Abstract:Purpose The purpose of this paper is to investigate and restrain the cross-coupling effect among X, Y and Z-axes of a three degrees of freedom hybrid magnetic bearing (3-DOF HMB). The influence of the cross-coupling effect on the force characteristics and stiffnesses are analysed. Two additional methods are proposed to eliminate the cross-coupling effect. Design/methodology/approach Analysis with finite element method (FEM) is time-consuming because of the requirement of a 3D model for the studied 3-DOF HMB. Hence, an improved magnetic circuit model considering the leakage, cross-coupling and saturation effects is used to investigate the cross-coupling effect in this paper. In addition, two restraining methods are proposed. One is adding an auxiliary coil between radial and axial stators. The other is adding an iron ring between the PM and radial or axial stator. Findings The X-axis (or Y-axis) force characteristics and stiffnesses are significantly influenced by the Z-axis current, while other axes force characteristics and stiffnesses do not show the cross-coupling effect. Moreover, this cross-coupling effect is inversely related to the distance between axial thrust disk and radial MB part. Besides, adding an auxiliary coil can effectively eliminate the cross-coupling effect in whole work range and adding an iron ring can reduce the cross-coupling effect. Originality/value The cross-coupling effect and its restraining methods of a 3-DOF HMB are investigated, which is beneficial to the design and control of such 3-DOF HMB.

Study on the Influence of Magnetic Circuit Saturation on Suspension Performance of Bearingless Permanent Magnet Synchronous Motor

FEM Analysis and Application of Saturation Effect PMLSM Winding Inductance

Analysis and Comparison of Inductance and Suspension Force for 2-4 Type and 4-2 Type Multiphase Permanent Magnet Bearingless Motors

Research on Magnetic Saturation of Active Magnetic Bearings

ANALYTICAL MODELING AND PARAMETER EXTRACTION OF THE MAGNETIC LEVITATION FORCE FOR AN INSET PERMANENT MAGNET TYPE BEARINGLESS MOTOR

Dynamic Modeling of Surface-Mounted Permanent Magnet Motors Considering Saturation

Comprehensive Analysis of Suspending Force for Improved Bearingless Switched Reluctance Motor with Permanent Magnets in Stator Yoke

Experimental analysis and simulation of saturation effects in interior permanent-magnet synchronous motor

A new type of sinusoidal suspension winding Consequent-pole Bearingless Permanent Magnet Synchronous Motor

Influence of Magnetic Saturation on Torque Ripple of Permanent Synchronous Motors

Design and Function Analysis of Multiphase PM Bearingless Motor with Single Set of Windings

Torque Analytical Model of Switched Reluctance Motor Considering Magnetic Saturation

Researches on Behavior of Vibration in Axial Flux Permanent Magnet Synchronous Motor

Magnetic radial force model of bearingless switched reluctance motors

Investigation of Cross-Coupling Effect of a 3-DOF Magnetic Bearing Using Magnetic Circuit Method

Multi-field Coupled Analysis of a Permanent Magnet Synchronous Motor: Application to High Speed Rail Traction

Analysis and Control of Seven-Phase Permanent-Magnet Bearingless Motor with Single Set of Half-Coiled Winding.

Electromagnetic Modeling and Investigation for Bearingless Switched Reluctance Motor Considering Magnetic Saturation

Study on the Effect of Suspension Windings on the Electromagnetic Vibration and Noise of Ultra‐high‐Speed Bearingless Permanent Magnet Synchronous Motor for Air Compressor

Detailed Description and Analysis of the Cross‐coupling Magnetic Saturation on Permanent Magnet Synchronous Motor

Analysis of Magnetic Field and Force Characteristics of Bearingless Switched Reluctance Motor