The incipient motion safety factor of sediment considers the coupling between the surface and subsurface flows under multi-motion modes
Dongxu Li,Shuai Zhang,Zhihui Ni,Zixuan Zhai
DOI: https://doi.org/10.1016/j.jhydrol.2024.130708
IF: 6.4
2024-01-25
Journal of Hydrology
Abstract:The incipient movement of sediment particles in natural rivers under the action of water scour has remained a key issue in river sediment movement research. In this study, we establish a mathematical coupling model between surface and subsurface flows for investigating the interface velocity. The Navier-Stokes equation and Darcy's law are employed to describe surface and subsurface water flows, respectively. The interface velocity U between surface and subsurface flows is derived by introducing the Beavers–Joseph boundary conditions. Furthermore, based on the force equilibrium of a single particle, combined with three incipient modes, namely, sliding, rolling, and saltation, analytical solutions are derived for the critical instantaneous bottom velocity u 0 , and mean incoming velocity. The derived analytical solutions exhibit a higher computational accuracy than existing flume test data and classical flow velocity model results, with relative errors less than 12%. Furthermore, the incipient motion state of sediment particles can be directly assessed by defining the critical incipient safety factor for particle motion (i.e., k = U / u 0 ). Sensitivity analysis of the safety factor for sediment particle motion reveals a nonlinear positive correlation with the slope angle, riverbed permeability, riverbed porosity, and hydraulic gradient, while indicating a linear positive correlation with the water depth. However, a nonlinear negative correlation is observed with the B-J coefficient, relative exposure degree, and sediment particle dry bulk density. The safety factor shows a rapid decrease followed by a stabilizing trend with increasing B-J coefficient. Additionally, the safety factor first increases and then decreases with increasing in sediment particle size.
geosciences, multidisciplinary,water resources,engineering, civil