Abstract:Lithium–oxygen (Li–O2) batteries, renowned for their exceptionally high theoretical energy density, have garnered significant interest as a prime candidate for future electric device development. However, practical testing often yields unsatisfactory capacity due to the tendency of their solid‐phase discharge products to cover active sites on the electrode surface. Optimizing the growth mechanism of these solid‐phase products and addressing the storage issue to narrow the gap between actual and theoretical capacities stands as the core challenge in Li–O2 battery development. Here, a fluorine‐doped bimetallic cobalt‐nickel oxide (CoNiO2–xFx/CC) with an interlaced catalytic surface (ICS) and an open, corncob‐like structure is proposed as an oxygen electrode. Unlike conventional oxide electrodes with a "single adsorption catalytic mechanism", the ICS of the CoNiO2–xFx/CC electrode offers a compelling "competitive adsorption catalytic mechanism". This is attributed to the diverse selective sites within the ICS, where oxygen sites preferentially facilitate oxygen conversion due to their higher affinity for oxygen, while fluorine sites preferentially contribute to the growth of Li2O2 owing to their stronger affinity for LiO2. This transformation in the formation mechanism of Li2O2 and its morphology from film along the electrode surface to toroidal particles effectively mitigates the issue of buried active sites. Additionally, the unique structure of the CoNiO2–xFx/CC electrode aids in the storage and decomposition of Li2O2 products. Its corncob‐like open architecture not only promotes the capture and release of oxygen but also facilitates the formation of well‐contacted Li2O2/electrode interfaces, akin to a "corn on the cob" design. Consequently, the Li–O2 battery employing the CoNiO2–xFx/CC cathode demonstrates a high specific capacity of up to 30923 mAh g–1 and a lifespan exceeding 580 cycles, surpassing most reported metal oxide‐based cathodes. This work offers a promising solution to the issues of buried active sites and storage of insoluble products in metal‐air batteries. This article is protected by copyright. All rights reserved

Synergistically catalytic regulation of surface chemistry on coal based needle coke by bimetallic interface for enhanced Li/Na storage

Surface engineering of LiNi0.8Mn0.1Co0.1O2 towards boosting lithium storage: Bimetallic oxides versus monometallic oxides

Intergrated morphology engineering and alloying strategy for FeNi@NC Catalysts: Tackling the polysulfide shuttle in Li-S batteries

Constructing An Interlaced Catalytic Surface Via Fluorine‐doped Bimetallic Oxides for Oxygen Electrode Processes in Li–O2 Batteries

Regulating surface electron structure of PtNi nanoalloy via boron doping for high‐current‐density Li‐O2 batteries with low overpotential and long‐life cyclability

N, S co-doped hollow carbon nanocages confined Fe, Co bimetallic sites for bifunctional oxygen electrocatalysis

Carbon nanotubes with CoNi alloy nanoparticles growing on porous carbon substrate as cathode for Li-CO 2 batteries

Synergistic Engineering of CoO/MnO Heterostructures Integrated with Nitrogen-Doped Carbon Nanofibers for Lithium-Ion Batteries

Synergistic Effect of B-Nb Co-modified to Achieve Crystal Structure and Interface Tuning for Ni-rich Cathode

Intermetallic-driven highly reversible electrocatalysis in Li–CO2 battery over nanoporous Ni3Al/Ni heterostructure

Surface-targeted functionalization of nickel-rich cathodes through synergistic slurry additive approach with multi-level impact using minimal quantity

A N-Rich porous carbon nanocube anchored with Co/Fe dual atoms: an efficient bifunctional catalytic host for Li–S batteries

Revealing the unique process of alloying reaction in Ni-Co-Sb/C nanosphere anode for high-performance lithium storage

Synergistic effect of Co3O4/Fe2O3 nanoparticles encapsulated with MOFs-derived nitrogen-doped porous carbon for high-performance lithium-ion battery

FeCoNi Ternary Nano-Alloys Embedded in a Nitrogen-Doped Porous Carbon Matrix with Enhanced Electrocatalysis for Stable Lithium-Sulfur Batteries

Sulfophilic and lithophilic sites in bimetal nickel-zinc carbide with fast conversion of polysulfides for high-rate Li-S battery

Stabilizing Conversion Reaction Electrodes by MOF Derived N-doped Carbon Shell for Highly Reversible Lithium Storage

Crystalline/Non-Crystalline Carbon Co-Modified Strategy to Construct N, S Co-Doped Carbon Layer Wrapped Fe0.95S1.05/Carbon Nanotubes for Enhanced Lithium Storage Property

Two Birds with One Stone: Ammonium-Induced Carbon Nanotube Structure and Low-Crystalline Cobalt Nanoparticles Enabling High Performance of Lithium-Sulfur Batteries

Tuning Work Function of Fe2N@C Nanosheets by Co Doping for Enhanced Lithium Storage

LiNbO3 Coating and F- Doping Stabilize the Crystal Structure and Ameliorate the Interface of LiNi0.88Co0.06Mn0.03Al0.03O2 to Improve the Electrochemical Properties and Safety Capability