Abstract:Due to the diversity of carbon nanotubes (CNTs), polymers, and the preparation processes of the composites, CNT-filled polymeric composites present various piezoresistive properties. One puzzling issue is the concurrence of a negative piezoresistive effect and a positive piezoresistive effect in composites with different polymer matrixes. In this paper, we present a microscopic view of the nature of the positive piezoresistive effect and its dependence on the polymer matrix types based on the model in our previous study, in which the piezoresistive behavior was tailored by a parameter-the average junction gap variation (AJGV)-describing the statistical property of the CNT conductive network. The microscopic movement process of CNTs embedded in a polymer matrix was analyzed and then the Poisson's ratio of the polymer matrix was determined as a key factor that is in charge of negative or positive piezoresistive properties. The obstacle effect of polymer chains on the movement of CNTs was also found to be responsible for the positive piezoresistive effect as it affects the AJGV in compressive strain. Based on numerical simulations of CNT network deformation with different Poisson's ratios and minimum junction gaps caused by the obstacle effect, the positive piezoresistive effect was found resulted from the obstacle effect on CNT junction gap variations that exceeds the initial value of the AJGV caused by the CNT network deformation, and only occur under the precondition of the polymer matrixes with a large Poisson's ratio close to 0.5. The conclusions were then verified experimentally using composites with two kinds of polymer matrixes with significantly different Poisson's ratios.

The effect of property contrast in two-component piezoelectric composites

On the effective properties of matrix composites: The role of geometric factors in relation to property contrast

Effective Piezoelectric Coefficients of Cement-Based 2–2 Type Piezoelectric Composites Based on a Multiscale Homogenization Model

Piezotronic Effects In The Extension Of A Composite Fiber Of Piezoelectric Dielectrics And Nonpiezoelectric Semiconductors

Magnetoelectric Effect in Composites of Piezoelectric and Piezomagnetic Phases

Design Optimization of Piezocomposites Using a Homogenization Model: From Analytical Model to Experimentation

Effect of Filling Material Properties on 1–3 Piezoelectric Composite Performance

The Analysis Of Piezoelectric/Piezomagnetic Composite Materials Containing Ellipsoidal Inclusions - Comment

Micromechanical modeling of electromagnetic composite of piezoelectric and piezomagnetic phases

Characterization of the effective electroelastic properties of piezoelectric composite containing spatially oriented inclusions

The electromechanical coupling property and vibration behavior in 1-3 type piezoelectric composites

Effective Moduli of Ellipsoidal Particle Reinforced Piezoelectric Composites with Imperfect Interfaces

Closed-form solutions for piezomagnetic inhomogeneities embedded in a non-piezomagnetic matrix

A Micromechanical Model for Phase-Change Composites

The influence of thermo-electromechanical coupling on the performance of lead-free BNT-PDMS piezoelectric composites

A study of epoxy based polymer composites: Tailoring mechanical and piezoelectric characteristics

Two orientation effects and large anisotropy of parameters in piezo-active 2–1–2 composites based on [0 1 1]-poled crystals

Calculations of the Effective Properties of 1-3 Type Piezoelectric Composites with Various Rod/fibre Orientations

Multiple-scattering Approach to Effective Properties of Piezoelectric Composites.

An Investigation on Piezoresistive Behavior of Carbon Nanotube/Polymer Composites: Ii. Positive Piezoresistive Effect

Effective-Medium Theory of Piezoelectric Composites