Abstract:The film capacitor, one typical type of electrostatic capacitors, exhibits its unique advantages in the high-power energy storage devices operating at a high electric field due to the high electrical breakdown strength (Eb) of the polymeric films. However, the development of film capacitor towards high energy storage density is severely hindered by the low dielectric constant (ε) and low charge-discharge efficiency (η) of the polymeric films. The film of polypropylene (PP), the most used polymeric film with a market share of 50%, owns a high η due to its low inherent hysteresis loss. Yet the low ε (2.2 at 103 Hz) impedes the increase of its energy storage density (1-2 J/cm3). Here we demonstrate that the discharged energy density (Ue) of PP film could be largely increased from 1.40 J/cm3 of pure PP film to 3.86 J/cm3 of PP nanocomposite film by incorporating a small loading of core-shell structured 3 () nanoparticles (2.27 vol%) into PP matrix. The obtained Ue of 3.86 J/cm3, to the best of our knowledge, is the highest reported value for the PP based films using commercial PP resin. Meanwhile, the η merely undergoes a slight decrease from 99.5% to 94.1%. Similarly, the obtained η of 94.1%, to the best of our knowledge, is also the highest value for the polymeric films reported in the previous works. The significant increase of Ue (175.7%) and negligible decrease of η (5.4%) are mainly attributed to the increase of ε from 2.2 to 3.7 and Eb from 361 MV/m to 448 MV/m. Compared with the films of raw BT/PP nanocomposites, the Ue exhibits a significant increase of 365.1% from 0.83 J/cm3 to 3.86 J/cm3 and the η also displays an increase of 7.4% from 87.6% to 94.1%. The significant improvement of energy storage performance achieved in the film of /PP nanocomposite suggests that the organic PMMA shell plays an important role in the amelioration of compatibility of BT nanoparticles and PP matrix and the alleviation of local electric field concentration. Moreover, the PMMA shell could also provide a robust scaffold to hinder the early breakdown failure of nanocomposites due to its high Eb (425 MV/m). Thus, high ε, low loss and high Eb were simultaneously achieved. Specifically, the high hot stretch ratio (1:4) of nanocomposite film indicates the strong feasibility of industrialized film processing. Apart from the experimental analysis, theoretical analysis using the simulation of finite element is also carried out to figure out the influence of organic PMMA shell on the dielectric performance of PP nanocomposites films. These findings enable the development of film capacitor using non-polar PP based film towards high energy storage density.

Influence of organic Na+-MMT on the dielectric and energy storage properties of maleic anhydride-functionalized polypropylene nanocomposites

Effect of organic Na + ‐montmorillonite on the dielectric and energy storage properties of polypropylene nanocomposites with polypropylene‐graft‐maleic anhydride as compatibilizer

Achieving Higher Dielectric and Energy Storage Performances of Methyl Methacrylate-co-glycidyl Methacrylate Films Through the Nanocomposite Strategy

Enhanced Energy Storage Properties Of Polypropylene/Maleic Anhydride-Grafted Polypropylene/Nano-Zro2 Ternary System

Significantly Improved Energy Storage Density of Polypropylene Nanocomposites Via Macroscopic and Mesoscopic Structure Designs

Polyethylene/maleic Anhydride Grafted Polyethylene/organic‐montmorillonite Nanocomposites. I. Preparation, Microstructure, and Mechanical Properties

High energy density and discharge efficiency polypropylene nanocomposites for potential high-power capacitor

Enhancing energy storage property of polypropylene‐based sandwich composites with surface‐modified nonzero dimensional nanomaterials

Improved Compatibility and DC Breakdown Strength of Polypropylene/Maleic Anhydride Grafted Polypropylene/Nano-ZrO2 Ternary System

Enhanced Energy Storage Properties of PP/PA11 Dielectric Composite Films With PP‐g‐MAH as Compatibilizer

Preparation of PP/MgO Nanocomposite Films and Study on Its Dielectric Properties

Interface-modulated nanocomposites based on polypropylene for high-temperature energy storage

Polarization Characteristics of the High-Dielectric Interface in MgO/PP Nanocomposite Dielectrics

The influence of organic montmorillonite on the breakdown strength and energy density of poly(vinylidene fluoride)‐based nanocomposites

Improved dielectric, tensile and energy storage properties of surface rubberized BaTiO3/polypropylene nanocomposites

Enhanced Energy Storage Property of Polypropylene/ N-Benzene Based Maleamidic Acid Grafted Polypropylene/Nano-ZrO2

Dielectric Film with High Energy Density Based on Polypropylene/maleic Anhydride-Grafted Polypropylene/boron Nitride Nanosheet Ternary System

All-Organic Dielectrics with High Breakdown Strength and Energy Storage Density for High-Power Capacitors

Carrier Transport and Molecular Displacement Modulated Dc Electrical Breakdown of Polypropylene Nanocomposites

Enhanced dielectric, energy storage and tensile properties of BaTiO3–NH2/low-density polyethylene nanocomposites with POE-GMA as interfacial modifier

Experimental Study on Space Charge and Electrical Strength of MgO Nano-Particles/polypropylene Composite