Abstract:The additive manufacturing of concrete, also known as 3D-printed concrete, is produced layer by layer using a 3D printer. The three-dimensional printing of concrete offers several benefits compared to conventional concrete construction, such as reduced labor costs and wastage of materials. It can also be used to build complex structures with high precision and accuracy. However, optimizing the mix design of 3D-printed concrete is challenging, involving numerous factors and extensive hit-and-trail experimentation. This study addresses this issue by developing predictive models, such as the Gaussian Process Regression model, Decision Tree Regression model, Support Vector Machine model, and XGBoost Regression models. The input parameters were water (Kg/m3), cement (Kg/m3), silica fume (Kg/m3), fly ash (Kg/m3), coarse aggregate (Kg/m3 & mm for diameter), fine aggregate (Kg/m3 & mm for diameter), viscosity modifying agent (Kg/m3), fibers (Kg/m3), fiber properties (mm for diameter and MPa for strength), print speed (mm/sec), and nozzle area (mm2), while target properties were the flexural and tensile strength of concrete (MPa data from 25 literature studies were collected. The water/binder ratio used in the dataset ranged from 0.27 to 0.67. Different types of sands and fibers have been used, with fibers having a maximum length of 23 mm. Based upon the Coefficient of Determination (R2), Root Mean Square Error (RMSE), Mean Square Error (MSE), and Mean Absolute Error (MAE) for casted and printed concrete, the SVM model performed better than other models. All models' cast and printed flexural strength values were also correlated. The model's performance has also been checked on six different mix proportions from the dataset to show its accuracy. It is worth noting that the lack of ML-based predictive models for the flexural and tensile properties of 3D-printed concrete in the literature makes this study a novel innovation in the field. This model could reduce the computational and experimental effort required to formulate the mixed design of printed concrete.

Machine learning-enabled characterization of concrete mechanical strength through correlation of flexural and torsional resonance frequencies

Forecasting the strength of micro/nano silica in cementitious matrix by machine learning approaches

Machine Learning-Based Compressive Strength Prediction for Concrete: an Adaptive Boosting Approach

Study of flexural strength of concrete containing mineral admixtures based on machine learning

Impact of thermal loads on silica fume-modified lightweight concrete: Machine learning approach to assess compressive strength evolution

Application of Advanced Machine Learning Approaches to Predict the Compressive Strength of Concrete Containing Supplementary Cementitious Materials

Machine learning-based prediction of concrete strength properties with coconut shell as partial aggregate replacement: A sustainable approach in construction engineering

Machine Learning Prediction of Compressive Strength of Concrete with Resistivity Modification

Performance of different machine learning techniques in predicting the flexural capacity of concrete beams reinforced with FRP rods

Machine Learning-Based Predictive Model for Tensile and Flexural Strength of 3D-Printed Concrete

Machine Learning Modeling Integrating Experimental Analysis for Predicting Compressive Strength of Concrete Containing Different Industrial Byproducts

A scientific investigation explores the application of machine learning to assess the compressive strength of red mud-based concrete, enhanced with fly ash, for potential use as a building construction material

Prediction of fracture toughness of concrete using the machine learning approach

Machine Learning Technique for the Prediction of Blended Concrete Compressive Strength

Compressive Strength of Steel Fiber-Reinforced Concrete Employing Supervised Machine Learning Techniques

Machine learning approaches for real-time prediction of compressive strength in self-compacting concrete

Compressive Strength of Concrete Cylindrical Columns Confined with Fabric-Reinforced Cementitious Matrix Composites under Monotonic Loading: Application of Machine Learning Techniques

Modeling of heterogeneous materials at high strain rates with machine learning algorithms trained by finite element simulations

Development of the New Prediction Models for the Compressive Strength of Nanomodified Concrete Using Novel Machine Learning Techniques

Learning from Sparse Datasets: Predicting Concrete's Strength by Machine Learning

Comparison of various machine learning algorithms used for compressive strength prediction of steel fiber-reinforced concrete