On the Joining of High‐Strength Dissimilar Inconel 600 and SS316L Materials by Friction Stir Welding with Improved Mechanical Properties and Localized Corrosion Resistance

Sanjay Raj,Pankaj Biswas,Malar Vadani,Ajaykumar Yadav,K. S. N. Vikrant,Ayan Bhowmik

DOI: https://doi.org/10.1002/adem.202400767

IF: 3.6

2024-10-19

Advanced Engineering Materials

Abstract:This research has demonstrated the achievement of a defect‐free friction stir welding (FSW) joints of dissimilar alloys—Inconel 600 with SS316L alloys. A high volumetric flow of SS316L material into the IN600 region occurs in the stirring zone of the joints. The FSW joints demonstrate refined Ni‐ and Fe‐rich austenite phases in the welded section with high dislocation densities generated as a consequence of high degree of plastic flow of materials. The tensile and corrosion properties of the dissimilar joints have been discussed. The present work thoroughly investigates the friction stir welding of dissimilar high‐strength materials Inconel 600 (IN600) and SS316L and its effect on welded microstructure, mechanical, and corrosion properties. The microstructure and crystallographic textures of the nugget zone are investigated using the electron backscattered diffraction technique and transmission electron microscopy. The mechanical properties of the joints are evaluated using hardness and tensile testing and the electrochemical behavior of the joints is also investigated. The microstructural examination reveals a high degree of material plastic flow, both IN600 and SS316L, in the weld zone with uniform distribution of fine M23C6 carbides. The weld zone comprises a dynamically recrystallized fine‐grained structure of γ‐Fe and γ‐Ni that results in improved mechanical properties and high weld efficiency (≈95%) of the joints. The fine microstructure in the weld zone is characterized by a high dislocation density in these low stacking fault materials. The electrochemical results show that the corrosion resistance of the cross‐sectional region is higher than the top surface region and lower than the base IN600. The combined effect of grain refinement, high degree of material intermixing, and distribution of fine carbide precipitates cumulatively is found responsible for the improved corrosion resistance of the nugget zone.

materials science, multidisciplinary