Abstract:Purpose The purpose of this paper is to develop thermal modelling to investigate the thermal response of sample boards (at board level) during the preheating stage of the reflow process and to validate with experimental measurements. Design/methodology/approach A thermal‐coupling method that adopted the Multi‐physics Code Coupling Interface (MpCCI) was utilized. A forced‐convection reflow oven was modelled using computational fluid dynamic software ( FLUENT 6.3.26 ), whereas structural heating at the board level was conducted using finite‐element method software ( ABAQUS 6.9 ). Findings The simulation showed a complex flow pattern having characteristics of a free‐jet region, stagnation‐flow region, wall jet‐region, recirculation region and vortices. A sharp maximum heat‐transfer coefficient was detected in the stagnation region of the jet, resulting in a spatial variation of local heat transfer on a thermal profile board (TPB). This coefficient affected the temperature distribution in the TPB with different specific heat capacitances and thermal conductivity of the structure. The simulation results were in good agreement with the experimental data and analytical model. The cold region and temperature uniformity (ΔT) increased with increasing complexity of the TPB. The cold region can occur in two possible locations in the TPB. Both occurrences can be related to the flow field of the reflow oven. ΔT of the TPB decreased when the conveyor speed (v) was reduced. A suitable conveyor speed (1.0 cm/s) was determined to maintain ΔT below 10°C, which prevented the thermally critical package from overheating. Practical implications The paper provies a methodology for designing a thermal profile for reflow soldering production. Originality/value The findings provide fundamental guidelines to the thermal‐coupling method at the board and package levels, very useful for accurate control of ΔT at the board and package levels, one of the major requirements in achieving a high degree of reliability for electronic assemblies.

Modeling the Thermal Behavior of Solder Paste Inside Reflow Ovens

Temperature Modeling of Reflow Soldering Based on the Heat Transfer Mechanisms

Overview of Different Approaches in Numerical Modelling of Reflow Soldering Applications

Mechanical Properties and Parameter Determination of Anand Viscoplastic Constitutive Model for Pb-free Solder Alloys

Effects of the Solder Phase Transformation on the Optimization of Reflow Soldering Parameters and Temperature Profiles

Reflow of Lead-Free Solder by Microwave Heating

CFD modelling of the flow field inside a reflow oven

J031041 Effect of Flux on the Microwave Reflow of Lead-Free Solder

A Mechanistic Model for Solder Joint Failure Prediction Under Thermal Cycling

Research on Temperature Change of Reflow Furnace Based On Mathematical Modeling

Computational model of soldered details heating with considering the magnetic field distribution

Integrated Approach to Obtain Gas Flow Velocity in Convection Reflow Soldering Oven

Computerized Simulation and Experimental Investigation of Laser Soldering of PECT: Modeling and Verification

The preparation and wettability of the Sn-9Zn-2.5Bi-1.5In solder paste for SMT process and high shear ball performance

Measurements and Modelling of Thermally Induced Warpages of DIMM Socket Server PCB Assembly after Solder Reflow Processes

Three‐dimensional thermal investigations at board level in a reflow oven using thermal‐coupling method

CFD Investigation of the Soldering Process for a Small Spherical PCM Made of Lead-tin Alloy

Determination of Smarter Reflow Profile to Achieve a Uniform Temperature Throughout a Board

Studies of the Thermal Conductivity and Thermal Resistance of Solder Layers with Lead-Free Pastes by the Photodeflection Method

Temperature Curve of Reflow Furnace Based on Newton's Law of Cooling