3D printing of cellular materials for advanced electrochemical energy storage and conversion

Xiaocong Tian,Kun Zhou

DOI: https://doi.org/10.1039/d0nr00291g

IF: 6.7

2020-01-01

Nanoscale

Abstract:This article provides a comprehensive overview of 3D-printed cellular materials for advanced electrochemical energy storage and conversion applications.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry

What problem does this paper attempt to address?

Synthesis of 3D printing materials and their electrochemical applications

Huijie Zhou,Hui Yang,Shiyi Yao,Li Jiang,Nuochen Sun,Huan Pang

DOI: https://doi.org/10.1016/j.cclet.2021.11.018

IF: 9.1

2021-11-01

Chinese Chemical Letters

Abstract:Three-dimensional (3D) printing, also known as additive manufacturing, has the advantages of low cost, easy structure operation, rapid prototyping, and easy customization. In the past few years, materials with different structures, compositions, and properties have been widely studied as prospects in the field of 3D printing. This paper reviews the synthesis methods and morphologies of one-, two- and three-dimensional micro/nano materials and their composites, as well as their applications in electrochemistry, such as supercapacitors, batteries and electrocatalysis. The latest progress and breakthroughs in the synthesis and application of different structural materials in 3D-printing materials, as well as the challenges and prospects of electrochemical applications, are discussed.

chemistry, multidisciplinary
3D Printing of Next‐generation Electrochemical Energy Storage Devices: from Multiscale to Multimaterial

Xi Xu,Yong Hao Tan,Jun Ding,Cao Guan

DOI: https://doi.org/10.1002/eem2.12175

2021-06-28

Abstract:<p>The increasing energy requirements to power the modern world has driven active research into more advanced electrochemical energy storage devices (EESD) with both high energy densities and power densities. Wide range of newly discovered materials with promising electrochemical properties have shown great potential for next-generation devices, but their performance is normally associated with contradicting demands of thin electrodes and high mass loading that can be hardly achieved for practical applications. Design of three-dimensional (3D) porous electrodes can increase the mass loading while maintaining the effective charge transport even with thick electrodes, which has proven to be efficient to overcome the limitations. 3D structures have also been demonstrated excellent structural stability to withstand strong strains and stresses generated during charge/discharge cycle. 3D printing, which can fabricate various delicate and complex structural designs, thus offering brand-new opportunities for the rational design and facile construction of next-generation EESDs. The recent developments in 3D printing of next-generation EESDs with high performance are reviewed. Advanced/multiscale electrode structures, such as hierarchically porous structure that can be constructed via high resolution 3D printing or with post-treatment, are further emphasized. The ability of current 3D printing techniques to fulfill multi-material printing to fulfill simple packaging will be covered.</p>

materials science, multidisciplinary
Evolution of 3D Printing Methods and Materials for Electrochemical Energy Storage

Vladimir Egorov,Umair Gulzar,Yan Zhang,Siobhán Breen,Colm O'Dwyer

DOI: https://doi.org/10.1002/adma.202000556

2019-12-10

Abstract:Additive manufacturing has revolutionized the building of materials direct from design, allowing high resolution rapid prototyping in complex 3D designs with many materials. 3D printing hasenabled high strength damage-tolerant structures, bioprinted artificial organs and tissues, ultralight metals, medicine, education, prosthetics, architecture, consumer electronics,and as a prototyping tool for engineers and hobbyists alike. 3D printing has emerged as a useful tool for complex electrode and material assembly method for batteries and supercapacitors in recent years. The field initially grew from extrusion-based methods such as fused deposition modelling, and evolved to photopolymerization printing of intricate composites, while supercapacitor technologies less sensitive to solvents more often involved material jetting processes. Underpinning every part of a 3D printable battery and many other devices is the printing method and the nature of the feed material. Material purity, printing fidelity, accuracy, complexity, and the ability to form conductive, ceramic, glassy, or solvent-stable plastics relies on the nature of the feed material or composite to such an extent, that the future of 3D printable batteries and electrochemical energy storage devices will depend on materials and printing methods that are co-operatively informed by the requirements of the device and how it is fabricated. In this Perspective, we address the materials and methods requirements in 3D printable batteries and supercapacitors and outline requirements for the future of the field by linking existing performance limitations to the requirements of printable energy storage materials, casing materials and the direct printing of electrodes and electrolytes. We also look to the future by taking inspiration from additive manufacturing, to posit links between materials and printing methods to allow new form factor cells.

Applied Physics,Materials Science
3D printing technologies for electrochemical energy storage

Feng Zhang,Min Wei,Vilayanur V. Viswanathan,Benjamin Swart,Yuyan Shao,Gang Wu,Chi Zhou

DOI: https://doi.org/10.1016/j.nanoen.2017.08.037

IF: 17.6

2017-10-01

Nano Energy

Abstract:Fabrication and assembly of electrodes and electrolytes play an important role in promoting the performance of electrochemical energy storage (EES) devices such as batteries and supercapacitors. Traditional fabrication techniques have limitations in controlling the geometry and architecture of the electrode and solid-state electrolytes, which would otherwise compromise the performance. 3D printing, a disruptive manufacturing technology, has emerged as an innovative approach to fabricating EES devices from nanoscale to macroscale, providing great opportunities to accurately control device geometry (e.g., dimension, porosity, and morphology) and structure with enhanced specific energy and power densities. Moreover, the “additive” manufacturing nature of 3D printing provides excellent controllability of the electrode thickness with much simplified process in a cost effective manner. With the unique spatial and temporal material manipulation capability, 3D printing can integrate multiple nano-materials in the same print, and multi-functional EES devices (including functional gradient devices) can be fabricated. Herein, we review recent advances in 3D printing of EES devices. We focus on two major 3D printing technologies including direct writing and inkjet printing. The direct material deposition characteristics of these two processes enable them to print on a variety of flat substrates, even a conformal one, well suiting them to applications such as wearable devices and on-chip integrations. Other potential 3D printing techniques such as freeze nano-printing, stereolithography, fused deposition modeling, binder jetting, laminated object manufacturing, and metal 3D printing are also introduced. The advantages and limitations of each 3D printing technology are extensively discussed. More importantly, we provide a perspective on how to integrate the emerging 3D printing with existing technologies to create structures over multiple length scale from nano to macro for EES applications.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
A universal strategy towards 3D printable nanomaterial inks for superior cellular high-loading battery electrodes

Xiaocong Tian,Teng Wang,Hui Ma,Kang Tang,Shuen Hou,Hongyun Jin,Guozhong Cao

DOI: https://doi.org/10.1039/d1ta03236d

IF: 11.9

2021-01-01

Journal of Materials Chemistry A

Abstract:A universal strategy towards 3D printable nanomaterial inks is reported for cellular batteries, where superior electrochemical performance is demonstrated with high mass loading.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Additive manufacturing for energy storage: Methods, designs and materials selection for customizable 3D printed batteries and supercapacitors

Umair Gulzar,Colm Glynn,Colm O'Dwyer

DOI: https://doi.org/10.48550/arXiv.1912.04755

2019-12-10

Applied Physics

Abstract:Additive manufacturing and 3D printing in particular have the potential to revolutionize existing fabrication processes where objects with complex structures and shapes can be built with multifunctional material systems. For electrochemical energy storage devices such as batteries and supercapacitors, 3D printing methods allows alternative form factors to be conceived based on the end use application need in mind at the design stage. Additively manufactured energy storage devices require active materials and composites that are printable and this is influenced by performance requirements and the basic electrochemistry. The interplay between electrochemical response, stability, material type, object complexity and end use application are key to realising 3D printing for electrochemical energy storage. Here, we summarise recent advances and highlight the important role of methods, designs and material selection for energy storage devices made by 3D printing, which is general to the majority of methods in use currently.
Three-dimensional printed carbon-based microbatteries: progress on technologies, materials and applications

Su-jiao He,Kai-qiang Zhang,Ya-jun Zou,Zhi-hong Tian

DOI: https://doi.org/10.1016/s1872-5805(22)60634-6

IF: 5.7

2022-10-01

New Carbon Materials

Abstract:Next-generation wearable and portable devices require rechargeable microbatteries to provide energy storage. Three-dimensional (3D) printing, with its ability to build geometrically complex 3D structures, enables the manufacture of microbatteries of different sizes and shapes, and with high energy and power densities. Lightweight carbon materials have a great advantage over other porous metals as electrode materials for rechargeable batteries, because of their large specific surface area, superior electrical conductivity and high chemical stability. In recent years, a variety of rechargeable microbatteries of different types have been successfully printed using carbon-based inks. To optimize their electrochemical performance and extend their potential applications, it is important to analyze the design principles with respect to the 3D printing technique, printable carbon materials and promising applications. This paper provides a perspective on recent progress in the four major 3D printing techniques, elaborates on conductive carbon materials in addressing the challenging issues of 3D printed microbatteries, and summarizes their applications in a number of energy storage devices that integrate with wearable electronics. Current challenges and future opportunities for carbon-based microbattery fabrication by 3D printing techniques are discussed.

materials science, multidisciplinary
Design and Manufacture of 3D-Printed Batteries

Zhiyang Lyu,Gwendolyn J.H. Lim,J. Justin Koh,Yi Li,Yanwen Ma,Jun Ding,Jinlan Wang,Zheng Hu,John Wang,Wei Chen,Yunfei Chen

DOI: https://doi.org/10.1016/j.joule.2020.11.010

IF: 46.048

2021-01-01

Joule

Abstract:3D-printed batteries have emerged as a class of unique energy storage devices with outstanding features of microscale dimensions and aesthetic diversity, which are vital to miniaturized and customized electronics. Understanding 3D printing designs in battery materials and architectures is key to optimize performance and realize the customization of 3D-printed batteries. In this Review, we summarize the latest advances in 3D-printed batteries with respect to the connection between printable materials and printing techniques as well as the rational design considerations. We first introduce unique features of 3D printing techniques, subsequently focusing on the printable battery modules and general approaches to making them printable. Thereafter, we examine the prominent roles of 3D printing designs in the module architectures, battery configurations, and effective solutions that help resolve issues that hamper batteries' performance. We conclude by discussing further research directions in terms of functional materials, advanced printing technologies, and new device designs.

materials science, multidisciplinary,chemistry, physical,energy & fuels
3D printing critical materials for rechargeable batteries: from materials, design and optimization strategies to applications

Mu Yongbiao,Chu Youqi,Lyuming Pan,Wu Buke,Zou Lingfeng,He Jiafeng,Han Meisheng,Zhao Tianshou,Lin Zeng

DOI: https://doi.org/10.1088/2631-7990/acf172

2023-08-18

International Journal of Extreme Manufacturing

Abstract:Three-dimensional (3D) printing, one of the additive manufacturing techniques, is being broadly utilized to develop a variety of electrochemical energy storage devices (EESDs) (for instance, batteries, super-capacitors) from the nanoscale to the macroscale due to its excellent manufacturing flexibility, geometric designability, low cost, and eco-friendliness. Recent studies have reported the usage of 3D-printed critical materials for EESDs, which have demonstrated excellent electrochemical performances, including high energy densities and rate capabilities, due to the improved ion/electron transport abilities, and fast kinetics. However, the recent structural design and application of 3D printed critical materials for EESDs, especially rechargeable batteries, have been rarely summarized and discussed in the latest reported reviews. In this review, we concentrate on current progresses in 3D printing critical materials of emerging batteries. We begin by outlining the typical features of major 3D-printing methods used for fabricating EESDs, including design principles, materials selectivity, and optimization strategies. We then summarize recent progress in 3D-printed critical materials (anode, cathode, electrolyte, separator, and current collector) for secondary batteries, including conventional Li-ion (Na-ion (SIBs), K-ion (KIBs)) batteries, Li/Na/K/Zn metal batteries, Zn-air, and Ni-Fe batteries, in which the section of 3D printing precursor, the design principle of 3D structures, and the working mechanism of electrodes are discussed. In the end, we discuss the major challenges and potential applications in developing 3D-printed critical materials for rechargeable batteries. Keywords: additive manufacturing; 3D printing; rechargeable batteries; electrochemical energy storage devices; lithium-ion battery.

engineering, manufacturing,materials science, multidisciplinary
3D‐Printed Wearable Electrochemical Energy Devices

Shuai Zhang,Yuqing Liu,Junnan Hao,Gordon G. Wallace,Stephen Beirne,Jun Chen

DOI: https://doi.org/10.1002/adfm.202103092

IF: 19

2021-07-29

Advanced Functional Materials

Abstract:Emerging markets for wearable electronics have stimulated a rapidly growing demand for the commercialization of flexible and reliable energy storage and conversion units (including batteries, supercapacitors, and thermoelectrochemical cells). 3D printing, a rapidly growing suite of fabrication technologies, is extensively used in the above-mentioned energy-related areas owing to its relatively low cost, freedom of design, and controllable, reproducible prototyping capability. However, there remain challenges in processable ink formulation and accurate material/device design. By summarizing the recent progress in 3D-printed wearable electrochemical energy devices and discussing the current limitations and future perspectives, this article is expected to serve as a reference for the scalable fabrication of advanced energy systems via 3D printing.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
3D printed energy devices: generation, conversion, and storage

Jin-ho Son,Hongseok Kim,Yoonseob Choi,Howon Lee

DOI: https://doi.org/10.1038/s41378-024-00708-2

2024-07-02

Microsystems & Nanoengineering

Abstract:Abstract The energy devices for generation, conversion, and storage of electricity are widely used across diverse aspects of human life and various industry. Three-dimensional (3D) printing has emerged as a promising technology for the fabrication of energy devices due to its unique capability of manufacturing complex shapes across different length scales. 3D-printed energy devices can have intricate 3D structures for significant performance enhancement, which are otherwise impossible to achieve through conventional manufacturing methods. Furthermore, recent progress has witnessed that 3D-printed energy devices with micro-lattice structures surpass their bulk counterparts in terms of mechanical properties as well as electrical performances. While existing literature focuses mostly on specific aspects of individual printed energy devices, a brief overview collectively covering the wide landscape of energy applications is lacking. This review provides a concise summary of recent advancements of 3D-printed energy devices. We classify these devices into three functional categories; generation, conversion, and storage of energy, offering insight on the recent progress within each category. Furthermore, current challenges and future prospects associated with 3D-printed energy devices are discussed, emphasizing their potential to advance sustainable energy solutions.

nanoscience & nanotechnology,instruments & instrumentation
Progress in 3D Printing of Carbon Materials for Energy‐Related Applications

Kun Fu,Yonggang Yao,Jiaqi Dai,Liangbing Hu

DOI: https://doi.org/10.1002/adma.201603486

IF: 29.4

2016-12-16

Advanced Materials

Abstract:The additive-manufacturing (AM) technique, known as three-dimensional (3D) printing, has attracted much attention in industry and academia in recent years. 3D printing has been developed for a variety of applications. Printable inks are the most important component for 3D printing, and are related to the materials, the printing method, and the structures of the final 3D-printed products. Carbon materials, due to their good chemical stability and versatile nanostructure, have been widely used in 3D printing for different applications. Good inks are mainly based on volatile solutions having carbon materials as fillers such as graphene oxide (GO), carbon nanotubes (CNT), carbon blacks, and solvent, as well as polymers and other additives. Studies of carbon materials in 3D printing, especially GO-based materials, have been extensively reported for energy-related applications. In these circumstances, understanding the very recent developments of 3D-printed carbon materials and their extended applications to address energy-related challenges and bring new concepts for material designs are becoming urgent and important. Here, recent developments in 3D printing of emerging devices for energy-related applications are reviewed, including energy-storage applications, electronic circuits, and thermal-energy applications at high temperature. To close, a conclusion and outlook are provided, pointing out future designs and developments of 3D-printing technology based on carbon materials for energy-related applications and beyond.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
3D printing of hierarchically micro/nanostructured electrodes for high-performance rechargeable batteries

Rui Wang,Youfang Zhang,Wen Xi,Junpu Zhang,Yansheng Gong,Beibei He,Huanwen Wang,Jun Jin

DOI: https://doi.org/10.1039/d3nr03098a

IF: 6.7

2023-01-01

Nanoscale

Abstract:3D printing, also known as additive manufacturing, is capable of fabricating 3D hierarchical micro/nanostructures by depositing a layer-upon-layer of precursor materials and solvent-based inks under the assistance of computer-aided design...

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
The status and challenging perspectives of 3D-printed micro-batteries

Jiaxin Ma,Shuanghao Zheng,Yinghua Fu,Xiao Wang,Jieqiong Qin,Zhong-Shuai Wu

DOI: https://doi.org/10.1039/d3sc06999k

2024-03-12

Abstract:In the era of the Internet of Things and wearable electronics, 3D-printed micro-batteries with miniaturization, aesthetic diversity and high aspect ratio, have emerged as a recent innovation that solves the problems of limited design diversity, poor flexibility and low mass loading of materials associated with traditional power sources restricted by the slurry-casting method. Thus, a comprehensive understanding of the rational design of 3D-printed materials, inks, methods, configurations and systems is critical to optimize the electrochemical performance of customizable 3D-printed micro-batteries. In this review, we offer a key overview and systematic discussion on 3D-printed micro-batteries, emphasizing the close relationship between printable materials and printing technology, as well as the reasonable design of inks. Initially, we compare the distinct characteristics of various printing technologies, and subsequently emphatically expound the printable components of micro-batteries and general approaches to prepare printable inks. After that, we focus on the outstanding role played by 3D printing design in the device architecture, battery configuration, performance improvement, and system integration. Finally, the future challenges and perspectives concerning high-performance 3D-printed micro-batteries are adequately highlighted and discussed. This comprehensive discussion aims at providing a blueprint for the design and construction of next-generation 3D-printed micro-batteries.
Materials for 3D Printed Metal and Metal‐Ion Batteries

Tomás García Rodríguez,Jesus I. Medina Santos,João Coelho,Sergio Pinilla

DOI: https://doi.org/10.1002/celc.202400206

IF: 4

2024-05-18

ChemElectroChem

Abstract:3D printing of batteries, also known as additive manufacturing, has the potential to create flexible, smaller, lighter, and more cost‐effective batteries than those currently available. This review presents the latest advances in electroactive materials, deposition methods, and electrolyte choices for advanced printed batteries. The review provides an overview of the latest innovations, trends, and challenges in the field of 3D‐printed metal and metal‐ion batteries. It focuses on the materials used in the printing of batteries, including electrodes, electrolytes, and other electroactive components. Compared to other high‐quality reviews on the topic, this review provides a broader selection of materials that are expected to gain attention in the next few years, such as redox‐active polymers and metal‐organic frameworks. This work gives an overview and insight into the latest trends in printing techniques as well as a statistical review of their uses and strengths. We have also gathered the latest works done for each of the material types, and we have taken the opportunity to put them in context and use them to exemplify in which direction is the field going. The review concludes with a critical view of the challenges ahead and a discussion of the direction that the field is taking as well as the external factors that might help to define its future.

electrochemistry
3D Architectures: 3D MXene Architectures for Efficient Energy Storage and Conversion (Adv. Funct. Mater. 47/2020)

Ke Li,Meiying Liang,Hao Wang,Xuehang Wang,Yanshan Huang,João Coelho,Sergio Pinilla,Yonglai Zhang,Fangwei Qi,Valeria Nicolosi,Yuxi Xu

DOI: https://doi.org/10.1002/adfm.202070306

IF: 19

2020-11-01

Advanced Functional Materials

Abstract:<p>In article number <a href="https://doi.org/10.1002/adfm.202000842">2000842</a>, Valeria Nicolosi, Yuxi Xu, and co‐workers review the commonly used strategies for manufacturing 3D MXene architectures. Special attention is also given to understand the structure‐property relationships of 3D MXene architectures and highlight their promising applications in electrochemical energy storage and conversion, including supercapacitors, rechargeable batteries, and electrocatalysis. </p>

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
3D Printing Manufacturing of Lithium Batteries: Prospects and Challenges Toward Practical Applications

Sida Huo,Li Sheng,Ben Su,Wendong Xue,Li Wang,Hong Xu,Xiangming He

DOI: https://doi.org/10.1002/adma.202310396

IF: 29.4

2023-11-22

Advanced Materials

Abstract:Abstract The manufacturing and assembly of components within cells have a direct impact on the sample performance. Conventional processes restrict the shapes, dimensions, and structures of the commercially available batteries. Three‐dimensional (3D) printing, a novel manufacturing process for precision and practicality, is expected to revolutionize the lithium battery industry owing to its advantages of customization, mechanization, and intelligence. This technique can be used to effectively construct intricate 3D structures that enhance the designability, integrity, and electrochemical performance of both liquid‐ and solid‐state lithium batteries. In this study, we provide an overview of the development of 3D printing technologies and assess their suitability for comparison with conventional printing processes. Various 3D printing technologies applicable to lithium‐ion batteries have been systematically introduced, especially more practical composite printing technologies. The practicality, limitations, and optimization of 3D printing are discussed dialectically for various battery modules, including electrodes, electrolytes, and functional architectures. In addition, all‐printed batteries are emphatically introduced. Finally, the prospects and challenges of 3D printing in the battery industry were evaluated. This article is protected by copyright. All rights reserved

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
A minireview on 3D printing for electrochemical water splitting electrodes and cells

Yanran Xun,Kaixi Zhang,Win Jonhson,Jun Ding

DOI: https://doi.org/10.1063/5.0138178

IF: 6.6351

2023-06-01

APL Materials

Abstract:The adoption of additive manufacturing (also known as 3D printing) for electrochemically related applications is receiving increased attention from the research community, particularly for water electrolysis driven by renewable energy. Additive manufacturing has demonstrated its great potential in the structural design of complex geometry and customization. Given the recent development of several fast-prototyping materials and methods, examining the gaps of electrocatalytic electrode materials and apparatus between the lab scale and industrial scale is important. In this paper, we have summarized the state-of-art 3D printing technologies and 3D printing techniques used in water electrolysis systems—both electrodes and reaction cells. The suitability and advantages of 3D printing methods in developing and designing water-splitting reaction systems are thoroughly discussed. In addition, recent progress demonstrating 3D-printed electrodes and water-splitting cells is reviewed. Finally, future directions for this developing field of research are given along with current difficulties.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology
3D printing MXene‐based electrodes for supercapacitors

Xudong Jiang,Juan Bai,Binodhya Wijerathne,Qianqin Zhou,Fan Zhang,Ting Liao,Ziqi Sun

DOI: https://doi.org/10.1002/asia.202400568

2024-08-21

Chemistry - An Asian Journal

Abstract:3D printing, as an advanced and promising strategy for processing electrode for energy storage devices, such as supercapacitors and batteries, has garnered considerable interest in recent decades. The interest in 3D printed electrodes stems from its exceptional performance and manufacturing features, including customized sizes and shapes and the layer‐by‐layer processing principle, etc., especially integrating with MXene which allows the manufacturing of electrodes from different raw materials and possessing desired electrochemical properties. Herculean challenges, such as material compatibility of the printing inks, nondurable interfacial or bulk mechanical strength of the printed electrodes, and sometimes the low capacitance, lead to inferior electrochemical performance and hinder the practical applications of this promising technology. In this review, we firstly summarize the representative 3D printing methods, then, review the MXene‐based 3D printing electrodes made from different materials, and last, provide electrochemical performance of 3D printing MXene‐based electrodes for supercapacitors. Furthermore, based on a summary on the recent progress, an outlook on these promising electrodes for sustainable energy devices is provided. We anticipate that this review could provide some insights into overcoming the challenges and achieving more remarkable electrochemical performance of 3D printing supercapacitor electrodes and offer perspectives in the future for emerging energy devices.

chemistry, multidisciplinary
(Invited) 3D Carbon-Based Hierarchical Electrodes for Energy Storage

Jennifer Lu,Samuel Chiovoloni,Austin Ashworth,Philip Onffroy,Bin Yao,Max Saccone,Joseph DeSimone,Yat Li

DOI: https://doi.org/10.1149/ma2024-017812mtgabs

2024-08-09

ECS Meeting Abstracts

Abstract:Abstract: Carbon-based 3D hierarchical electrodes with appropriate spatial distributions of pores are expected to empower rapid and controllable electrochemical reactions. The ability to fabricate such an electrode, with tunable geometries comprised of continuous nano- and micro-conduits, allows simultaneous optimization of conversion capacity as well as reaction rate. Such manufacturability holds great potential to redefine the future of energy storage, electrocatalysis and chemical production for a sustainable future. In this presentation, I will outline two convergent strategies that involve the integration of additive manufacturing with several decades of advancements in nanomaterials synthesis, coupled with conventional pyrolysis – for creating such electrodes. The primary structure of 3D carbon-based electrodes was fabricated by either direct 3D writing, or the transition metal assisted pyrolysis of 3D-printed polymer templates. The secondary structure was established by employing bottom-up synthesis approaches: (a) SiO 2 nanoparticle templates to create nanoscopic porous structures or (b) nanochannels formed through direct growth of carbon nanotubes. We have demonstrated that the primary and secondary structures can be formed by a single step. After monolithic integration of a tertiary structure to reveal sites for electrochemical conversion, these 3D architected electrodes offer impressive charge storage capacities while maintain excellent rate capability. By exploiting the short mass diffusion lengths, we have demonstrated that the new energy storage devices can operate at temperatures as low as -70°C without the requirement of a heater. Furthermore, the incorporation of a high loading of active materials in our 3D electrodes allows for concurrent enhancement of both energy density and power density. These scalable fabrication protocols address two critical challenges – sluggish mass transfer in 3D and the lack of accessible active sites, thereby offering a pathway to harness electrochemical reactions in 3D. This work offers an adaptable solution across a broad spectrum of industries.

3D printing of cellular materials for advanced electrochemical energy storage and conversion

Synthesis of 3D printing materials and their electrochemical applications

3D Printing of Next‐generation Electrochemical Energy Storage Devices: from Multiscale to Multimaterial

Evolution of 3D Printing Methods and Materials for Electrochemical Energy Storage

3D printing technologies for electrochemical energy storage

A universal strategy towards 3D printable nanomaterial inks for superior cellular high-loading battery electrodes

Additive manufacturing for energy storage: Methods, designs and materials selection for customizable 3D printed batteries and supercapacitors

Three-dimensional printed carbon-based microbatteries: progress on technologies, materials and applications

Design and Manufacture of 3D-Printed Batteries

3D printing critical materials for rechargeable batteries: from materials, design and optimization strategies to applications

3D‐Printed Wearable Electrochemical Energy Devices

3D printed energy devices: generation, conversion, and storage

Progress in 3D Printing of Carbon Materials for Energy‐Related Applications

3D printing of hierarchically micro/nanostructured electrodes for high-performance rechargeable batteries

The status and challenging perspectives of 3D-printed micro-batteries

Materials for 3D Printed Metal and Metal‐Ion Batteries

3D Architectures: 3D MXene Architectures for Efficient Energy Storage and Conversion (Adv. Funct. Mater. 47/2020)

3D Printing Manufacturing of Lithium Batteries: Prospects and Challenges Toward Practical Applications

A minireview on 3D printing for electrochemical water splitting electrodes and cells

3D printing MXene‐based electrodes for supercapacitors

(Invited) 3D Carbon-Based Hierarchical Electrodes for Energy Storage