The Fenton catalyst prepared via ZSM-5/MOR composite molecular sieve supported Fe/La duplex metal and its dye degradation performance

Zheng, Shuqin
DOI: https://doi.org/10.1007/s11164-024-05303-8
IF: 3.134
2024-06-09
Research on Chemical Intermediates
Abstract:In-situ crystallization was used to prepare the composite molecular sieve ZSM-5/MOR (Z/M) successfully, and FeLa-ZSM-5/MOR (FeLa-Z/M) was obtained by loading Fe and La on the surface of the composite molecular sieve by hydrothermal method. The composite molecular sieve combined the water absorption of mordenite (MOR) and the mass transfer performance of ZSM-5, and effectively improved the surface area and porous structure. This zeolite improved the dispersion performance of active sites in Z/M and reduced mutual aggregation between particles, which was conducive to catalytic efficiency. The addition of La increases the number of oxygen vacancies, according to XRD, TEM, XPS, UV-DRS, and other data analyses. Because doping of La stretched the Fe–O bond, reduced the oxygen vacancies' formation energy, and promoted oxygen vacancies' formation, which was an essential reason for Fe 3+ reduction and Fe 3 O 4 formation. The addition of La also had a highly dispersed effect on Fe. Under the optimal conditions, with a FeLa mass ratio of 1:1, FeLa-Z/M at 25 mg, H 2 O 2 at 0.5 ml, and a pH of 3, the degradation rate of IC was found to be 97.8% and 99.5% in 5 min and 10 min respectively. Analysis of the reaction indicated that the catalyst followed a first-order reaction kinetic. Free radical quenching experiments confirmed that the main free radicals in the FeLa-Z/M Fenton-like system were hydroxyl radicals (·OH), suggesting a possible catalytic mechanism. Furthermore, the synthesized FeLa-Z/M catalyst exhibited superior performance compared to other methods of IC removal, demonstrating high reusability and efficient degradation even after multiple uses.
chemistry, multidisciplinary
What problem does this paper attempt to address?