Abstract:Phase change materials (PCMs) are materials that can store large amounts of heat during their phase transition from solid to liquid without a significant increase in temperature. While going from liquid to solid this heat is again released. As such, these materials can play an important role in future energy-efficient buildings. If applied in facades as part of a thermal buffer strategy, e.g., capturing and temporarily storing solar energy in so-called Trombe walls, the PCMs are exposed to high solar radiation intensities, which may easily lead to issues of overheating. This paper therefore investigates the melting process of PCM and arrives at potential solutions for countering this overheating phenomenon. This study uses the simulation program Comsol to investigate the heat transfer through, melting of and fluid flow inside a block of PCM (3 × 20 cm2) with a melting temperature of around 25 °C. The density, specific heat and dynamic viscosity of the PCM are modeled as a temperature dependent variable. The latent heat of the PCM is modeled as part of the specific heat. One side of the block of PCM is exposed to a heat flux of 300 W/m2. The simulations show that once part of the PCM has melted convection arises transporting heat from the bottom of the block to its top. As a result, the top heats up faster than the bottom speeding up the melting process there. Furthermore, in high columns of PCM a large temperature gradient may arise due to this phenomenon. Segmenting a large volume of PCM into smaller volumes in height limits this convection thereby reducing the temperature gradient along the height of the block. Moreover, using PCMs with different melting temperature along the height of a block of PCM allows for controlling the speed with which a certain part of the PCM block starts melting. Segmenting the block of PCM using PCMs with different melting temperature along its height was found to give the most promising results for minimizing this overheating effect. Selecting the optimal phase change temperatures however is critical in that case.

Controlling Temporally and Spatially Homogeneous Temperature Distribution of Paper Substrates by Biogenic Phase Change Hybrid Material Coatings

Preparation and Characterization of Fatty Acid Ternary Eutectic Mixture/Nano-Sio 2 Composite Phase Change Material for Building Applications

Phase-Change-Material-Impregnated Wood for Potential Energy-Saving Building Materials

Thermal Comfort and Flame Retardant Performance of Novel Temperature-Control Coatings with Modified Phase Change Material Microcapsules

Thermal and mechanical performance assessment of composite (CPCM) for energy storage

Thermally conductive and form-stable phase change composite for building thermal management

Tailoring Thermal Properties Via Synergistic Effect in a Multifunctional Phase Change Composite Based on Methyl Stearate

Thermal comfort and energy saving of novel heat-storage coatings with microencapsulated PCM and their application

Rapid UV-Curable Form-Stable Polyethylene-Glycol-Based Phase Change Material

A Study on a Novel Phase Change Material Panel Based on Tetradecanol/Lauric Acid/Expanded Perlite/Aluminium Powder for Building Heat Storage

The cores regulation of paraffin-chitosan phase change microcapsules for constant temperature building

Advancing tent thermoregulation: Integrating shape-stabilized PCM into fabric design

Epoxy Resin-Based Gel Phase Change Material for Strong Interface Bonding and Interface Thermal Management

Preparation, Thermal Performance, and Application of Shape-stabilized PCM in Energy Efficient Buildings

Preparation and Thermal Properties of Propyl Palmitate-Based Phase Change Composites with Enhanced Thermal Conductivity for Thermal Energy Storage

A polyurethane solid–solid phase change material for flexible use in thermal management

Capric-stearic acid mixture impregnated carbonized waste sugar beet pulp as leak-resistive composite phase change material with effective thermal conductivity and thermal energy storage performance

Polystyrene Shell-Based "Coconut-Like" and "Pomegranate-Like" Microencapsulated Phase Change Materials: Formation Mechanism, Thermal Conductivity/Stability Enhancement and Their Application in Thermal Management

Temperature Control in (Translucent) Phase Change Materials Applied in Facades: A Numerical Study

Synergistic phase change and heat conduction of low melting-point alloy microparticle additives in expanded graphite shape-stabilized organic phase change materials

Preparation and Heat-Moisture Properties of Phase Change Hygroscopic Materials