Abstract:This paper proposes a nonlinear flux linkage observer for the PMSM speed controls without motion sensors, introducing the deviation among the real stator flux linkage and an estimated stator flux linkage to suppress feedback and integral flux drift. In the position detection of an interior PMSM without a speed sensor, the traditional back EMF integration method uses a pure integrator, or LPF, to estimate the stator flux. Its inherent defects inevitably lead to inaccurate flux estimation, which directly affects the estimation of the motor mover position, resulting in the decline in motor control operation and the distortion of phase current. This paper uses an improved integrator with adaptive compensation. The projected value of the stator flux linkage has been derived from the estimated value of the rotor permanent magnetic flux linkage position angle and the algebraic model (m-model) of the stator flux linkage, along with a synchronous coordinate system. The IPMSM stator coil flux linkage obtained from the stator coil current and integral voltage models in the static coordinate system is compared to form a feedback closed-loop to suppress the integral drift, and using the cross-product approach of the actual and estimated flux linkage yields the projected value of the IPMSM rotor speed and position through a PLL. Compared with the existing motion-sensorless observers, the methodology proposed in this article is simple and exhibits better dynamic and static estimation performance. Extensive and comprehensive MATLAB computer simulation and experimental findings validate the proposed motion-sensorless control mechanism.

Flux Linkage Observation Using an Improved MRAS Observer in Case of Uniform Demagnetization of IPMSM

Adaptive Robust Sensorless Control for PMSM Based on Improved Back EMF Observer and Extended State Observer

An improved adaptive sliding mode observer for sensorless control of PMSM

Adaptive Sliding Mode Observer for Speed-Sensorless Control of PMSM

Sensorless IPMSM Control Based on an Extended Nonlinear Observer with Rotational Inertia Adjustment and Equivalent Flux Error Compensation

Nonlinear Flux Observer for Sensorless Control of IPMSM Based on a Novel Regression Model

Nonlinear Flux Linkage Observer with Model Reference Adaptive System for Improved Permanent Magnet Synchronous Motor Control

Research on Sensorless Control Method of PMSM Based on an Adaptive Sliding Mode Observer

An Improved Speed-Senorless Flux Observer Based on Voltage Model for Synchronous Reluctance Machines

Uniform Demagnetization Diagnosis for Permanent-Magnet Synchronous Linear Motor Using a Sliding-Mode Velocity Controller and an ALN-MRAS Flux Observer

A Novel Terminal Sliding Mode Variable Structure Model Reference Adaptive System Observer for Permanent Magnet Synchronous Motors

An EMF Observer for PMSM Sensorless Drives Adaptive to Stator Resistance and Rotor Flux Linkage

Improved flux linkage observer for position estimation of permanent magnet synchronous linear motor

Rotor Speed and Position Estimation Analysis of Interior PMSM Machines in Low and Medium-High Speed Regions Adopting an Improved Flux Observer for Electric Vehicle Applications

Sensorless Control with Resistance Variation Approach Based on Parallel MRAS and Second-Order Sliding Mode Observer

Sensorless Control of Ipmsm Using Rotor Flux Observer

Sensorless Control of Permanent Magnet Synchronous Motor Based on Improved Model Reference Adaptive System

Hybrid Position Observer of IPMSM with Online Rotor Flux Identification

Adaptive Second-Order Active-Flux Observer for Sensorless Control of PMSMs with MRAS-Based VSI Non-linearity Compensation

Second-sliding mode adaptive active flux control for Interior Permanent Magnet Synchronous Motor

Normal-Operation-Undisturbed Magnet Flux Linkage Monitoring in PMSM Drives via a Mechanical-Model-Based Dual Time-Scale Approach