Abstract:The lithium metal anode is considered as the ultimate choice for high-energy-density batteries. However, the organic-dominated solid electrolyte interphase (SEI) formed in carbonate electrolytes has a low interface energy against metallic Li as well as a high resistance, resulting in a low Li plating/stripping Coulombic efficiency (CE) of less than 99.0% and severe Li dendrite growth. Herein, inorganic-enhanced LiF-Li3N SEI is designed in commercial 1 M LiPF6/EC-DMC electrolytes by introducing lithium nitrate (LiNO3) and fluoroethylene carbonate (FEC) through a small amount of sulfolane (SL) as a carrier solvent owing to the high solubility of SL for both carbonate solvents and LiNO3. The comprehensive characterizations and simulations demonstrate that the synergistic interaction of LiNO3 and FEC additives alters the solvation structure of 1 M LiPF6/EC-DMC electrolytes and forms additive-derived LiF-Li3N SEI, which increases the average Li CE up to 99.6% in 100 cycles. The designed carbonate electrolyte enables the Li/LiNi0.80Co0.15Al0.05O2 (NCA) cell with a lean lithium metal anode (∼50 μm) to achieve an average CE of 99.7% and a high capacity retention of 90.8% after 150 cycles. This work offers a simple and economical strategy to realize high-performance lithium metal batteries in commercial carbonate electrolytes.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsenergylett.1c00365?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsenergylett.1c00365</a>.Morphology changes of lithium anodes during Li plating at different capacities in BE (<a class="ext-link" href="/doi/suppl/10.1021/acsenergylett.1c00365/suppl_file/nz1c00365_si_001.mp4">MP4</a>)Morphology changes of lithium anodes during Li plating at different capacities in BE-FEC-SL/LiNO3 (<a class="ext-link" href="/doi/suppl/10.1021/acsenergylett.1c00365/suppl_file/nz1c00365_si_002.mp4">MP4</a>)Electrolytes preparation, electrochemical measurements, materials characterization, computational method, optical morphology images, SEM images, XPS spectra, HAADF image, EELS spectrum, MD simulation results, LSV curves, CV curves, Nyquist plots, galvanostatic profiles, the detailed composition of electrolytes, and summary of the reported CE of Li plating/stripping in different carbonate electrolytes (<a class="ext-link" href="/doi/suppl/10.1021/acsenergylett.1c00365/suppl_file/nz1c00365_si_003.pdf">PDF</a>)This article has not yet been cited by other publications.

Cautious interpretation of coulombic efficiency (CE) in lithium metal batteries

Accurate Determination of Coulombic Efficiency for Lithium Metal Anodes and Lithium Metal Batteries

The Underlying Cause of Low Coulombic Efficiency in Li Metal Batteries and Mitigation Strategies

Experimental investigation on the characteristics of coulombic efficiency of lithium-ion batteries considering different influencing factors

Understanding the Relationships Between Morphology, Solid Electrolyte Interphase Composition, and Coulombic Efficiency of Lithium Metal

Study on the Correlation Between State of Charge and Coulombic Efficiency for Commercial Lithium Ion Batteries

A Breakthrough in Coulombic Reversibility of Dual-Ion Batteries at Quick Charge and Underlying Mechanisms

Rate-Dependent Failure Mechanisms and Mitigating Strategies of Anode-Free Lithium Metal Batteries

Pushing the Theoretical Limit of Li-CF(x) Batteries: a Tale of Bifunctional Electrolyte.

Lithium Metal Batteries Enabled by Synergetic Additives in Commercial Carbonate Electrolytes

Thin Plate Spline-Based Coulombic Efficiency Prediction of Lithium Battery

Coulombic Efficiency for Practical Zinc Metal Batteries: Critical Analysis and Perspectives

Tackling realistic Li+ flux for high-energy lithium metal batteries

Deciphering the effects of electrolyte concentration on the performance of lithium batteries by correlative surface characterization

Electrode Edge Effects and the Failure Mechanism of Lithium-Metal Batteries.

Fast Charging of Energy-Dense Lithium Metal Batteries in Localized Ether-Based Highly Concentrated Electrolytes

Galvanic Corrosion Underlies Coulombic Efficiency Differences in High-Performing Lithium Metal Battery Electrolytes

Recent progress and prospects of Li-CO2 batteries: Mechanisms, catalysts and electrolytes

Review—Lithium Carbon Composite Material for Practical Lithium Metal Batteries

Insight into the Critical Role of Exchange Current Density on Electrodeposition Behavior of Lithium Metal

Advances and Prospects in Improving the Utilization Efficiency of Lithium for High Energy Density Lithium Batteries