Abstract:Many subsea structures have non-uniform geometries, which extend only a finite distance above the seabed. To better understand local scour at these structures, this paper presents scour measurements from an experimental study of submerged compound piles comprised of a circular superstructure supported by a circular foundation. The experiments were conducted in the clear-water regime and considered the effect of three different ratios describing the structural geometry: (i) the overall height of the compound structure above the initial bed level to the diameter of the super-structure <math>h1/D1</math>; (ii) the height of the foundation exposed above the initial bed level relative to the overall height of the superstructure <math>h2/h1</math>; and (iii) the diameter of the foundation to that of the superstructure <math>D2/D1</math>. In all cases <math>D2≥D1</math> and <math>h1≥h2≥0</math> (i.e. the foundation and superstructure where never buried). The experimental results indicate that, if all other parameters are held constant, the non-dimensional equilibrium scour depth <math>S0/D2</math> increases with both <math>h1/D1</math> and <math>h2/h1</math>, and decreases as <math>D2/D1</math> increases. To quantitatively explain these trends the experimental results are compared with a range of existing methods to predict scour depth for non-uniform (or complex) surface piercing piles. Of these methods it is found that an effective pile height and an effective pile diameter, computed using simple geometric arguments, give good agreement. The concept of effective height is also shown to collapse time-scale measurements of the scour process convincingly across the full range of experimental results and to explain the extent and shape of the local scour hole reasonably well. Collectively, these findings suggest that the calculation of an effective height may be used to provide a reasonable first approximation to estimate the rate and extent of local scour around submerged compound structures.

Numerical study of the flow at a vertical pile with net-like scour protection matt

Scour characteristics at the periphery of a vertical pile under steady flow

3D Numerical Modeling of Flow and Scour Around a Circular Pile

Investigation of local scour around two vertical piles by using numerical method

Numerical Investigation of Local Scour Protection around the Foundation of an Offshore Wind Turbine

Experimental Study on Local Scour Depth Around Pile Groups

Time Development of Scour Around Pile Groups in Tidal Currents

An Innovative Eco-friendly Method for Scour Protection around Monopile Foundation

Experimental study of local scour around submerged compound piles in steady current

Numerical Study on the Effect of Edge Scouring on Stability of Soft Mattress in the Yangtze Estuary

Countermeasure of Local Scour around Offshore Wind Power Piles

Numerical investigation of the scour around a diamond- and square-shaped pile in a narrow channel

New Formula for Scour Depth at Piles Based on Energy Equilibrium

Scour Effects On The Lateral Behavior Of A Large-Diameter Monopile In Soft Clay: Role Of Stress History

Experimental and Numerical Study of the Tidal Bore Impact on a Newly-Developed Sheet-Pile Groin in Qiantang River

Experiment investigation on the local scour around circular and square piles in open wharf

Effect of a skirted mudmat foundation on local scour around a submerged structure

An Experimental Study on Pile Scour Mitigating Measures under Waves and Currents

An Experimental Study Of Scour Countermeasures For Offshore Piles In Marine Environment

Microscopic investigation of shape effect on local scour around the monopile using CFD-DEM

Experimental Investigation on Scour Development and Scour Protection for Offshore Converter Platform