Abstract:As a key component of the rolling mill, the four-row cylindrical roller bearing (FCRB) operates under complex working conditions of high speed, high temperature, and heavy load. Due to the lack of an effective temperature test scheme for rolling mill bearings, a too high temperature can easily lead to bearing failure or damage under unsteady conditions. To reveal the internal temperature distribution law of four-row roller bearings of rolling mills and solve the common problem of difficult temperature monitoring of rolling mill bearings, in this paper, a four-row cylindrical roller bearing of 1140 mm cold rolling six-high mill is taken as the research object, and the temperature field calculation model for four-row cylindrical roller bearings is established. Firstly, the mechanical analysis model of FCRB is established on the basis of single row bearing by slice method. Secondly, the mechanical calculation model of FCRB is established by the Newton–Raphson method (NRM) and the finite element method (FEM). Thirdly, based on the mechanical calculation model, the finite element method is used to establish the temperature field model of FCRB under uniform load distribution and non-uniform load distribution. Finally, the temperature test experiment is carried out with the FCRB in the rolling mill fault diagnosis test bench. The results show that the error between the FCRB temperature calculation model and the experimental results is less than 10%. It can be seen that the uneven temperature distribution of FCRB is mainly caused by the uneven load distribution. The temperature distribution along the axial direction of the bearing is related to the load distribution of each column, while the circumferential temperature distribution is related to the azimuth angle.

Research on transient temperature rise characteristics of composite cylindrical roller bearings

Analysis and experimental research of transient temperature rise characteristics of high-speed cylindrical roller bearing

Research and Experiment on the Thermal Characteristics of Hybrid Ceramic Bearings

Thermo-mechanical Coupling Analysis of a High-Speed Actuating Mechanism Based on a New Thermal Contact Resistance Model

The Simulation Analysis and Experimental Study on the Temperature Field of Four Row Rolling Bearings of Rolling Mill under Non-Uniform Load Conditions

Analysis of Temperature Field Distribution of Magnetic-Fluid Bearing for High-Speed Trains

Thermo-mechanical analysis of angular contact ball bearing

Structures Dynamic Property Analysis of Elastic Composite Cylindrical Rolling Element

Study on the Thermal Performance and Temperature Distribution of Ball Bearings in the Traction Motor of a High-Speed EMU

Thermal-mechanical Fully Coupled Analysis of High-Speed Angular Contact Ball Bearings

Analysis of Circulation Characteristics and Heat Balance of High-Speed Rolling Bearing under Oil-Air Lubrication

Effect of structure and assembly constraints on temperature of high-speed angular contact ball bearings with thermal network method

Simulation Analysis and Experimental Study on the Fluid–Solid–Thermal Coupling of Traction Motor Bearings

Composite thermal oil film lubrication model for hybrid journal bearings

Analysis of the Temperature Characteristics of High-speed Train Bearings Based on a Dynamics Model and Thermal Network Method

Research on the influencing factors of thermal characteristics of high-speed grease lubricated angular contact ball bearing

A Predictive Model for Temperature Rise of Spindle–Bearing Integrated System

Coupling effect of partial composite texture and thermal effect on the performance of hydrostatic bearing

Transient characteristics of misaligned roller bearing considering thermal-fluid-solid coupled

Transient mixed thermal elastohydrodynamic lubrication analysis of aero ball bearing under non-steady state conditions

Modal and harmonic response analysis of a rolling bearing coupled by rigid and flexible materials