Abstract:The development of structural energy-storage materials is critical for the lightweighting and space utilization of electric vehicles and aircrafts. However, a structural electrolyte suitable for structural energy devices is rarely exploited. Here, a structural lithium battery composed of a fiber-reinforced structural electrolyte and a structural cathode is demonstrated. Benefitting from poly(ethylene oxide)–lithium bis(trifluoromethane)sulfonimide (PEO-LiTFSI) as the polymer electrolyte matrix and lithium aluminum titanium phosphate (LATP) and glass fiber (GF) as reinforcement fillers, the LATP-GF/PEO-LiTFSI composite electrolyte developed offers a high tensile strength of 33.1 MPa, large Li+ transfer number of 0.37, moderate ionic conductivity of 6.3 × 10–5 S cm–1 (at 25 °C), wide electrochemical window of 4.4 V, and high effectiveness in suppression of lithium dendrite growth. Finally, a structural lithium battery is demonstrated with acidified carbon fibers (ACFs) as the cathode, Li as the anode, and LATP-GF/PEO-LiTFSI as the electrolyte, which shows an ultrahigh tensile strength of 124.2 MPa and a moderate capacity of 1.45 mAh cm–2. Importantly, the ACF|LATP-GF/PEO-LiTFSI|Li cell can properly function under a high compressive stress of 11.26 MPa. It is believed that the design strategy with a fiber-reinforced polymer as the structural electrolyte and a carbon fiber woven fabric as the structural electrode is feasible to obtain high-performance structural energy-storage components.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c00402?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c00402</a>.XRD patterns of LATP powders and LATP-GF/PEO-LiTFSI composite, SEM image of the cross section of LATP-GF/PEO-LiTFSI, EDAX pattern of LATP particles embedded in LATP-GF/PEO-LiTFSI, S 2p and N 1s core level XPS spectra for desized CF and ACF, XPS spectra of CF and ACF, EIS of SS symmetric cells with electrolytes at different temperatures, ionic conductivities of electrolytes at various temperatures from 25 to 80 °C, LSV curves and current–time curves of GF/PEO-LiTFSI and LATP/PEO-LiTFSI, tLi+ and ionic conductivities of different electrolytes at 25 °C, compression test of the ACF|LATP-GF/PEO-LiTFSI|Li cell encapsulated with a glass fiber-reinforced epoxy, ID/IG values and average atomic percentages of C, N, O, and S on the surfaces of CF and ACF, relative surface concentrations (%) of C, N, O, and S species obtained by fitting the C 1s, N 1s, O 1s, and S 2p core levels, respectively, in XPS spectra, and comparison of ionic conductivity and tensile strength of solid electrolytes reported in the literature and this work (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00402/suppl_file/ae1c00402_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Structural supercapacitor electrolytes based on bicontinuous ionic liquid–epoxy resin systems

Epoxy-based multifunctional solid polymer electrolytes for structural batteries and supercapacitors. a short review

Energy storage in structural composites by introducing CNT fiber/polymer electrolyte interleaves

A Carbon Fiber Lamina Electrode Based on Macroporous Epoxy with Vertical Ion Channels for Structural Battery Composites

Structural energy storage composites based on modified carbon fiber electrode with metal-organic frame enhancing layered double hydroxide

Hybrid Solid Polymer Electrolytes Based on Epoxy Resins, Ionic Liquid, and Ceramic Nanoparticles for Structural Applications

Structural pseudocapacitors with reinforced interfaces to increase multifunctional efficiency

Ion transport, mechanical properties and relaxation dynamics in structural battery electrolytes consisting of an imidazolium protic ionic liquid confined into a methacrylate polymer

Sulfonated hypercrosslinked polymer enhanced structural composite supercapacitors

Energy storaging multifunctional carbon fiber composites based on Nano‐SiO2 reinforced epoxy matrix structural electrolytes

Composite solid polymer electrolyte with silica filler for structural supercapacitor applications

Architected Poly(ionic liquid) Composites with Spatially Programmable Mechanical Properties and Mixed Conductivity

High-Performance Structural Supercapacitors Based on Aligned Discontinuous Carbon Fiber Electrodes and Solid Polymer Electrolytes

Mechanically Robust and Highly Conductive Poly(ionic liquid)/Polyacrylamide Double-Network Hydrogel Electrolytes for Flexible Symmetric Supercapacitors with a Wide Operating Voltage Range

Liquid Crystal Electrolyte with Lamellar Ionic Channels for All‐In‐One Gel Flexible Supercapacitor

Phase-Pinned Bicontinuous Structures Reconciling with the Superior Fracture Toughness and Reusability of Ionic Elastomers

Micro-Structural Design of Soft Solid Composite Electrolytes With Enhanced Ionic Conductivity

High-Strength Poly(ethylene oxide) Composite Electrolyte Reinforced with Glass Fiber and Ceramic Electrolyte Simultaneously for Structural Energy Storage

Mechanical and Electrochemical Performance of Hybrid Laminated Structural Composites with Carbon Fiber/ Solid Electrolyte Supercapacitor Interleaves

Bicontinuous Ionogel Electrolyte with Conductive Nanochannels for Flexible Supercapacitors

Quasi‐Solid Composite Polymer Electrolyte‐Based Structural Batteries with High Ionic Conductivity and Excellent Mechanical Properties