liquid‐Crystalline MXene into Lamellar Membranes with Super‐Aligned Nanochannels for Ion Sieving

Frontispiz: Lamellare MXene‐Membranen Für Das Ionen‐Sieben Mit Superausgerichteten Nanokanälen Durch Das Scheren Flüssigkristalliner MXene‐Suspensionen

Cover Picture: A Regularly Channeled Lamellar Membrane for Unparalleled Water and Organics Permeation (Angew. Chem. Int. Ed. 23/2018)

MXene Molecular Sieving Membranes for Highly Efficient Gas Separation

A Two-Dimensional Lamellar Membrane: MXene Nanosheet Stacks.

MXeneNanosheets and Membranes

Charge and Size Selective Ion Sieving Through Ti3c2tx Mxene Membranes

Crumpled Two-Dimensional Ti3C2Tx MXene Lamellar Membranes for Solvent Permeation and Separation

Self-assembly enabled nano-intercalation for stable high-performance MXene membranes

A Lamellar MXene (ti3c2tx)/pss Composite Membrane for Fast and Selective Lithium‐Ion Separation

2D MXene Nanofilms with Tunable Gas Transport Channels

MXene‐Based Membranes for Separation Applications

Recent Progress in the Design and Fabrication of MXene-based Membranes

Aqueous Stable Ti 3 C 2 MXene Membrane with Fast and Photoswitchable Nanofluidic Transport.

MXene Materials for Designing Advanced Separation Membranes

High performance mixed-dimensional assembled MXene composite membranes for molecular sieving

Roll‐To‐Roll Fabricating MXene Membranes with Ordered Interlayer Distances For Molecule And Ion Separation

Advances in MXene Films: Synthesis, Assembly, and Applications

Recent advances in 2D MXenes: preparation, intercalation and applications in flexible devices

Roll‐To‐Roll Fabricating Mene Membranes with Ordered Interlayer Distances For Molecule And Ion Separation

Enhancing Interfacial Adhesion of MXene Nanofiltration Membranes Via Pillaring Carbon Nanotubes for Pressure and Solvent Stable Molecular Sieving