Abstract:Utilizing waste heat to drive thermodynamic systems is imperative for improving energy efficiency, thereby improving sustainability. A combined cooling and power systems (CCP) utilizes heat from a temperature source to deliver both power and cooling. However, CCP systems utilizing LNG cold energy suffers from low second law efficiency due to significant temperature differences. To address this, an "Advanced Power and Cooling with LNG Utilization (ACPLU)" system is proposed, integrating a cascaded transcritical carbon dioxide (TCO2)-LNG cycle with an Organic Rankine cycle (ORC) for improved power generation and an absorption refrigeration system (ARS) for simultaneous cooling. This study evaluates the second law efficiency, net work output, and exergy destruction performance through a sensitivity analysis, optimizing variables such as heat source temperature, superheater temperature difference, ORC and CO2 turbine inlet and condenser pressures, evaporator temperature, and pinch point temperatures of heat exchangers and generator. Compared to previous studies on CCP systems, the ACPLU shows a superior performance, with a second law efficiency of 27.3 % and a net work output of 11.76 MW. Cyclopentane as an ORC working fluid resulted in the highest second law efficiency of 29.06 % and net work output of 12.27 MW. Parametric analysis suggested that heat source temperature significantly impacts net power output. The exergy analysis concluded that a high-pressure ratio and good thermal match between the heat exchangers enhance overall performance. Utilizing artificial neural network (ANN) to produce a multiple-input-multiple-output (MIMO) objective function and performing multi-objective optimization (MOO) using genetic algorithm (GA), an improved second law efficiency and net power output by 28.11 % and 14.16 MW respectively, with pentane as the working fluid, is demonstrated. An average cost rate of 9.121 $/GJ was observed through a thermo-economic analysis. The ACPLU system is promising for medium temperature waste heat recovery, such as, pharmaceutical manufacturing plants.

Sensitivity and sustainability analysis of combined cycle plant with integrated LNG pressure energy recovery

Techno-economic Analysis on a Hybrid System with Carbon Capture and Energy Storage for Liquefied Natural Gas Cold Energy Utilization

Thermodynamic Analysis of an LNG Fuelled Combined Cycle Power Plant with Waste Heat Recovery and Utilization System

Structure and Energy Efficiency Analysis of Combined Research on Liquefied Natural Gas Cold Energy Generation

Enhancing thermodynamic performance with an advanced combined power and refrigeration cycle with dual LNG cold energy utilization

Parametric Analysis of a New CCHP System Utilizing Liquefied Natural Gas (LNG)

Techno-Economic and Environmental Analyses of an Integrated Liquefied Natural Gas/Allam–Fetvedt Cycle/Air Separation Unit Complex

Dynamic Exergy Analysis of a Novel LNG Cold Energy Utilization System Combined with Cold, Heat and Power

Performance Enhancement of Conventional Combined Cycle Power Plant by Inlet Air Cooling, Inter-Cooling and LNG Cold Energy Utilization

Thermodynamic Analysis for LNG Combined Cycle Power Plants

Design and thermo-enviro-economic analyses of a novel thermal design process for a CCHP-desalination application using LNG regasification integrated with a gas turbine power plant

A combined power cycle utilizing low-temperature waste heat and LNG cold energy

Performance analysis and multi-objective optimization for an integrated air separation, power generation, refrigeration and ice thermal storage system based on the LNG cold energy utilization

Enhancing energy efficiency: Design and simulation of air fractionation unit integrated through LNG cold energy and two‐stage organic Rankine cycles

Assessment of a sustainable multigeneration system integrating supercritical CO 2 Brayton cycle and LNG regasification: Thermodynamic and exergoeconomic evaluation

Exergy Analysis of Liquefied Natural Gas Cold Energy Recovering Cycles

A combined energy recovery system for comprehensive utilization of both low-grade waste heat and cold energy in LNG

Design and multi-objective optimization of combined air separation and ORC system for harnessing LNG cold energy considering variable regasification rates

Carbon Neutral Design of Waste Energy Recovery System for LNG Power Plant Using Organic Rankine Cycle

Evaluating and optimizing the cold energy efficiency of power generation and wastewater treatment in LNG-fired power plant based on data-driven approach

The 4E emergy-based analysis of a novel multi-generation geothermal cycle using LNG cold energy recovery