Abstract:Purpose: Computational fluid dynamics (CFD) and 4D-flow magnetic resonance imaging (MRI) are synergically used for the simulation and the analysis of the flow in a patient-specific geometry of a healthy thoracic aorta. Methods: CFD simulations are carried out through the open-source code SimVascular. The MRI data are used, first, to provide patient-specific boundary conditions. In particular, the experimentally acquired flow rate waveform is imposed at the inlet, while at the outlets the RCR parameters of the Windkessel model are tuned in order to match the experimentally measured fractions of flow rate exiting each domain outlet during an entire cardiac cycle. Then, the MRI data are used to validate the results of the hemodynamic simulations. As expected, with a rigid-wall model the computed flow rate waveforms at the outlets do not show the time lag respect to the inlet waveform conversely found in MRI data. We therefore evaluate the effect of wall compliance by using a linear elastic model with homogeneous and isotropic properties and changing the value of the Young's modulus. A stochastic analysis based on the polynomial chaos approach is adopted, which allows continuous response surfaces to be obtained in the parameter space starting from a few deterministic simulations. Results: The flow rate waveform can be accurately reproduced by the compliant simulations in the ascending aorta; on the other hand, in the aortic arch and in the descending aorta, the experimental time delay can be matched with low values of the Young's modulus, close to the average value estimated from experiments. However, by decreasing the Young's modulus the underestimation of the peak flow rate becomes more significant. As for the velocity maps, we found a generally good qualitative agreement of simulations with MRI data. The main difference is that the simulations overestimate the extent of reverse flow regions or predict reverse flow when it is absent in the experimental data. Finally, a significant sensitivity to wall compliance of instantaneous shear stresses during large part of the cardiac cycle period is observed; the variability of the time-averaged wall shear stresses remains however very low. Conclusions: In summary, a successful integration of hemodynamic simulations and of MRI data for a patient-specific simulation has been shown. The wall compliance seems to have a significant impact on the numerical predictions; a larger wall elasticity generally improves the agreement with experimental data.

A Systematic Comparison of Normal Structure and Function of the Greater Thoracic Vessels

Biomechanical characterization of murine pulmonary arteries

Building foundations for transcatheter intervascular anastomoses: 3D anatomy of the great vessels in large experimental animals

An Investigation of How Specimen Dimensions Affect Biaxial Mechanical Characterizations with Cellscale BioTester and Constitutive Modeling of Porcine Tricuspid Valve Leaflets

GEOMETRICAL MORPHOLOGY AND MICROSTRUCTURE OF THE HUMAN AORTIC ARCH

Flow velocity is relatively uniform in the coronary sinusal venous tree: structure-function relation.

A computational study of aortic reconstruction in single ventricle patients

Comparison of 10 murine models reveals a distinct biomechanical phenotype in thoracic aortic aneurysms

Evaluation of Bi-ventricular Coronary Flow Patterns Using High-Frequency Ultrasound in Mice with Transverse Aortic Constriction

Biomechanical Phenotyping of Central Arteries in Health and Disease: Advantages of and Methods for Murine Models

Investigation of pulsatile flowfield in healthy thoracic aorta models

Functional mechanical behavior of the murine pulmonary heart valve

Impact of Cardiac Cycle on Thoracic Aortic Geometry-Morphometric Analysis of Ecg Gated Computed Tomography

Biomechanical Characterization of Normal and Pathological Human Ascending Aortic Tissues Via Biaxial Testing Experiment, Constitutive Modeling and Finite Element Analysis

A morphometric study of the structural characteristics of the aorta in pigs using an image analysis method

Comparison of Biomechanical and Microstructural Properties of Aortic Graft Materials in Aortic Repair Surgeries

Validation of Numerical Simulations of Thoracic Aorta Hemodynamics: Comparison with In Vivo Measurements and Stochastic Sensitivity Analysis

On the shape and structure of the murine pulmonary heart valve

Methods in Mechanical Testing of Arterial Tissue: A Review

Layer-specific Biomechanical and Histological Properties of Normal and Dissected Human Ascending Aortas

Right ventricular myocardial mechanics: Multi-modal deformation, microstructure, modeling, and comparison to the left ventricle