Abstract:Highlights•CB/ nanocomposites composed of sustainable carbon black and anchored nanoparticles have been successfully synthesized.•As a novel lightweight electromagnetic wave absorber, the optimal RLmin and EAB of -53.989 dB and 6.0 GHz were achieved at thin thickness.•A reasonable absorption mechanism was proposed according to various loss mechanism induced by different components.Recently, developing carbon-based hybrid materials loaded with magnetic components has been generally regarded as a promising and practically feasible strategy when it comes to constructing lightweight electromagnetic wave absorbers. In the current work, reclaimed carbon black (CB) nanopowder was firstly produced by simple burning of wheat straw, which was then employed as sustainable carbon-based host materials (carrier) and successfully decorated nanoparticles via a simple thermal reduction process. Remarkably, both the as-fabricated nanocomposites and corresponding electromagnetic wave absorption performances could be effectively tuned by tailoring the dosage of the nanoparticles. The minimum reflection loss (RLmin) of –53.989 dB was achieved for CB/# at 2.28 mm thickness, meanwhile, CB/# was featured by a wide effective absorption band (EAB) of 6 GHz (6.72–12.72 GHz) at a 2.73 mm matching thickness, which covered the entire X band, suggesting that the CB/ nanocomposites were an attractive candidate for electromagnetic wave absorber. According to the synergistic influence of dielectric loss and magnetic loss from CB and , respectively, as well as the properly matched impedance, a reasonable electromagnetic wave attenuation mechanism was illustrated. It is noteworthy that the preparation process of CB is a facile, recycled, and low-cost strategy for achieving nanoscale carbon-based absorbing materials, moreover, the CB/ nanocomposites provide a reference for constructing lightweight dielectric-magnetic products with superb electromagnetic wave absorption performances.

Preparation of nickel slag derived Fe3O4/conductive carbon black/natural rubber composites and enhanced microwave absorption

From waste to wealth: Crumb rubber@carbon nanotube/Fe3O4 composites towards highly effective electromagnetic microwave absorption with wide bandwidth

Microwave Absorption Properties of Magnetite Particles Extracted from Nickel Slag

Ni-MOF74 derived nano nickel particle and porous carbon composites with Ni0.5Zn0.5Fe2O4 for enhancing microwave absorbing properties

Fabrication of Nd-doped Ni–Zn ferrite/multi-walled carbon nanotubes composites with effective microwave absorption properties

NiCoZn/C@melamine sponge-derived carbon composites with high-performance electromagnetic wave absorption

Post-consumer plastics/Co Mn3–O4 spinels derived Co/MnO@carbon nanotube composites towards advanced electromagnetic absorbents

Preparation and Microwave Absorption Properties of FeNi Alloy/Carbon Nanotube Composites

In situ preparation of carbon/Fe3C composite nanofibers with excellent electromagnetic wave absorption properties

Ni-MOF74 derived nano nickel particle and porous carbon composites with Ni0·5Zn0·5Fe2O4 for enhancing microwave absorbing properties

Coal gasification fine slag residual carbon decorated with hollow-spherical Fe3O4 nanoparticles for microwave absorption

Synergistic impacts of Fe/Fe3C and Fe-Nx on high-efficiency microwave-absorbing properties of Fe/Fe3C@NC composites

Monodispersed Co@C nanoparticles anchored on reclaimed carbon black toward high-performance electromagnetic wave absorption

Microwave Absorption Enhancement of Porous C@CoFe2O4 Nanocomposites Derived from Eggshell Membrane

Structural and Carbonized Design of 1D FeNi/C Nanofibers with Conductive Network to Optimize Electromagnetic Parameters and Absorption Abilities

Carbon Nanotubes/ni and Chain-Like Carbon Nanospheres/ni Nanocomposites: Selective Production and Their Microwave Absorption Performances

Controllable synthesis of porous carbon@Fe20Ni80 composites with improved microwave absorption performance

MWCNTs as Conductive Network for Monodispersed Fe3O4 Nanoparticles to Enhance the Wave Absorption Performances

Facile synthesis of NiFe2O4/Ni3Fe/LAS core-shell-like composites with improved impedance matching and microwave absorption properties

Synthesis of Hierarchical Carbon Nanofibers-Coni/C Composites for Enhanced Microwave Absorption Efficiency

Broadband Electromagnetic Wave Absorption of Ni0.5Zn0.5Nd0.04Fe1.96O4 Ferrites Modified by Nano-Silver Particles