Abstract:In the field of smart materials, microencapsulated self-healing technology has received a lot of attention in recent years. However, the existing microcapsule preparation techniques continue to have difficulties controlling the structural parameters of microcapsules at the microscopic scale, and there are difficulties in investigating the mechanical properties of microcapsules based on a single structural parameter experimentally. In addition, the commonly used Finite Element Method (FEM) also has significant limitations in investigating dynamic damage problems in non-homogeneous, discontinuous materials. To address the aforementioned issues, the Discrete Element Method (DEM) is used to create a numerical model of a single microcapsule. The reliability and feasibility of the discrete element model are demonstrated by utilizing the microcapsule's mechanical intrinsic model and experiments. Further, the discrete element models are employed to analyze the influence of microcapsule structure/material parameters on the crack resistance and fracturability of a single microcapsule, discuss the micromechanics of the microcapsule damage process, and predict the rupture mode and rupture location of a single microcapsule. It is shown that (1) the larger the wall thickness and smaller the diameter of the microcapsule, the stronger the deformation resistance of the microcapsule, but the rupture load and nominal rupture stress increase linearly with the increase of wall thickness and decrease nonlinearly with the increase of diameter; (2) the maximum stress field during compression of small deformation microcapsules occurs in the polar region, and the initial scattered damage appears in the polar region, also the scattered damage gradually develop into one or more main cracks along the meridian and (3) large deformation microcapsule compression through three stages of elastic deformation, plastic deformation and hardening, and gradually occur three kinds of the morphology of "spherical", "drum-shaped" and "butterfly-shaped", while rupture after producing scattered cracks and fragments in the near-polar region.

Micro-scale study of microcapsule cracking performance based on XFEM and fluid cavity model

An micro-level study on the cracking performance of encapsulation-based self-healing resin mineral composites under dynamic load based on XFEM

A two-dimensional micromechanical damage-healing model on microcrack-induced damage for microcapsule-enabled self-healing cementitious composites under tensile loading

Investigation on Microcapsule Self‐healing Mechanism of Polymer Matrix Composites Based on Numerical Simulation

Mesoscopic study on mechanical properties and dynamic damage characteristics of self-healing microcapsule

XFEM and machine learning combined approach for failure prediction of microcapsules in cement-based self-healing materials

Mesoscopic Cohesive Crack Model of Microcapsule Self-Healing Concrete and Its Uniaxial and Triaxial Compression Simulation

Two-scale modeling of particle crack initiation and propagation in particle-reinforced composites by using microscale analysis based on Voronoi cell finite element model

The effects of interfacial strength on fractured microcapsule

Constitutive Model and Damage of Self-Healing 3D Braided Composites with Microcapsules

A Numerical Method for Simulating the Microscopic Damage Evolution in Composites under Uniaxial Transverse Tension

Molecular Simulation Study on Mechanical Properties of Microcapsule-Based Self-Healing Cementitious Materials

Study on crack resistance of self-healing microcapsules in asphalt pavement by multi-scale method

Mesoscale modeling of dynamic compressive behavior of microcapsule-based self-healing concrete under impact loading

A Monte Carlo simulation of damage and failure process with crack saturation for unidirectional fiber reinforced ceramic composites

Micromechanical Analysis of Microcrack-Induced Residual Strains in Quasi-Brittle Solids

Simulation of Microcapsule Transport in Fractured Media Using Coupled CFD‐DEM

A statistical micromechanical model of multiple cracking for ultra high toughness cementitious composites

Constitutive relations, mechanical behaviour, and failure criterion of microcapsule-based self-healing concrete under uniaxial and triaxial compression

Performance of microcapsule-based self-healing concrete under multiaxial compression with large axial strain: Mechanical properties failure mode, and pore structure

Mechanical responses of microencapsulated self-healing cementitious composites under compressive loading based on a micromechanical damage-healing model