Abstract:Nanofluid injection into oil reservoirs is a novel chemical enhanced oil recovery (EOR) method and has been the subject of many researches in recent years. Despite its increasing applications, there is not enough information on the mechanisms and microscopic aspects of nanoparticle performance in EOR processes. Among nanoparticles, Janus nanoparticles (JNPs), which have two distinct hydrophilic and hydrophobic sides, can play an effective role in oil recovery enhancement applications. In the present study, molecular dynamics (MD) simulations were performed to provide a molecular-scale insight into the working mechanisms of silica Janus nanoparticles in oil recovery enhancement by considering the presence of sodium, chlorine, magnesium and sulfate ions. The calcite surface interacts with the mixture of heptane, decane, and toluene as the oil phase. Based on the simulation results, the mechanism of oil detachment from the calcite surface involves several steps. Due to the electrostatic interactions between the nanofluid and the calcite, the formation of a water channel towards the calcite surface begins, and the nanofluid reaches and spreads over the calcite surface, which is influenced by two factors: hydrogen bonds between water and calcite; the presence of ions in the nanofluid, which can increase the hydrophilicity of the calcite surface. Thus, the oil molecules remain as a droplet on the rock surface. Subsequently, the JNPs approach to the oil–water interface near the calcite surface and push the oil droplet upward so that the oil phase completely detaches from the surface. The presence of ionic compounds around the JNPs increases their electrostatic interactions with each other and also increases the probability agglomeration of JNPs, which is a negative factor. On the other hand, they increase the electrostatic interactions of JNPs with calcite, which is a positive factor. Therefore, it is necessary to choose the optimal concentration of the ionic compounds in the injected nanofluid. According to the simulation results, JNPs could increase the viscosity of the water phase by 60% and reduce the surface tension of water–oil by 33%. Under the reservoir temperature and pressure conditions, the diffusion coefficient of 1nm JNPs has increased from 3.33 × 10 –10 to 6.67 × 10 –10 m 2 /s. The results of this study may be useful for designing favorable conditions for nanofluid injection in the EOR applications.

The Roles of Oil-Water Interfaces in Forming Ultrasmall CaSO 4 Nanoparticles

In Situ Monitoring the Nucleation and Growth of Nanoscale CaCO3 at the Oil-Water Interface

Evolution of oil/water interface in the presence of SDBS detected by dual polarization interferometry

Interfacial Behaviors and Oil Detachment Mechanisms by Modified Silica Nanoparticles: Insights from Molecular Simulations

Formation of Disperse Nanoparticles at the Oil/Water Interface in Normal Microemulsions

Molecular Simulation of Surfactant Displacement of Residual Oil in Nanopores: Formation of Water Channels and Electrostatic Interaction

Ultrasound-Induced Formation of CdS Nanostructures in Oil-in-Water Microemulsions.

Janus Silica Nanoparticles at Three-Phase Interface of Oil–Calcite–Electrolyte Water: Molecular Dynamics Simulation

Molecular dynamics modeling and simulation of silicon dioxide-low salinity water nanofluid for enhanced oil recovery

In-situ liquid SAXS studies on the early stage of calcium carbonate formation

Oil solubilization in sodium dodecylbenzenesulfonate micelles: New insights into surfactant enhanced oil recovery

Molecular dynamics study of nanoparticles and non-ionic surfactant at an oil–water interface

Dynamics and wetting behavior of soft particles at a fluid-fluid interface

Uncovering chemical principles governing nanophase formation in ternary solvents

Investigation of the Mechanism of SiO2 Particle and Capsule Formation at the Oil-Water Interface of Dye-Stabilized Emulsions

Impact of Sodium Dodecyl Benzene Sulfonate Concentration on the Stability of the Crude Oil–Mineral Water Interfacial Film: A Molecular Dynamics Simulation Study

Mechanism of active silica nanofluids based on interface-regulated effect during spontaneous imbibition

Oil Detachment Mechanism in Natural Surfactant Flooding from Silica Surface: Molecular Dynamics Simulation

Enhancement of Oil Transport Through Nanopores Via Cation Exchange in Thin Brine Films at Rock-Oil Interface

Investigation of the interfacial phenomena in the presence of nonionic surfactants and a silica nanoparticle at the n-decane-water interface: Insights from molecular dynamics simulation

Identifying the Mechanisms behind the Stability of Silica Nano- and Micro-Particles: Effects of Particle Size, Electrolyte Concentration and Type of Ionic Species