Abstract:The ultra-wideband rectenna is designed to have a fractional bandwidth of more than 100%, allowing it to work from 1.4 GHz to 5.4 GHz, with a bandwidth of 4 GHz. The proposed design involves a square patch antenna that incorporates an inverted L-slot and utilises dual ground planes in the form of rectangular and semi-octagonal shapes. The intended rectenna simultaneously harvests energy from various frequency bands, including GSM 1800 MHz, UTMS 2100 MHz, ISM 2450 MHz, 2800 MHz, and 3600 MHz. The proposed rectifier circuit incorporates three impedance-matching (IM) branches, which effectively mitigate the nonlinear attributes of the rectifier system and ensure favourable IM across a broad spectrum of frequencies. The DC combining technique is employed to attain favourable conversion efficiency. The CE in the GSM 1800 MHz band was measured to be 74%. The CE in the UTMS 2100 MHz band was measured to be 66%. In the ISM2450 MHz frequency band, a CE of 76% was measured. The CE in the 2800 MHz frequency band was determined to be 67.5%. At 3600 MHz, the measured CE is recorded as 67%. The obtained optimal load value is 470 Ω and it provides more than 65% conversion efficiency (CE) at all the intended frequency bands. The proposed rectenna demonstrates an CE exceeding 50% across the entire range of input power level (IPL) variations from 0 to 11 dBm. Furthermore, it achieves an efficiency surpassing 60% when subjected to load variations ranging from 270 Ω to 750 Ω.

A Prototype of a 900 MHz Band Integrated Rectenna by Using a Planar Monopole Antenna With Feeder

High-Efficiency 2-D Multibeam Rectenna Based on Gain Enhanced Patch Array

Design and experiments of a high-conversion-efficiency 5.8-GHz rectenna

A Circularly Polarized Implantable Rectenna for Microwave Wireless Power Transfer

Design of high‐efficiency rectenna for microwave power wireless transmission systems

Robust broadband dual-polarized rectenna with high conversion efficiency

Rectenna Design with High Efficiency at Lower Input Power Density for Sensor Network Applications

All-Polarized Wideband Rectenna With Enhanced Efficiency Within Wide Input Power and Load Ranges

Ultra-wideband rectenna with the dual ground plane for wide dynamic input power and load range

Efficiency Enhanced Seven-Band Omnidirectional Rectenna for RF Energy Harvesting

A 5.8 GHz Circularly Polarized Rectenna With Harmonic Suppression and Rectenna Array for Wireless Power Transfer

A broadband Millimeter-Wave rectenna using substrate Integrated Waveguide

A Dual-Polarized Rectenna with High Efficiency at Low Input Power Density

A W -Band 2 × 2 Rectenna Array With On-Chip CMOS Switching Rectifier and On-PCB Tapered Slot Antenna for Wireless Power Transfer

A Compact Rectenna with Flat-Top Angular Coverage for RF Energy Harvesting

Designing and Modeling of a Dual-Band Rectenna with Compact Dielectric Resonator Antenna

Design and optimization of broadband CPW rectenna for RF energy harvesting

A Novel Six-Band Dual CP Rectenna Using Improved Impedance Matching Technique for Ambient RF Energy Harvesting

Design of Dual ISM Bands Low Power Rectenna for Indoor Wireless Power Transfer Application

A Compact and High-Power Rectenna Array for Wireless Power Transmission Applications

Dual-Band Antenna And High Efficiency Rectifier For Rf Energy Harvesting System