Abstract:Purpose This study aims to investigate the effects of ball–material ratio on the properties of mixed powders and Cu-Bi self-lubricating alloy materials. Design/methodology/approach Cu-Bi mixed powder was ball milled at different ball–material ratios, and the preparation of Cu-Bi alloy materials was achieved through powder metallurgy technology. Scanning electron microscopy, X-ray diffraction and Raman spectroscopy were conducted to study the microstructure and phase composition of the mixed powder. The apparent density and flow characteristics of mixed powders were investigated using a Hall flowmeter. Tests on the crushing strength, impact toughness and tribological properties of self-lubricating alloy materials were conducted using a universal electronic testing machine, 300 J pendulum impact testing machine and M200 ring-block tribometer, respectively. Findings With the increase in ball–material ratio, the spherical copper matrix particles in the mixed powder became lamellar, the mechanical properties of the material gradually reduced, the friction coefficient of the material first decreased and then stabilized and the wear rate decreased initially and then increased. The increase in the ball–material ratio resulted in the fine network distribution of the Bi phase in the copper alloy matrix, which benefitted its enrichment on the worn surface for the formation a lubricating film and improvement of the material's tribological performance. However, a large ball–material ratio can excessively weaken the mechanical properties of the material and reduce its wear resistance. Originality/value The effects of ball–material ratio on Cu-Bi mixed powder and material properties were clarified. This work provides a reference for the mechanical alloying process and its engineering applications.

Preparation and properties of lead-free FeS/Cu-Bi composites by flake powder metallurgy via shift-speed ball milling

Long-term Ball Milling and Hot Pressing of In-Situ Nanoscale Tungsten Carbides Reinforced Copper Composite and Its Characterization

Properties of lead-free copper matrix composites prepared through in situ Ni-coated FeS surface modification and mechanical alloying

Preparation and properties of lead-free copper matrix composites by electroless plating and mechanical alloying

Achieving Homogeneous Fe Distribution and High Strength in Cu-Fe Composite Consolidated by Powder Rolling

Attaining Exceptional Electrical Conductivity in Cu-Fe Composite by Powder Rolling Strategy

Tailoring Cu nano Bi self-lubricating alloy material by shift-speed ball milling flake powder metallurgy

Mechanical and tribological properties of FeS/Cu–Bi self-lubricating materials reinforced with copper-plated steel fibers

Balanced strength and ductility in CNT/Al composites achieved by flake powder metallurgy via shift-speed ball milling

Effect of ball–material ratio on Cu-Bi mixed powder and self-lubricating material properties

Tailoring the structure and mechanical properties of graphene nanosheet/aluminum composites by flake powder metallurgy via shift-speed ball milling

Investigation on Microstructure Characteristics and Tribological Properties of Self-Lubricating Metallic Composites Based on Hexagonal Boron Nitride and Molybdenum Disulphide

Preparation of B4Cp/Al Composites via Selective Laser Melting and Their Tribological Properties

Effect of LaF3 on the Properties of Pb‐Free Cu‐Based Self‐Lubricating Composites

Improving wear performance of CuSn5Bi5 alloys through forming self-organized graphene/Bi nanocomposite tribolayer

Effect of Cu content on the microstructure and properties of sintered Fe-0.8C-xCu antifriction materials

Balanced Mechanical and Tribological Performance of High-Frequency-Sintered Al-SiC Achieved via Innovative Milling Route—Experimental and Theoretical Study

Metallurgical reactions and tribological properties of self-lubricating Al-WS2 composites: Laser powder bed fusion Vs. spark plasma sintering

Tribological performances of CuSn10Bi3 alloy containing MoSi2 and ferrophosphorus under starved lubrication

Preparation and properties of FeS/iron-based self-lubricating materials by chemical nickel plating-mechanical alloying

Microstructure, mechanical properties and arc erosion behavior of CuW composites prepared by high energy ball milling and spark plasma sintering