Abstract:Improving the measurement accuracy is a necessary condition for sea surface altimetry using the Global Navigation Satellite System Reflectometry (GNSS-R). The ionosphere and troposphere delay the transmission of satellite signals, which directly affect the measuring accuracy. The influence of the atmospheric environment on GNSS-R altimetry differs from different platforms. By analyzing and sorting out the altimetry data of airborne and spaceborne platforms, this paper studies the variation law of signal delay in the altimetry process from the point of view of mathematical geometry, which provides an example for improving the precision of GNSS-R altimetry measurements. Firstly, in order to facilitate data analysis, this paper constructed an altimetry model with the GNSS satellite position, specular reflection point position, receiver position as nodes, classified direct signals, and reflected signals. Secondly, calculate ionospheric puncture point coordinates , and interpolate GIM products provided by IGS using time and puncture point coordinates to obtain the VTEC value in the vertical direction of the puncture point, which was converted into the path direction STEC by projection function, the ionospheric delay of each part was obtained in this way. The tropospheric delay of each part is considered for the along-path component and the geometric component, the delay of along-path component was calculated by the UNB3m model, and the delay of geometric component was calculated by the equation provided by Nikolaidou (Nikolaidou et al., 2021). Thirdly, by comparing the sea surface height inversion results with or without atmospheric delay correction with the mean sea surface height provided by DTU15, the measurement accuracy with atmospheric delay correction is obviously improved. The study results of the influence of atmospheric delay on the altimetry experiments precision error of airborne and spaceborne platforms show that the error magnitude is consistent with the existing literature. In the airborne experiment, the influence of the ionosphere is negligible and the troposphere has sub-meter influence on altimetry results, among which the tropospheric along-path delay component occupies a high proportion. The geometric delay component has a high correlation with the satellite elevation angle and its influence on the measurement accuracy decreases with the elevation angle increase. The effect of this factor can be effectively weakened by setting a high satellite cutoff angle. In the spaceborne experiment, the effect of atmospheric delay on altimetry results fluctuates in the range of 3∼5 m when the satellite elevation angle is greater than 60°. In this paper, the method of calculating signal atmospheric delay through geometric relation to improving the measurement accuracy can provide an example for the atmospheric delay correction of GNSS-R ocean altimetry with high precision and spatial resolution in future research.

A Simple Atmospheric Delay Mapping Function for Near-Nadir Altimeters

A novel method for tropospheric delay mapping function vertical modeling

Correction of Atmospheric Delay Error of Airborne and Spaceborne GNSS-R Sea Surface Altimetry

Dynamic Estimation of the Wet Path Delay Vertical Gradients From ERA5 for Satellite Altimetry

Assessment of the Accuracy of the Saastamoinen Model and VMF1/VMF3 Mapping Functions with Respect to Ray-Tracing from Radiosonde Data in the Framework of GNSS Meteorology

An initial investigation of the non-isotropic feature of GNSS tropospheric delay

Improvement and Comparison of Multi-Reference Station Regional Tropospheric Delay Modeling Method Considering the Effect of Height Difference

A global grid model for the correction of the vertical zenith total delay based on a sliding window algorithm

Global zenith wet delay modeling with surface meteorological data and machine learning

A global grid model for the estimation of zenith tropospheric delay considering the variations at different altitudes

Utilization of WRF 3D Meteorological Data to Calculate Slant Total Delay for InSAR Atmospheric Correction

The B-spline mapping function (BMF): representing anisotropic troposphere delays by a single self-consistent functional model

Modeling and assessment of atmospheric delay for GPS/Galileo/BDS PPP-RTK in regional-scale

Development of InSAR Neutral Atmospheric Delay Correction Model by Use of GNSS ZTD and Its Horizontal Gradient

Enhancing multi-GNSS positioning performances in harsh environments via a refined joint troposphere-multipath hemispherical map

A Method by using predefined windows to improve the InSAR atmospheric correction model based on GNSS ZTD and its horizontal delay gradient

Geometric Distortion Correction of Spaceborne GNSS-R Delay-Doppler Map Using Reconstruction

An Interferometric Synthetic Aperture Radar Tropospheric Delay Correction Method Based on a Global Navigation Satellite System and a Backpropagation Neural Network: More Suitable for Areas with Obvious Terrain Changes

Improvement Analysis of a Height‐Deviation Compensation‐Based Linear Interpolation Method for Multi‐Station Regional Troposphere

Mitigating atmospheric effects in InSAR measurements through high-resolution data assimilation and numerical simulations with a weather prediction model

Discussion on the Reliability of the Mapping Function from Standard Atmosphere