Abstract:The worlds demand on aggregates in construction is rapidly increasing from last few years, reason is mainly due to drastic economic growth of the Nations like Brazil, China, and India. Basically, this growth inspires the construction development and destruction activities. This study expresses the state of art of review on research of the industrial wastes which are polluting the environment. During the process of manufacture of several proportions and grades of concrete, non-conventional materials such as foundry sand from metal forging industry and tile dust produced by the tile industries were used to replace fine aggregate partial replacement of 10% - 50%, by weight of fine aggregate. It is found that compressive strength and flexural strength were increased up to 20% replacement of used foundry sand and 10% replacement of tiles dust with natural sand. Since the thickness of pavement slab is reduced, the cost of pavement construction is reduced almost 15% and 22% respectively for both type of alternative concrete mixes. Reuse of waste materials as a partial replacement of fine aggregate in concrete helps to achieve eco-friendly and sustainable development. Quarry dust is a flowable material used for ecofriendly waste for where the grade of conventional concrete is prepared. The mix of nano silica and GGBS with concrete (50 % GGBS, 46% OPC, and 4 % Nano Silica). The effects of reactive silicate and process variables like sodium content and molarity on the alkaline activation of various Nano clays and GGBS are investigated. Considering all the properties and materials partial substitution of 40% copper slag with fine aggregate is nearly equal to the strength of the conventional concrete. Among all other findings foundry sand and quarry dust of 20% and 10% proportions are used as a substitutional material in concrete got achieved adaptable strengths. In porous dam structures bentonite with high water cement ratio with aggregates produces flexible material used as a permeable layer.

A Review on Cement-Based Materials and Practices for Rehabilitation, Retrofitting, and Strengthening of Hydraulic Structures

Injection of discontinuities in concrete dams with cement-based grouts

A Review of Rock-Filled Concrete Dams and Prospects for Next-Generation Concrete Dam Construction Technology

Construction of Concrete-Faced Rockfill Dams with Weak Rocks

Review on research progress of cemented sand and gravel dam

Modern sustainable cement and concrete composites: Review of current status, challenges and guidelines

A Simple Review of Cemented Non-conventional Materials: Soil Composites

Review of the Effects of Supplementary Cementitious Materials and Chemical Additives on the Physical, Mechanical and Durability Properties of Hydraulic Concrete

Seepage Mitigation in Hydropower Dams by Optimization in Roller Compacted Concrete Interlayer (Monoliths) Joint Bonding Technology

The Cemented Material Dam: A New, Environmentally Friendly Type of Dam

A SLOT-CUTTING TECHNIQUE FOR REPAIR AND REHABILIATION OF CONCRETE DAMS AFFECTED BY ALKALI-SILICA REACTION

Reinforced concrete and masonry arch bridges in seismic areas: typical deficiencies and retrofitting strategies

A Review of Waterborne Polymer–Cementitious Composite Repair Materials for Application in Saline Soil Environments: Properties and Progress

STATE OF THE ART IN REPAIR AND STRENGTHENING METHODS OF DETERIORATED CONCRETE BRIDGE STRUCTURES

Applications Of Self-Compacting Concrete In Hydraulic Engineering Of Risk Elimination And Dam Reinforcement Projects

A Brief Review of Rock-Filled Concrete Dams and Prospects for Next-Generation Concrete Dam Construction Technology

Research and Application of Key Technologies for the Construction of Cemented Material Dam with Soft Rock

On a Benchmark Problem for Modeling and Simulation of Concrete Dams Cracking Response

Repair and Protection of Existing Steel-Reinforced Concrete Structures with High-Strength, Textile-Reinforced Mortars

A review of fresh and hardened properties of concrete reinforced with waste materials