Abstract:Abstract Per recent analyses, in the near future, over half amount of the oil extracted globally, will require some form of enhanced oil recovery (EOR) techniques. Existing literature and historical investigations suggest that in oil reservoirs having viscosities between 10 – 150 m.Pa.s, there is a significant potential for tertiary recovery through the application of polymer flooding. For reservoir oil viscosities above 150 mPa.s, the polymer pumping efficiency goes down as polymer injectivity reduces significantly with increasing injection water viscosity that are used to attain a favorable mobility ratio at such high oil viscosities. To overcome this limiting factor, in this study, we propose the use of supramolecular assemblies (SMA) that have adjustable viscosity properties. Complexation of long-chain amino-amides and maleic acid is used to make these assemblies, which allow it to have reversible viscosity depending on the solution pH level. To maintain high injection efficiency, during pumping, SMA solutions will be kept at low viscosity values. On entry in deep reservoir or at oil contact phase, through introduction of an external stimulus the viscosity of SMA solution will be reversed to a much higher viscosity. This will allow to sufficiently improve the mobility ratio. Preliminary results from lab-scale studies have indicated that along with reversibly adjustable viscosity property, SMA solutions are also tolerant to high temperatures and salt concentrations. Supramolecular solutions can be considered as healable polymer systems, since unlike conventional polymer they disassemble and re-assemble when exposed to high temperature and stress conditions. In such conditions, conventional polymers generally undergo degradation. Additionally, through molecular scission processes SMA solutions can also be used in highly confining environments as well as in permafrost conditions and thin zones where conventional thermal techniques are not applicable. The objective of this work is the development of novel SMA system that have the aforementioned properties of reversibly adjustable viscosity through pH, tolerance to high temperature and salt concentrations through desired interfacial properties. Lab-scale preliminary results have shown the potential economic benefits of the use of SMA solutions on a field-wide scale. Based on the results, it must be emphasized that SMA systems have a worldwide application in oil reservoirs for EOR purposes.

Characterized Functional Groups of Temperature- and Salt-Resistant Copolymers and Surfactants and Their Relationships

JIN Zhiyuan1,2, SHAN Guorong2,3, PAN Pengju2,3

Smart Nanoparticles for Conformance Improvement in Waterflooding

Insight into functional groups of salt compounds on the performance of viscoelastic surfactant-based fluids

A New Thermal Stable and Salt Tolerant Alkyl Polyether Benzyl Sulfonate Surfactant with Ultralow Interfacial Tensions for Enhanced Oil Recovery

Salt resistance study and molecular dynamics simulation of hydrophobic-association polymer with internal salt structure

Molecular dynamics study of the effect of inorganic salts on the monolayer of four surfactants at the oil/water interface

Assessment of Polyacrylamide Based Co-Polymers Enhanced by Functional Group Modifications with Regards to Salinity and Hardness

Effect of molecular weight on the properties of water-soluble terpolymers for heavy oil viscosity reduction

A systematic rheological study of alkyl amine surfactants for fluid mobility control in hydrocarbon reservoirs

Preparation and Performance Evaluation of Self-Cementing Nanoscale Polymeric Microspheres with Salt and Temperature Tolerance

Application and Study Progress on Salt-tolerant Comb-shaped Polymer

Synthesis and performance evaluation of temperature and salt-resistant organic/inorganic composite copolymers

Synthesis and molecular dynamics simulation of amphoteric hydrophobically associating polymer

Investigation of a hydrophobically associating polymer’s temperature and salt resistance for fracturing fluid thickener

Solution behavior of fluorocarbon-modified polyacrylamide copolymers

Controlling filtration loss of water-based drilling fluids by anionic copolymers with cyclic side groups: High temperature and salt contamination conditions

Design, synthesis and properties evaluation of emulsified viscosity reducers with temperature tolerance and salt resistance for heavy oil

Fracturing Fluid Polymer Thickener with Superior Temperature, Salt and Shear Resistance Properties from the Synergistic Effect of Double-Tail Hydrophobic Monomer and Nonionic Polymerizable Surfactant

Preparation and performance evaluation of a novel temperature-resistant anionic/nonionic surfactant

Binary system of alkyl polyether carboxylate and quaternary ammonium with ultra-low interfacial tension at high temperature and a wide range of salinity