Abstract:The European Space Agency is currently supporting the research and development of advanced radioisotope power systems utilising thermoelectric modules. The performance of thermoelectric modules following exposure to neutron radiation is of significant interest due to the likely application of radioisotope thermoelectric generators in deep space exploration or planetary landers requiring prolonged periods of operation. This study utilises impedance spectroscopy to characterise the effects of neutron irradiation on the performance of complete thermoelectric modules, as opposed to standalone material. For a 50 We americium-241 radioisotope thermoelectric generator design, it is estimated that the TE modules could be exposed to a total integrated flux of approximately 5 × 1013 neutrons cm-2 (>1 MeV). In this study, an equivalent neutron dose was simulated experimentally via an acute 2-hour exposure in a research pool reactor. Bi2Te3-based thermoelectric modules with different leg aspect ratios and microstructures were investigated. Gamma-ray spectroscopy was initially used to identify activated radionuclides and hence quantify irradiation induced transmutation doping. To evaluate the thermoelectric properties pre- and post-irradiation, impedance spectroscopy characterization was employed. Isochronal thermal annealing of defects imparted by the irradiation process, revealed that polycrystalline based modules required significantly higher temperature than those with a monolithic microstructure. Whilst this may indicate a greater susceptibility to neutron irradiation, all tested modules demonstrated sufficient radiation hardness for use within an americium-241 radioisotope thermoelectric generator. Furthermore, the work reported demonstrates that impedance spectroscopy is a highly capably diagnostic tool for characterising the in-service degradation of complete thermoelectric devices.

Safety methodology for space nuclear systems. Final report

Safety Studies for the ESA Space Nuclear Power Systems: Accident Modelling and Analysis

Preliminary report postoperational safety of reactor power system for NASA space station. Volume III. Safety analysis

A methodology for the risk analysis of fission‐reactor space nuclear systems

Preliminary nuclear safety assessment of the NEPST (Topaz II) space reactor program

European Radioisotope Thermoelectric Generators (RTGs) and Radioisotope Heater Units (RHUs) for Space Science and Exploration

Nuclear Security Considerations for Space Nuclear Power: A Review of Past Programs with Recommendations for Future Criteria

Neutronics Analysis of A 100 kWe Pebble Bed Space Reactor Concept

Bayesian Reliability Analysis of the Enhanced Multimission Radioisotope Thermoelectric Generator

Considerations for Implementing Presidential Memorandum-20 Guidelines for Nuclear Safety Launch Authorization for Future Civil Space Missions

Critical Design Features of Thermal-Based Radioisotope Generators: A Review of the Power Solution for Polar Regions and Space

Space Nuclear Power and Propulsion at USNC-Tech

Impedance spectroscopy characterization of neutron irradiated thermoelectric modules for space nuclear power

Subcritical space nuclear system without most movable control systems

Overview of NASA's space radiation research program

Thermal and Electrical Performance Analyses of a 100-W Radioisotope Thermoelectric Generator for Space Exploration

Mission Analysis of a Neptune Detector with a 10 Kwe Nuclear Reactor Power Generator

Criticality Safety Issues in Nuclear Design of HP-SMTCs Space Reactor

Assuring Radiation Tolerance of a Langmuir Probe Instrument for Low-Cost Interplanetary Missions

Neutronics and thermal–hydraulics analysis of a liquid metal fast reactor for expandable lunar surface power

Thermal‐hydraulic analysis of gas‐cooled space nuclear reactor power system with closed Brayton cycle