Abstract:Dendrite growth velocity as a function of initial bulk undercooling was systematically studied in situ using high speed thermal imaging of highly undercooled Ni90Cu10 and Ni95Cu5 single phase alloy melts. For these two non-dilute concentrated alloys, the dendrite growth velocity first increased continuously at small and mediate undercooling regimes and then discontinuously to a maximum value at the high undercooling range. A clear plateau appeared in the growth velocity-undercooling curve revealed a gradual transition from mainly solute-controlled growth to mainly thermal-controlled growth, which was very similar to the solidification characteristics of a dilute alloy. The discontinuity appeared in the growth velocity-undercooling relationship was suggested to be induced by the finite solute diffusion speed in the bulk melt ahead of the advancing solid-liquid interface. Microstructure, substructure and microtexture of the two undercooled alloys were characterized using EBSD technique, and the fundamental mechanism behind “spontaneous grain refinement” is elucidated. The microstructure evolution indicated two kinds of grain refinements: one was dendrite remelting induced grain refinement and the other was recrystallization induced grain refinement. It was found that the texture of the as-solidified microstructure was getting more and more random as the initial bulk undercooling increased, which was due to the increased stress and recrystallization in the as-solidified microstructure. New evidence of grain refinement was found in the as-solidified samples. We found that the samples undercooled beyond the critical undercooling had a grain refined microstructure and that this corresponded with a clear discontinuity in the dendrite growth velocity-undercooling curve. Microstructural data suggested that in Ni-Cu alloys grain refinement at a high undercooling was a consequence of a recrystallization process, which contrasted with conventional grain refined alloys where grain refinement appeared to be the result of remelting-induced dendritic fragmentation.

In-situ observation of grain refinement dynamics of hypoeutectic Al-Si alloy inoculated by Al-Ti-Nb-B alloy

Novel Al-Ti-Nb-B grain refiners with superior efficiency for Al-Si alloys

Observation of Dendrite Growth Velocity and Microstructure Transition in Highly Undercooled Single Phase Alloys

In-situ Quantitative Investigation of the Growth Inhibition Effect of TiCN Nanoparticles on Primary Α-Al in Al-Cu-Si Alloys

Microstructure and mechanical properties of non-heat-treated Al-8Si-0.2Mg-0.5Mn alloy inoculated by Al-Nb-B refiner

Observation of crystal nuclei of aluminum refined by Al-Ti-B master alloy

Revealing the mechanism of grain refinement and anti Si-poisoning induced by (Nb, Ti)B2 with a sandwich-like structure

In situ observation of competitive growth of α grains during β → α transformation in laser beam manufactured TiAl alloys

Solidification microstructure manipulation mechanism of hypoeutectic and hypereutectic Al-Si alloys controlled by trace in-situ nano-Fe 2 B and nano-Fe 3 Si

In Situ Investigation of the Heterogeneous Nucleation Sequence in Al-15 Weight Percent Cu Alloy Inoculated by Al-Ti-B

Atomic insights into heterogeneous nucleation and growth kinetics of Al on TiB<sub>2</sub> particles in undercooled Al-5Ti-1B melt

Synergistic Effect of La and TiB2 Particles on Grain Refinement in Aluminum Alloy

In Situ Investigation of the Solidification of Al-20 Wt.% Zn Alloys Inoculated by Al-5Ti-1B

In-situ Observations of Grain Refinement by TiN Particles in the Simulated Coarse-Grained Heat-Affected Zone of a High-Strength Low-Alloy Steel

Development of Al–Nb–B master alloy with high Nb/B ratio for grain refinement of hypoeutectic Al–Si cast alloys

Heterogenous Grain Nucleation in Al-Si Alloys: Types of Nucleant Inoculation

Influence of Fe on grain nucleation and growth of pure aluminum during refining by Al-Ti-B and Al-Ti-C master alloys

Influence of Si on grain refinement efficiency of Al-Ti-B and Al-Ti-C master alloys

In Situ Investigation of Si-Poisoning Effect in Al–Cu–Si Alloys Inoculated by Al–5Ti–1B

Grain Refinement Mechanisms of TiC0.5N0.5 Nanoparticles in Aluminum

Effectively Refining Al-10Si Alloy Via Al-Ti-Nb-B Refiner with Nb2O5