Abstract:<p>Three-dimensional (3D) mesostructures with complex ribbon geometries have widespread applications in a diversified range of areas. The mechanically-guided 3D assembly approach based on precisely controlled buckling provides a versatile route to complex 3D ribbon-shaped mesostructures in a broad set of high-performance materials, thereby allowing the development of 3D flexible electronic devices with new functionalities. In many scenarios of practical operations, especially the biointegrated applications, the 3D flexible electronics would inevitably experience the out-of-plane compression, due to loadings of surrounding bones/organs or clothes, which could affect device functions significantly. A clear understanding of the deformation mode of 3D ribbon-shaped mesostructures is thereby essential to the design of 3D flexible electronics. This paper presents a systematic investigation of nonlinear compressive deformations and mode transitions of bridge-shaped and helical mesostructures assembled through controlled lateral buckling. Based on the elastica theory, a finite-deformation model is developed for the bridge-shaped mesostructure compressed by a frictional wall. Validated by results of experiments and finite element analyses (FEA), this theoretical model enables the establishment of the phase diagram of all possible deformation modes, indicating the crucial roles of friction coefficient and in-plane compressive strain on the mode transition. Experimental and computational studies further show that five distinct deformation modes could possibly occur during the compression of helical mesostructures. The mode transitions in the compressed helical mesostructures are found to arise mainly from the downward collapse, either at the middle or the side region of the mesostructure. These results can serve as design guidelines for the development of 3D flexible electronic devices, especially those for biointegrated applications.</p>
What problem does this paper attempt to address?
The problem that this paper attempts to solve is about the nonlinear deformation patterns and their transformation mechanisms of three - dimensional (3D) ribbon - like mesoscale structures under out - of - plane compression. Specifically, the research focuses on bridge - shaped and helical mesoscale structures assembled by controlled lateral buckling. Such structures have broad application prospects in a variety of application scenarios, especially in bio - integration applications, where 3D flexible electronic devices may experience out - of - plane compression due to the loading of surrounding bones/organs or clothing, which may significantly affect the function of the devices. Therefore, a clear understanding of the deformation patterns of these 3D ribbon - like mesoscale structures is crucial for the design of 3D flexible electronic devices.
### Research Background
- **Application Areas**: From biomedical devices to micro - electro - mechanical systems (MEMS), to microrobots and flexible electronic devices, the nonlinear mechanical behavior of curved elastic beams under out - of - plane compression has important practical significance.
- **3D Flexible Electronic Devices**: Through controlled compressive buckling, 3D flexible electronic devices with new functions and unprecedented mechanical/electrical properties can be realized, while having precisely customized 3D geometries.
- **Challenges in Practical Operations**: In many practical operation scenarios, especially in bio - integration applications, 3D flexible electronic devices will inevitably experience out - of - plane compression, which may affect the function of the devices.
### Research Objectives
- **Systematic Research**: This paper systematically studies the nonlinear deformation patterns and their transformation mechanisms of bridge - shaped and helical mesoscale structures under out - of - plane compression.
- **Theoretical Model**: Based on the theory of elasticity, a finite - deformation model is developed to analyze the deformation patterns of bridge - shaped mesoscale structures under friction - wall compression.
- **Experimental Verification**: The validity of the theoretical model is verified through experiments and finite - element analysis (FEA), and the phase diagrams of all possible deformation patterns are established, revealing the crucial roles of the friction coefficient and in - plane compressive strain in pattern transformation.
- **Helical Structures**: Experimental and computational studies show that during the compression of helical mesoscale structures, five different deformation patterns may occur, and the pattern transformation is mainly caused by the downward collapse of the intermediate region or the side regions.
### Main Findings
- **Bridge - shaped Structures**:
- **Line - contact Mode (LC)**: In the initial stage, only the top of the bridge - shaped structure contacts the wall surface, forming a line - contact mode.
- **Surface - contact Mode (FC)**: As the out - of - plane compressive strain increases, the contact area expands, forming a surface - contact mode.
- **Double - line - contact Mode (DLC)**: When the longest flat section reaches a critical length, Euler buckling occurs, causing the surface - contact mode to transform into a higher - order double - line - contact mode.
- **Helical Structures**:
- **Five Deformation Patterns**: Experimental and computational studies show that helical mesoscale structures may exhibit five different deformation patterns during compression.
- **Pattern Transformation**: Pattern transformation is mainly caused by the downward collapse of the intermediate region or the side regions, especially the collapse of the intermediate region is the main driving force.
### Conclusions
- **Design Guidance**: These research results can serve as guidelines for the design of 3D flexible electronic devices, especially in bio - integration applications.
- **Combination of Theory and Experiment**: Through a combination of theoretical models, numerical simulations, and experimental observations, the nonlinear deformation patterns and their transformation mechanisms of 3D ribbon - like mesoscale structures under out - of - plane compression are comprehensively studied.
### Formula Summary
- **Equilibrium Equation**:
\[
\frac{dM}{ds}+F_x\sin\theta - F_z\cos\theta = 0
\]
- **Overall Equilibrium Equation**:
\[
\begin{cases}
F_x - F_I\cos\beta = 0\\
F_z - F_I\sin\beta = 0
\end{cases}
\]
- **Bending Moment**:
\[
M = E I_y\frac{d\theta}{ds}
\]
- **Control Equation**:
\[
\begin{cases}
\frac{d^2\theta}{ds^2}+\frac{F_I}{E I_y}\sin(\theta - \beta)= 0\\
\theta|_