Abstract:High-entropy materials (HEMs) play a significant role in the electrocatalytic oxygen evolution reaction (OER) due to their unique properties. However, there are still challenges in the preparation of HEMs for OER catalysts. In this study, the FeCoNiMnCr catalyst is synthesized for the first time using the ultrasonic hydrothermal-sintering technique and exhibits excellent performance for OER electrocatalysis. There is an optimal ultrasonic hydrothermal time and power for achieving the best OER performance. The results demonstrate that the performance of FeCoNiMnCr catalysts prepared through ultrasonic hydrothermal sintering (US-FeCoNiMnCr) is significantly improved compared with the traditional hydrothermal-sintering method. The US-FeCoNiMnCr catalyst exhibits an overpotential of 228 mV at the current density of 10 mA cm−2 and a Tafel slope as low as 45.39 mV dec−1 in an alkaline medium. Moreover, the US-FeCoNiMnCr catalyst demonstrates remarkable stability in electrocatalytic OER with a minimal potential increase observed even after 48 h. This work not only provides valuable insights into high-entropy material synthesis, but also presents a powerful electrocatalyst for water electrolysis.

What problem does this paper attempt to address?

The paper mainly addresses the following issues: 1. **Background and Challenges**: With the increasing severity of global greenhouse effects and environmental pollution, finding clean and alternative energy sources has become urgent. Hydrogen energy, as an efficient, sustainable, and highly scalable clean energy, has garnered widespread attention. However, the current global hydrogen production mainly relies on fossil fuels, which not only generates a large amount of carbon dioxide emissions but also has a high cost for water electrolysis, especially for the oxygen evolution reaction (OER), which is a crucial half-reaction in water electrolysis. Its kinetics are relatively slow and require efficient electrocatalysts to accelerate the reaction process. 2. **Research Objective**: To develop a low-cost and high-efficiency electrocatalyst synthesis method to improve the catalytic performance of the oxygen evolution reaction (OER). 3. **Solution**: This paper proposes an ultrasonic-assisted hydrothermal sintering method to synthesize high-entropy materials (HEMs) and use them as electrocatalysts for the oxygen evolution reaction. The FeCoNiMnCr catalyst prepared by this method exhibits excellent OER catalytic performance, with significant improvements in overpotential and Tafel slope compared to catalysts prepared by traditional hydrothermal sintering methods. 4. **Experimental Results**: The catalyst prepared by the ultrasonic-assisted hydrothermal sintering method has an overpotential of only 228 mV at a current density of 10 mA cm⁻², a Tafel slope of 45.39 mV dec⁻¹, and demonstrates excellent stability in a 48-hour stability test. Additionally, in-situ Raman spectroscopy analysis revealed the structural changes of the catalyst during the OER process. 5. **Conclusion and Significance**: This study proposes an efficient and simple catalyst synthesis method that not only shortens the hydrothermal synthesis time and improves catalyst performance but also provides new ideas and methods for the future synthesis of electrocatalysts. This is of great significance for promoting the development of clean energy technologies.

Ultrasound-Assisted Synthesis of High-Entropy Materials for Enhanced Oxygen Evolution Electrocatalysis

Novel High-Entropy FeCoNiMoZn-Layered Hydroxide as an Efficient Electrocatalyst for the Oxygen Evolution Reaction

Fabricating Spinel-Type High-Entropy Oxides of (Co, Fe, Mn, Ni, Cr)3O4 for Efficient Oxygen Evolution Reaction

Microwave Solvothermal Synthesis of Component-Tunable High-Entropy Oxides As High-Efficient and Stable Electrocatalysts for Oxygen Evolution Reaction.

High-entropy FeCoNiCuAlV sulfide as an efficient and reliable electrocatalyst for oxygen evolution reaction

Amorphous high entropy oxides based on polyoxometalate clusters to accelerate surface reconstruction for oxygen evolution reaction

A novel septenary high-entropy (oxy)hydroxide electrocatalyst for boosted oxygen evolution reaction

Electrochemical Deposited Amorphous Bimetallic Nickle-Iron (oxy)hydroxides Electrocatalysts for Highly Efficient Oxygen Evolution Reaction

Coupling high entropy oxide with hollow carbon spheres by rapid microwave solvothermal strategy for boosting oxygen evolution reaction

Sub-3-nm High-Entropy Metal Sulfide Nanoparticles with Synergistic Effects as Promising Electrocatalysts for Enhanced Oxygen Evolution Reaction

Synthesis of a Nanoporous Oxygen-Vacancy-Rich Iron-Nickel Double Hydroxide Composite as a High-Performance Electrocatalyst for Oxygen Evolution Reaction

In‐situ Reconstruction of High‐Entropy Heterostructure Catalysts for Stable Oxygen Evolution Electrocatalysis Under Industrial Conditions

Porous high-entropy oxide nanosheets as highly-efficient electrocatalysts for water oxidation

High-Entropy Alloy Catalysts of FeCoNiCuMo/C with High Stability for Efficient Oxygen Evolution Reaction

Low-temperature synthesized amorphous quasi-high-entropy carbonate electrocatalyst with superior surface self-optimization for efficient water oxidation

Oxygen Vacancy-Enriched Amorphous Transition Metal Ternary Oxides Toward Highly Efficient Oxygen Evolution Reaction

High-Entropy Heterostructures Modulated by Oxyphilic Transition Metals for Efficient Oxygen Evolution Reaction

A High Entropy Metallic-High Entropy Nonmetallic Community As a High Performance Electrocatalyst for the Oxygen Evolution Reaction and Oxygen Reduction Reaction.

Amorphous FeCoNiMnCr high-entropy alloy supported by 2H-MoS2 on carbon cloth as a highly efficient and robust electrocatalyst for water oxidation

High-entropy Sulfurization Enables Efficient Non-Noble Metal-Based NiCoFeCuS Electrocatalyst for Alkaline Oxygen Evolution Reaction

Amorphous high-entropy IrRuCrFeCoNiO x as efficient water splitting oxygen evolution reaction electrocatalysts