Abstract:In the current research, strong strain-hardening capability in 1045 carbon steel was achieved by cold rolling and heat treatment of the lamellar structure. After 60% cold rolling, the proeutectoid ferrite and pearlite were severely elongated along the rolling direction. Cementite layers with brittle nature were fragmented under the action of stress and also by shear band formation during rolling. The lamellar heterogeneous microstructure of the heat-treated samples was formed by the proeutectoid ferrite as the soft domain and the pearlite as the hard domain. Increasing the heat treatment duration promoted the spheroidization transformation of cementite, and the spheroidization degree of cementite increased. With the increase in the time of heat treatment, the number of recrystallized grains is increased. Heat treatment led to weakening the deformation texture (⟨100⟩‖ND or θ fiber) and strengthening the recrystallization texture (⟨110⟩‖ND or ζ fiber). The heat-treated steels revealed an average microhardness value much higher than its macrohardness due to changes in the texture of ferrite grains. Heat treatment decreased the strength and hardness, and increased the ductility and toughness of steel compared to the cold-rolled sample owing to the annihilation of dislocations and the strengthening transition from strain hardening to grain refinement. The heat-treated samples exhibited a wider range of uniform plastic deformation and a larger strain hardening rate than the cold-rolled sample owing to the occurrence of the recovery of strain hardening rate phenomenon. The appropriate collocation of the fine spherical cementite and the soft/hard domains (with a large difference in mechanical properties) was beneficial to obtaining excellent strength-ductility balance in plain medium carbon steel. After heat treatment, the extent of ductile fracture considerably increased. With increasing the time of heat treatment from 1 to 3 h, the number of lamellar dimples decreased owing to the creation of more fine spherical cementite.

Principles of Increasing the Strength and Toughness of Ferritic/Martensitic Steel Produced by Cold Rolling

Microstructural Evolution and Mechanical Properties of 6cr13 Martensitic Stainless Steel Subjected to Cold Rolling and Heat Treatments

The Influence of Warm Rolling Reduction on Microstructure Evolution, Tensile Deformation Mechanism and Mechanical Properties of an Fe-30Mn-4Si-2Al TRIP/TWIP Steel

Importance of cold rolling and tempering on the microstructure evolution, precipitation behavior and mechanical responses of 9Cr3Co3W1Cu ferritic/martensitic steel

Heterogeneous Multi-Phase Grains Improving the Strength-Ductility Balance in Warm-Rolled Fe-18Mn-3Ti Steel

Influence of warm rolling temperature on multi-scale lamellar structure and mechanical properties of medium carbon steel

Strength‐Ductility Synergy in an Austenitic Stainless Steel Processed by Warm Rolling and Subsequent Cryogenic Treatment

Strong strain-hardening capability in plain carbon steel through cold rolling and heat treatment of lamellar structure

On the Simultaneous Improving of Strength and Elongation in Dual Phase Steels via Cold Rolling

Enhanced mechanical properties of a high-carbon martensite steel processed by heavy warm rolling and tempering

Simultaneous Enhancement of the Strength and Plasticity of Fe12Mn Steel by Modulation of Grain Morphology

Ultrafine Structure and High Strength in Cold-Rolled Martensite

An original way for producing a 2.5 GPa strength ductile steel by rolling of martensite

Simultaneous enhancement of the strength and plasticity of Fe 12Mn steel by modulation of grain morphology

Microstructure, mechanical properties and strengthening mechanism of high strength hot-rolled ferrite-martensite dual phase steel

Development of Very Tough Ferritic Stainless Steels by Optimizing the Recrystallized Microstructure

Preparation and Mechanical Behavior of Ultra-High Strength Low-Carbon Steel

Yielding Behavior and Strengthening Mechanisms of a High Strength Ultrafine‐Grained Cr–Mn–Ni–N Stainless Steel

Tailoring Strength and Ductility of a Cr-Containing High Carbon Steel by Cold-Working and Annealing

Impact of Cold-Rolling and Heat Treatment on Mechanical Properties of Dual-Phase Treated Low Carbon Steel

Microstructure Evolution and Mechanical Properties of Medium Carbon Martensitic Steel during Warm Rolling and Annealing Process