Enhancing coalbed methane recovery with liquid CO2 fracturing in underground coal mine: From experiment to field application

Shixing Fan,Duo Zhang,Hu Wen,Xiaojiao Cheng,Xiangrong Liu,Zhijin Yu,Bosheng Hu

DOI: https://doi.org/10.1016/j.fuel.2020.119793

IF: 7.4

2021-04-01

Fuel

Abstract:<p>CO₂ is both a primary greenhouse gas and an available energy source. In this study, a new type of underground coal permeability enhancement technique by liquid CO₂ (L-CO₂) fracturing is proposed. The key parameters that determine the feasibility of the technique are identified: L-CO₂ injection pressure and flow rate. Based on the principle of stress superposition and the experiments for L-CO₂ fracturing under true triaxial stress conditions, the calculation models of the initiation pressure and flow were determined. The mathematical model of the initiation pressure of the L-CO₂ fracturing of coal is verified, and the quantitative relationship between the injection flow rates of L-CO₂ and hydraulic fracturing is derived. Accordingly, a complete set of underground high-pressure (30 MPa) L-CO₂ fracturing equipment for coal permeability enhancement is developed. A field test of the coal permeability enhancement by fracturing in an upward cross-borehole was performed. The results confirm that after the fracturing, the gas drainage mixed flow and pure flow of the observation borehole that was located 25 m distant from the fracturing borehole increased by 3.2 and 3.3 times, respectively, and the maximal CO₂ concentration in the observation borehole was 40%. The influence radius of the L-CO₂ fracturing was determined to be approximately 25 m. Compared with areas with no coal permeability enhancement measures, the average single-borehole gas drainage concentration increased by approximately 1.57 times, and the pure flow increased by approximately 1.82 times within a radius of 25 m after L-CO₂ fracturing.</p>

energy & fuels,engineering, chemical

What problem does this paper attempt to address?

This paper aims to solve the problem of efficient recovery of coalbed methane (CBM) in Chinese coal mines. Specifically, the research proposes a new method to enhance the permeability of underground coal seams through liquid carbon dioxide (L - CO₂) fracturing technology. This technology can not only improve the permeability of coal seams and promote the effective emission of coalbed methane, but also use CO₂ to displace methane gas in coal seams, achieving greenhouse gas emission reduction and effective resource utilization.

The key research points of the paper include:
- **Determining technical feasibility parameters**: It mainly discusses the influence of two key parameters, L - CO₂ injection pressure and flow rate, on the technical feasibility.
- **Experimental verification**: Based on the principle of stress superposition, L - CO₂ fracturing experiments were carried out under true triaxial stress conditions to determine the calculation models of fracturing initiation pressure and flow rate.
- **Mathematical model verification**: The mathematical model of L - CO₂ fracturing initiation pressure was verified, and the quantitative relationship between L - CO₂ injection flow rate and hydraulic fracturing was deduced.
- **Equipment development and field application**: A complete set of high - pressure (30 MPa) L - CO₂ fracturing equipment was developed to enhance the permeability of coal seams and field tests were carried out in actual mines.

Through these studies, the paper proves the effectiveness of L - CO₂ fracturing technology in improving the permeability of coal seams and the recovery rate of coalbed methane, providing a new solution for the transformation of low - permeability coal seams.