Abstract:<div><div>Understanding the aerodynamic impact of swept-wing ice accretions is a crucial component of the design of modern aircraft. Computer-simulation tools are commonly used to approximate ice shapes, so the necessary level of detail or fidelity of those simulated ice shapes must be understood relative to high-fidelity representations of the ice. Previous tests were performed in the NASA Icing Research Tunnel to acquire high-fidelity ice shapes. From this database, full-span artificial ice shapes were designed and manufactured for both an 8.9%-scale and 13.3%-scale semispan wing model of the CRM65 which has been established as the full-scale baseline for this swept-wing project. These models were tested in the Walter H. Beech wind tunnel at Wichita State University and at the ONERA F1 facility, respectively. The data collected in the Wichita St. University wind tunnel provided a low-Reynolds number baseline study while the pressurized F1 facility produced data over a wide range of Reynolds and Mach numbers with the highest Reynolds number studied being approximately <i>Re</i> = 11.9×10<sup>6</sup>. Past work focused on only three different fidelity variations for ice shapes based on multiple icing conditions. This work presents a more detailed investigation into several fidelity representations of a single highly three-dimensional scallop ice accretion. Sensitivity to roughness size and application technique on a low-fidelity smooth ice shape is described. The data indicate that the aerodynamic performance is not especially sensitive to the grit variations. An ice accretion code was also used to generate ice shapes for aerodynamic testing and comparisons. These ice shapes have a general appearance like the low-fidelity smooth ice shapes, but in this case, the computer-generated ice shape is significantly smaller. As such, the impact of that ice shape on the aerodynamic performance of the wing is reduced compared to the smooth ice shape based on the icing experiment for those same conditions. Spanwise discontinuities were also introduced to a low-fidelity ice shape in an attempt to quantify the impact of those variation in the high-fidelity ice shape. While the lift data indicate good agreement between the high-fidelity ice shapes and the low-fidelity ice shapes with spanwise discontinuities, a closer investigation of the data suggests potential, significant differences in the flowfield. These results were similar at both facilities over the wide range of test conditions utilized.</div></div>

Scallop ice shape characteristics of swept wing based on large-scale icing wind tunnel experiment

Wind Tunnel Test and Numerical Computation on Ice Accretion on Blade Airfoil for Straight-bladed VAWT

Experimental Aerodynamic Simulation of a Scallop Ice Accretion on a Swept Wing

Effects of Surface Roughness on Splashing Characteristics of Large Droplets with Digital Inline Holographic Imaging

Experimental study on time-resolved 3D ice accretion shape measurements in large-scale icing wind tunnel

Numerical Study of the Effects of Discontinuous Ice on Three-Dimensional Wings

An Investigation on the Characteristics of Supercooled Large Droplet Icing Accretions and Aerodynamic Effects on HighLift Configuration

Large-eddy simulations of the NACA23012 airfoil with laser-scanned ice shapes

The Characteristics of SLD Icing Accretions and Aerodynamic Effects on High-Lift Configurations

Effect of Icing on Airfoil with Control Surface and Analysis of Aerodynamic Parameters

Numerical Investigation of the Unsteady Flow Past an Iced Multi-Element Airfoil

Numerical Study of Iced Airfoils with Horn Features Using Large-Eddy Simulation

Effects of simplified horn ice shapes on flow structures around an airfoil

A Spongy Icing Model for Aircraft Icing

Experimental Research on the Similarity of Rime Icing on a Cylinder Rotating around Its Horizontal Axis

Supercooled large droplet size distribution effects on airfoil icing: A numerical investigation based on a new coupled Eulerian method

An experimental study of icing distribution on a symmetrical airfoil for wind turbine blade in the offshore environmental condition

Supercooled large droplet icing accretion and its unsteady aerodynamic characteristics on high-lift devices

Improving aircraft aerodynamic performance with bionic wing obtained by ice shape modulation

Numerical Simulation of Iced Wing Using Separating Shear Layer Fixed Turbulence Models

Numerical simulation of icing effect on aerodynamic characteristics of a wind turbine blade