Abstract:A porous composite of Si@rGO@C‐SD‐AlO has been fabricated by using a precursor induced assembly strategy and combined with the spray drying and an atomic layer deposition process. Protonated chitosan plays the dual roles of inducer for the assembly of graphene oxide sheets and the precursor for amorphous carbon. The composite can be used as a high‐performance anode for lithium‐ion batteries and it shows superior electrochemical performance, for example, excellent multiplicative performance (806 mAh g−1 at 5000 mA g−1), preferable initial Coulomb efficiency (up to 76.7%), high reversible capacity (1477 mAh g−1 after 500 cycles at 500 mA g−1), and excellent long‐cycle cycling stability (930 mAh g−1 after 1000 cycles at 1000 mA g−1). The theoretical capacity of pristine silicon as anodes for lithium‐ion batteries (LIBs) can reach up to 4200 mAh g−1, however, the low electrical conductivity and the huge volume expansion limit their practical application. To address this challenge, a precursor strategy has been explored to induce the curling of graphene oxide (GO) flakes and the enclosing of Si nanoparticles by selecting protonated chitosan as both assembly inducer and carbon precursor. The Si nanoparticles are dispersed first in a slurry of GO by ball milling, then the resulting dispersion is dried by a spray drying process to achieve instantaneous solution evaporation and compact encapsulation of silicon particles with GO. An Al2O3 layer is constructed on the surface of Si@rGO@C‐SD composites by the atomic layer deposition method to modify the solid electrolyte interface. This strategy enhances obviously the electrochemical performance of the Si as anode for LIBs, including excellent long‐cycle stability of 930 mAh g−1 after 1000 cycles at 1000 mA g−1, satisfied initial Coulomb efficiency of 76.7%, and high rate ability of 806 mAh g−1 at 5000 mA g−1. This work shows a potential solution to the shortcomings of Si‐based anodes and provides meaningful insights for constructing high‐energy anodes for LIBs.

Large-scale production of graphene encapsulated silicon nanospheres as flexible anodes for lithium ion batteries

In Situ Wrapping Si Nanoparticles with 2D Carbon Nanosheets As High-Areal-Capacity Anode for Lithium-Ion Batteries.

Ultra-thick Porous Films of Graphene-Encapsulated Silicon Nanoparticles As Flexible Anodes for Lithium Ion Batteries

Scalable Preparation of Porous Silicon Nanoparticles and Their Application for Lithium-Ion Battery Anodes

A Flexible Freestanding Si/rGO Hybrid Film Anode for Stable Li-ion Batteries

High Rate Capability and Long Cycling Life of Graphene-Coated Silicon Composite Anodes for Lithium Ion Batteries

Free-Standing Graphene-Encapsulated Silicon Nanoparticle Aerogel As an Anode for Lithium Ion Batteries

Simultaneous Encapsulation of Nano-Si in Redox Assembled rGO Film as Binder-Free Anode for Flexible/Bendable Lithium-Ion Batteries

High-yield Fabrication of Graphene-Wrapped Silicon Nanoparticles for Self-Support and Binder-Free Anodes of Lithium-Ion Batteries

Adaptable silicon-carbon nanocables sandwiched between reduced graphene oxide sheets as lithium ion battery anodes

Two-dimensional Sandwich-Like Ag Coated Silicon-Graphene-silicon Nanostructures for Superior Lithium Storage

Ultrathin Si Nanosheets Dispersed in Graphene Matrix Enable Stable Interface and High Rate Capability of Anode for Lithium-ion Batteries

Precursor Induced Assembly of Si Nanoparticles Encapsulated in Graphene/Carbon Matrices and the Influence of Al2O3 Coating on their Properties as Anode for Lithium‐Ion Batteries

Encapsulating Si Particles in Multiple Carbon Shells with Pore-Rich for Constructing Free-Standing Anodes of Lithium Storage

In-situ synthesis of graphene nanosheets encapsulated silicon nanospheres by thermal plasma for ultra-stable lithium storage

Controllable Self-Assembly of Micro-Nanostructured Si-Embedded Graphite/Graphene Composite Anode for High-Performance Li-Ion Batteries

A Green-Synthetic Spiderweb-Like Si@Graphene-oxide Anode Material with Multifunctional Citric Acid Binder for High Energy-Density Li-ion Batteries

Self-assembly Silicon/porous Reduced Graphene Oxide Composite Film As a Binder-Free and Flexible Anode for Lithium-Ion Batteries

Three-dimensional Carbon-Coated Si/rGO Nanostructures Anchored by Nickel Foam with Carbon Nanotubes for Li-ion Battery Applications

Flexible Silicon/Titanium Dioxide/Reduced Graphene Oxide Self-Standing Electrode with High Performance and High Stability for Lithium-Ion Batteries

Reduced Graphene Oxide-Encaged Submicron-Silicon Anode Interfacially Stabilized by Al2O3 Nanoparticles for Efficient Lithium-Ion Batteries