Propagation velocity of landslide-induced liquefaction and entrainment of overridden loose, saturated sediments

Liam J. Steers,Ryley A. Beddoe,W. Andy Take

DOI: https://doi.org/10.1016/j.enggeo.2024.107523

IF: 6.902

2024-04-24

Engineering Geology

Abstract:Loose saturated granular materials are particularly susceptible to instability, resulting in deviatoric strain softening, and static liquefaction. When instability occurs in the context of a landslide, the consequences in terms of the mobility of the debris and risk to life and property can be catastrophic. Physical model landslides initiated in a geotechnical centrifuge under rising groundwater conditions were used to trigger instability and static liquefaction. Four experiments with a loose contractile soil and two experiments with a dense dilative soil were performed. The velocity of propagation of the liquefaction front within the loose granular soils at the base of a landslide was quantified using a dense sensor network of pore water pressure sensors and high-speed imaging. On triggering of a landslide, a localized toe failure was observed to shear and liquefy the soil at the base of the landslide. However, the velocity of this initial failure (0.5 m/s) was an order of magnitude slower than the subsequent 4.2 m/s propagation velocity of the liquefaction front. These experiments demonstrated and quantified how a localized failure onto a liquefiable deposit may propagate liquefaction much farther than simply the runout of the localized failure, and highlight the potential implications and consequences of such an occurrence.

geosciences, multidisciplinary,engineering, geological