Parameter optimization of ZrCo–H system for durable tritium storage and delivery system of ITER
Rongxing Ye,Huaqin Kou,Wenhua Luo,Xu Huang,Tao Tang,Zhiyong Huang,Ge Sang,Jinchun Bao,Hui He
DOI: https://doi.org/10.1016/j.ijhydene.2020.11.279
IF: 7.2
2021-02-01
International Journal of Hydrogen Energy
Abstract:<p>Cycling stability of ZrCo–H system is extremely important for the long-term operation of the storage and delivery system (SDS) in ITER. Herein, the optimal cycling operation parameters were systematically investigated. It indicates that various parameters, such as hydrogen pressure, temperature, composition, and stoichiometric ratio of H atoms, will all affect the cycling performance of the ZrCo–H system significantly. The decline rate of the hydrogen capacity of the ZrCo–H system is positively correlated with the hydrogen pressure. The experimental result shows that 54% of hydrogen capacity decreases under 28.1 kPa hydrogen pressure, while 30% of attenuation is obtained when the pressure is decreased to 8.1 kPa after 14 cycles. In terms of temperature, the lowest cycling attenuation can be maintained at about 25% after 14 cycles when the dehydrogenation temperature at 550 °C. The effects of doping elements, Hf and Ti, on the cycling stability of ZrCo–H system are also compared. The Zr<sub>0.8</sub>Ti<sub>0.2</sub>Co sample exhibits higher cycling capacity than ZrCo and Zr<sub>0.8</sub>Hf<sub>0.2</sub>Co samples. The extremely excellent behavior can be achieved when all ZrCo alloys are continuously evacuated during the hydrogen release process, and the attenuation of only 1.1% is observed for Zr<sub>0.8</sub>Ti<sub>0.2</sub>Co after 15 cycles. Besides, the cycling attenuation is related to residual stoichiometric ratio of H atoms in ZrCo alloy during the cycling test. When the residual H atoms proportion exceeds 1 in ZrCo during dehydrogenation, hydrogen cycling capacity hardly fades. The XRD results reveal that the disproportionation of ZrCo is directly associated with the cycling degradation, yielding the more stable products of ZrCo<sub>2</sub> and ZrH<sub>2</sub>, However, the disproportionation can be avoided during the cycling process by controlling the stoichiometric ratio of H atoms remained in ZrCo above 1. This study demonstrates that the cycling performance of ZrCo can be substantially improved when the operation parameters are properly adjusted, which provides a significant important reference for durable running of SDS in ITER.</p>
energy & fuels,electrochemistry,chemistry, physical