Abstract:To study the influences of the cross-sectional shapes on the final depths of penetration, a series of experiments were carried out on the penetration of long-rod projectiles with the same cross-sectional area different cross-sectional shapes into semi-infinite metal targets. The cross-sectional shapes were machined to be circular, square and cross, respectively. These experiments were divided into two groups. In one group of experiments, the long-rod projectiles with the aspect ratio of 8 and 93W alloy cores penetrated into armor-steel target plates. In another group of experiments, the long-rod projectiles with the aspect ratio of 15 and 45 steel cores penetrated into the 45 steel target plates. Depths of penetration under different impact velocities were experimentally obtained for different cross-sectional shapes, aspect ratios, and materials of projectiles and targets, respectively. Experimental results display that the penetration abilities of the three kinds of long-rod projectiles with non-circular cross-section are higher than that of the long-rod projectiles with circular cross-section under the same working conditions. And among the four kinds of long-rod projectiles, the penetration ability of the long-rod projectiles with cross section is the highest, followed by that of the long-rod projectiles with square section. With the increase of the impact velocity, the penetration gains of the cross and square cross-section long-rod projectiles to the circular cross-section ones increase. The cross-section shape of craters penetrated by the triangular cross-section long-rod projectiles takes on arc triangle, and the cross-section shape of craters penetrated by the long-rod projectiles with square and cross sections, respectively, takes on approximate circle. After penetration of the three kinds of non-circular cross-section long-rod projectiles, cracks at certain angles with the axial direction appear in the mushroomed heads of the projectile bodies, which leading to less resistance encountered by the projectiles in the process of penetration. The reason, why the penetration abilities of three kinds of non-circular cross-section long-rod projectiles are higher than that of the circular-section long-rod projectiles, is their structural self-sharpening in the process of penetration.

Penetration of a Jacketed Tungsten Fibre/Zr-based Bulk Metallic Glass Matrix Composite Rod into Semi-infinite Targets

Effect of L/D on Penetration Performance of Tungsten Fibre/zr-Based Bulk Metallic Glass Matrix Composite Rod

Penetration Performance and Fragmentation Mechanism Behind Target of Tungsten Fibre/zirconium-Based Bulk Metallic Glass Matrix Composite Rod

Penetration Gain Study of a Tungsten-Fiber/Zr-Based Metallic Glass Matrix Composite

Penetration Fracture Mechanism of Tungsten-Fiber-Reinforced Zr-Based Bulk Metallic Glasses Matrix Composite under High-Velocity Impact

Experimental and Numerical Investigation on Ballistic Penetration Performance of TC4-Al3Ti Layered Composites by Hot Rolling

Penetration Failure Mechanism of Multi-Diameter Tungsten Fiber Reinforced Zr-Based Bulk Metallic Glasses Matrix Composite Rod

Investigation on the influence of strength and density of jacket materials on the penetration performance of jacketed rods

Research on anti-penetration performance of composite armor of steel/composite materials

Investigation on the penetration of jacketed rods with striking velocities of 0.9–3.3 km/s into semi-infinite targets

Effect of Tungsten Fiber Diameter on the Dynamic Compression Properties of Tungsten Fiber/zr-Based Bulk Metallic Glasses Matrix Composite

Experimental Research on Tungsten Alloy Spherical Fragments Penetrating into Carbon Fiber Target Plate

Investigation on the influence of electrospark deposited 718 alloy coating on the penetration performance of 93 W rod

Oblique Penetration of Tungsten Alloy Rod to Finite-Thickness Metal Plate

Study of Residual Projectile of Two Kinds of Penetrators

Study on the Penetration Performance of a 5.8 mm Ceramic Composite Projectile

Study on the Penetration Power of ZrO2 Toughened Al2O3 Ceramic Composite Projectile into Ceramic Composite Armor

Study on the Penetration Power of ZrO<sub>2</sub> Toughened Al<sub>2</sub>O<sub>3</sub> Ceramic Composite Projectile into Ceramic Composite Armor

Experimental Study on Penetration of Non-Circular Cross-Section Long-Rod Projectiles into Semi-Infinite Metal Target

The Effects of Compressibility and Strength on Penetration of Long Rod and Jet

Experimental research on the mechanism of a high-velocity projectile penetrating into a reinforced concrete target