Abstract:The conventional Fenton-like system (Fe(III)/H 2 O 2 ) is severely limited by the inferior activity of Fe(III) on H 2 O 2 activation to produce highly active species and the sluggish regeneration rate of Fe(II). This work significantly enhanced the oxidative breakdown of the target organic contaminant bisphenol A (BPA) by Fe(III)/H 2 O 2 by introducing cheap CuS at a low dose of 50 mg/L. The BPA removal (20 mg/L) in CuS/Fe(III)/H 2 O 2 system reached 89.5% within 30 min under the optimal conditions: CuS dosage 50 mg/L, Fe(III) concentration 0.05 mM, H 2 O 2 concentration 0.5 mM and pH 5.6. Compared to CuS/H 2 O 2 and Fe(III)/H 2 O 2 systems, the reaction constants had a 47- and 12.3-fold enhancement, respectively. Even compared with the conventional Fe(II)/H 2 O 2 system, the kinetic constant also increased more than twice, further confirming the distinctive superiority of constructed system. Element species change analyses showed that Fe(III) in solution was adsorbed onto the CuS surface, and then Fe(III) was rapidly reduced by Cu(I) in the CuS lattice. Combining CuS and Fe(III) (in-situ formed CuS-Fe(III) composite) created a robust co-effect on the activation of H 2 O 2 . Also, S(-II) and its derivatives, e.g., S n 2- and S 0 (as an electron donor), could quickly reduce Cu(II) to Cu(I) and ultimately oxidize to the harmless product SO 4 2- . Notably, a mere 50 μM of Fe(III) was sufficient to maintain enough regenerated Fe(II) to effectively activate H 2 O 2 in CuS/Fe(III)/H 2 O 2 system. In addition, such a system achieved a broad range of pH applications and was more suitable for real wastewater containing anions and natural organic matter. Scavenging tests, electron paramagnetic resonance (EPR), and probes further verified the critical role of •OH. This work provides a new approach to solving the problems of Fenton systems through a solid-liquid-interfacial system design and exhibits considerable application potential in wastewater decontamination.

Enhanced removal of Sb(III) and Sb(V) using biosynthesized iron sulfide nanoparticles: Identification of biomolecules in the capping layer and its functions

Enhanced adsorption for trivalent antimony by nano-zero-valent iron-loaded biochar: performance, mechanism, and sustainability

Enhanced Performance for Hg(II) Removal Using Biomaterial (cmc/gelatin/starch) Stabilized FeS Nanoparticles: Stabilization Effects and Removal Mechanism

Mechanisms and Valorization of Selective Adsorption of Sb(III) by Amino-Functionalized Lignin-Based Porous Biochar

Removal of Sb(V) from Aqueous Solutions Using Fe-Mn Binary Oxides: the Influence of Iron Oxides Forms and the Role of Manganese Oxides

Modification of iron sulfide nanoparticles by hyaluronate: Enhanced stability, transport, and reactivity

Fast and efficient remediation of antimony-contaminated surface water and field soil using alumina supported Fe-Mn binary oxide

Efficient removal of Sb(V) from water using sulphidated ferrihydrite via tripuhyite (FeSbO4) precipitation and complexation

Efficient removal of antimony by a facile liquid-controlled strategy reinforced hematite-spinel (Fe2O3-MnFe2O4) composite: construction, simulation and practical evaluation

Enhanced adsorption of antimonate by ball-milled microscale zero valent iron/pyrite composite: adsorption properties and mechanism insight

Coupled Antimony(Iii) Sorption and Oxidation by Iron-Modified Biochar: Examining the Balance Between Electron Donating Capacity and Reactive Fe Species

Insight into different removal behaviors and mechanism of heavy metals via sulfate-loaded layered double oxide

Efficient Removal of Organic Contaminants in CuS-Mediated Solid-Liquid-Interfacial Fenton-Like System: Role of Bimetallic Cycle and Sulfur Species

The Mechanism of Antimony(iii) Removal and Its Reactions on the Surfaces of Fe–Mn Binary Oxide

Facile preparation of novel magnetic mesoporous Fe Mn binary oxides from Mn encapsulated carboxymethyl cellulose-Fe(III) hydrogel for antimony removal from water

Nanoscale Iron (Oxyhydr)oxide-Modified Carbon Nanotube Filter for Rapid and Effective Sb(iii) Removal

Advancing Antimony(III) Adsorption: Impact of Varied Manganese Oxide Modifications on Iron–Graphene Oxide–Chitosan Composites

Enhancing The Removal Of Sb (Iii) From Water: A Fe3o4@Hco Composite Adsorbent Caged In Sodium Alginate Microbeads

Sulfide enhances the Fe(II)/Fe(III) cycle in Fe(III)-peroxymonosulfate system for rapid removal of organic contaminants: Treatment efficiency, kinetics and mechanism

Microwell Confined Iron Oxide Nanoparticles in the Honeycomb-like Carbon Spheres for the Adsorption of Sb (III) and Sequential Utilization as a Catalyst

Enhanced Sb(V) removal of sulfate-rich wastewater by anaerobic granular sludge assisted with Fe/C amendment