Abstract:Although salt hydrate is characterized as a potential energy storage material, some of its disadvantages still can be encountered, such as mismatched phase change temperature, low thermal conductivity, phase separation, and large supercooling. In this paper, a novel composite phase change material (CPCM) with sodium acetate trihydrate (SAT) as the main body is fabricated by melting blending for heat pump system. Potassium chloride (KCl) is used as a modification agent to modulate the SAT phase change temperature. Carboxyl methyl cellulose (CMC) and disodium phosphate dodecahydrate (DSP) are employed as thickening and nucleating agents to address the phase separation and supercooling issues, respectively. Expanded graphite (EG) is utilized as a high heat conduction additive to enhance the thermal conductivity. Furthermore, the thermal properties and stability of the novel CPCM are studied. In order to identify the thermal properties of the novel CPCM, a high energy density coil-type latent heat thermal energy storage (LHTES) unit employing the CPCM as energy storage material is set up, while a cycle of thermal charge and release in the unit between heating at 70 °C and cooling at 30 °C is designed to accommodate a scenario of residential heating. The experimental and numerical results indicate that the modified SAT yielded the desired phase change temperature of 49.3 °C, high latent heat of 224.6 kJ/kg, low supercooling degree of 0.96 °C and high thermal conductivity of 0.981 W/(m·K) are recognized when a minor ingredient with 8 wt% KCl, 4 wt% CMC, 4 wt% DSP and 3 wt% EG in the melting blend is prepared. Besides, the novel CPCM also exhibits good thermal stability with a latent heat loss of 7.14 % and supercooling degree remaining within 5 °C after 200 cycles. Moreover, the heat storage density of the LHTES unit employing the novel CPCM is up to 385.93 kJ/L, and its heat charge and release efficiency reaches to 91.39 %. Further, the average heat storage and release power of the proposed LHTES unit shows an increasing trend with a higher flow rate within a certain range. The findings of this study can provide a guidance for the large-scale thermal energy storage applications of SAT.

Closed-cell, phase change material-encapsulated, emulsion-templated monoliths for latent heat storage: Flexibility and rapid preparation

Encapsulation of Phase Change Materials Via Interfacial Miniemulsion Polymerization for High Thermal Energy Storage Density

Closed-Cell, Phase Change Material-Encapsulated Monoliths from a Reactive Surfactant-Stabilized High Internal Phase Emulsion for Thermal Energy Storage

N-octanoic acid-based phase change composites synthesized by absorption polymerization for efficient thermal energy storage

Preparation and Thermal Properties of Propyl Palmitate-Based Phase Change Composites with Enhanced Thermal Conductivity for Thermal Energy Storage

Absorption-polymerization method for synthesizing phase change composites with high enthalpy and thermal conductivity for efficient thermal energy storage

Thermal Sensitive Flexible Phase Change Materials with High Thermal Conductivity for Thermal Energy Storage

Research on the low-temperature waste heat storage performance of a novel microencapsulated phase change material with a double-shell encapsulation of hexadecylamine

Fabrication and Characterization of a Novel Polyurethane Microencapsulated Phase Change Material for Thermal Energy Storage

Facile and low energy consumption synthesis of microencapsulated phase change materials with hybrid shell for thermal energy storage

Polyurethane/n-octadecane@silicon dioxide-polyhydroxyethyl methacrylate form-stable phase change materials with enhanced mechanical properties and thermal energy storage

Sea urchin skeleton-inspired triply periodic foams for fast latent heat storage

Micro-encapsulated paraffin/high-density polyethylene/wood flour composite as form-stable phase change material for thermal energy storage

Preparation of a novel sodium acetate trihydrate-based composite phase change material and thermal performance of its integration in a coil-type thermal energy storage unit for heat pump system

A Facile Hydrothermal Preparation for Phase Change Materials Microcapsules with a Pliable Self-Recovering Shell and Study on Its Thermal Energy Storage Properties

Preparation, Characterization, and Thermal Properties of Microencapsulated Phase Change Material for Low-Temperature Thermal Energy Storage

Thermal conductivity enhancement of a sodium acetate trihydrate–potassium chloride–urea/expanded graphite composite phase–change material for latent heat thermal energy storage

Development of a novel Al-Si microcapsules with heat-resistant, high latent heat, and efficient solar heat absorption

Flexible core–shell structured Al-Cu alloy phase change materials for heat management

Microencapsulation of Molten Salt in Titanium Shell for High‐Temperature Latent Functional Thermal Fluid

Thermally Conductive and Shape‐Stabilized Polyethylene Glycol/Carbon Foam Phase‐Change Composites for Thermal Energy Storage