Abstract:Partial nitritation is necessary for the implementation of the mainstream anammox (anaerobic ammonium oxidation) process in wastewater treatment plants. However, the difficulty in outcompeting nitrite-oxidizing bacteria (NOB) at mainstream conditions hinders the performance of partial nitritation. The present work aimed to develop a high-rate partial nitritation process for low-ammonium wastewater treatment at low temperatures by seeding aerobic granules. Experimental results suggested that both stratified structure of nitrifiers developed in the granules and sufficient residual ammonium concentration (18–35 mg N L−1) in the bulk liquid contributed to efficient NOB repression. With the hydraulic retention time progressively shortened from 1.0 to 0.17 h, the influent nitrogen loading rate of the partial nitritation process reached 6.8 ± 0.4 kg N m−3 d−1 even at 10–15 °C. The high concentration (7.5 gVSS L−1) and activity (0.48 g N g−1 VSS d−1 at 11 °C) of granular sludge made the reactor possess an overcapacity evaluated by the ratio between the actual ammonium oxidation rate of the granules and their maximum potential. The overcapacity helped the reactor to face the adverse effect of decreasing temperatures. Overall, this work indicated the great potential of applying aerobic granules to achieve high-rate partial nitritation at mainstream conditions. Moreover, anammox bacteria with a relative abundance of 2.8% was also identified in the partial nitritation granules at the end of this study, suggesting that the granules provided a habitable niche for anammox bacteria growth. Note that these results cannot fully relate to the treatment of real domestic/municipal wastewater, they are a source of important information increasing the knowledge about low temperature partial nitrification.Graphical abstract

Architecture of HAP-anammox granules contributed to high capacity and robustness of nitrogen removal under 7°C

Performance of anammox UASB reactor treating low strength wastewater under moderate and low temperatures

Synergistic Microbial Communities and Eps Analysis with High Efficiency Nitrogen Removal at Low Temperatures During Start-Up and Operation of Anammox Process

Inorganic carbon (IC) as a key factor affecting the performance of anammox-hydroxyapatite (HAP) process at extremely low temperature (7 °C)

Nitrogen removal performance using anaerobic ammonium oxidation at low temperatures

Key factors improving the stability and the loading capacity of nitrogen removal in a hydroxyapatite (HAP)-enhanced one-stage partial nitritation/anammox process

Realizing stable operation of anaerobic ammonia oxidation at low temperatures treating low strength synthetic wastewater

Mainstream nitrogen removal from low temperature and low ammonium strength municipal wastewater using hydrogel-encapsulated comammox and anammox

Granulation and Characteristics of Extracellular Polymers of Anammox Sludge in High-Load EGSB Reactor

Performance of High-Loaded Anammox Uasb Reactors Containing Granular Sludge

Removal of nitrogen from wastewaters by anaerobic ammonium oxidation (ANAMMOX) using granules in upflow reactors

Deep Purification of Low-Strength Ammonium-Containing Wastewater with ANRE Process

Nitrogen removal by a Hydroxyapatite-enhanced Micro-granule type One-stage partial Nitritation/anammox process following anaerobic membrane bioreactor treating municipal wastewater

Anaerobic ammonium oxidation (anammox) under realistic seasonal temperature variations: Characteristics of biogranules and process performance

High nitrogen removal performance at moderately low temperature utilizing anaerobic ammonium oxidation reactions

Effect of the form of granular sludge and temperature on anammox immobilized fillers: From performance to microbial community analysis

Rapid proliferation of anaerobic ammonium oxidizing bacteria using anammox-hydroxyapatite technology in a pilot-scale expanded granular sludge bed reactor

Stable nitrogen removal by anammox process after rapid temperature drops: Insights from metagenomics and metaproteomics

Temperature-resilient superior performances by coupling partial nitritation/anammox and iron-based denitrification with granular formation

Achieving high-rate partial nitritation with aerobic granular sludge at low temperatures