Abstract:High-performance aerogel fibers with high porosity, ultralow density and thermal conductivity, and good flexibility are attractive candidates for the next generation of effective thermal insulation, efficient personal thermal management, and other functional applications. However, most previously reported aerogel fibers suffered from either limited working temperatures, weak mechanical properties, or complex manufacturing processes. In the present work, a facile wet-spinning technique combined with freeze-drying was developed to fabricate strong polyimide aerogel fibers (PAFs) based on organo-soluble polyimide. Attributed to the unique "porous core–dense sheath" morphology, the PAFs exhibited excellent mechanical properties with an optimum tensile strength of 265 MPa and an initial modulus of 7.9 GPa at an ultimate elongation of 65%, representing the highest value for aerogel fibers reported so far. Moreover, the PAFs possess high porosity (>80%) and high specific surface area (464 m<sup>2</sup> g<sup>–1</sup>), which render the woven PAF fabrics with excellent thermal insulation properties within a wide temperature range (−190 to 320 °C) and potential applications for thermal insulation under harsh environments. Additionally, a series of functionalized aerogel fibers or their fabrics based on PAFs, including phase-change fabrics with a thermoregulation function and electromagnetic shielding (EMI) textiles with a high EMI SE value, have been successfully fabricated for expanding their potential applications. Overall, this novel aerogel fiber sheds light on a promising direction for developing the next generation of high-performance thermal insulation and multifunctional fibers and textiles.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c21842?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c21842</a>.Optical images of the prepared PAF and woven textile, cross-sectional SEM images with different magnifications of the PAFs, cross-sectional SEM image of the PI fiber, nitrogen adsorption/desorption isotherms and the pore size distribution of PAFs, small-angle X-ray scattering of PAF measured at different strains, initial cross-sectional morphology and fractured morphology after the tensile test of PAF-5, TGA and DTG curves of PAF with PEG-1000 and stearic acid, and XRD and XPS wide-scan spectra of pristine PAF and AgNP-deposited PAF fibers (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c21842/suppl_file/am0c21842_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

High-strength and high-temperature-resistant multilayer interconnected polyimide paper derived from anisotropic aerogel via a hot-extrusion strategy for aerospace applications

High‐performance composite paper based on heterogeneous polyimide fibers with enhanced mechanical and dielectric properties

Facile Preparation of Continuous and Porous Polyimide Aerogel Fibers for Multifunctional Applications

Aerogel Honeycombs with Orientation-Induced Microstructures for High-Temperature Lightweight Composite Sandwich Structures

Double-Phase-Networking Polyimide Hybrid Aerogel with Exceptional Dimensional Stability for Superior Thermal Protection System

Polyimide Aerogels with Excellent Thermal Insulation, Hydrophobicity, Machinability, and Strength Evolution at Extreme Conditions

Aramid reinforced polyimide aerogel composites with high‐mechanical strength for thermal insulation material

Polyimide-Silica Hybrid Aerogels with High Mechanical Strength for Thermal Insulation Applications

Polyimide-Coating-on-Aramid Nanofiber Strategy Toward Ultralight Organic Aerogels with Multifunctional Properties

High‐strength, electrically insulated industrial meta‐aramid paper reinforced with polyethylene terephthalate microfibre pulp in a sandwich structure

Preparation of polyimide aerogels by freeze‐extraction and chemical imidization for 3D printing

Mechanically strong and thermally insulating polyimide aerogels by homogeneity reinforcement of electrospun nanofibers

Mechanically Robust Nanoporous Polyimide/Silica Aerogels for Thermal Superinsulation of Aircraft

Freezing‐Assisted Direct Ink Writing of Customized Polyimide Aerogels with Controllable Micro‐ and Macro‐ Structures for Thermal Insulation

Mechanically strong and tough polyimide aerogels cross-linked with amine functionalized carbon nanotubes synthesized by fluorine displacement reaction

Preparation and Properties of High-Temperature-Resistant, Lightweight, Flexible Polyimide Foams with Different Diamine Structures

Robust-flexible and highly-thermostable polyimide-silica aerogels with adjustable fiber skeleton structure for efficient aerospace thermal protection

Fabrication and Characterization of a High-Strength Polyimide/Thermoplastic Polyurethane Composite Aerogel with Hydrophobicity and Low Thermal Conductivity

Ultralow shrinkage polyimide hybrid aerogel composite enhanced with organic fibers for thermal protection

Polyimide aerogels with low thermal conductivity and high-temperature stable properties prepared by lyophilization for flexible thermal protection

Double-cross-linking Strategy for Preparing Flexible, Robust, and Multifunctional Polyimide Aerogel