Abstract:A linear failure criterion is widely used in slope stability analyses. However, the strength envelope of almost all geomaterials has the nature of nonlinearity. This paper computes rigorous upper bounds on slope stability factors under the condition of plane strain with a nonlinear yield criterion by employing the upper bound theorem of plasticity. A stability factor (or a limit load) computed using a linear Mohr-Coulomb (MC) failure criterion which circumscribes the actual nonlinear failure criterion is an upper bound value of the actual stability factor (or limit load). In this paper, an improved method using a generalized tangential technique to approximate a nonlinear failure criterion is proposed to estimate the stability factor of a slope on the basis of the upper bound theorem of plasticity. Using the generalized tangential technique, the curve of the nonlinear failure criterion is simplified as a set of straight lines according to the linear MC failure criterion. The straight line is tangential to the curve of the nonlinear failure criterion. The set of straight lines of the linear MC failure criterion is employed to formulate the slope stability problem as a classical optimization problem. The objective function formulated in this way is minimized with respect to the location of sliding body center and the location of tangency point. Two typical slope stability problems (a homogeneous soil slope with two slope angles and a vertical cut slope with a tension crack) are analyzed using the proposed method. For the soil slope with two slope angles, the computed results are compared with published solutions by others. The comparison shows that the proposed method gives reasonable and consistent values of the stability factor of the slope. For the vertical cut slope with a tension crack, a statically admissible stress field is constructed for the slope. The stress field does not violate the nonlinear failure criterion. Lower bound solutions are obtained by satisfying stress equilibrium conditions. The upper bound solutions obtained from the proposed method are equal to the lower bound solutions for the vertical cut slope. The agreement further supports the validation of the proposed approach. The influences of the strength parameters in the nonlinear criterion on the stability of slopes are also studied and discussed in this paper.

Non-associated plasticity analysis of slope stability under steady unsaturated flow conditions

Quasi-static Analysis of Saturated Multi-Layered Soils with Anisotropic Permeability and Elastic Superstrata

Stability Analysis of Overconsolidated Unsaturated Red Clay Slope Based on Modified UH Model

Rankine Theory-Based Approach for Stability Analysis of Slurry Trenches

Upper Bound Limit Analysis of Slope Stability Based on Translational and Rotational Failure Mechanism

Numerical Analysis Of Unsaturated Excavation By Using Suction Stress

Slope Stability Analysis with Nonlinear Failure Criterion

Analytical assessment of dynamic stability in 2D unsaturated soil slopes reinforced with piles

Stability analysis of slope in strain-softening soils using local arc-length solution scheme

Analysis of Stability Against Upheaval of Excavation by Upper Bound Method Considering the Retaining Wall

Analysis of Slope Failure Mechanism Caused by Uplift of Confined Water

Method of Stress-Deformation Compatibility Analysis Considering Variable Mass for Roadbed Settlement

Stability analysis of elasto-plastic soil slope by reproducing kernel particle method

A Displacement-Based Method for Evaluating the Stability of a Pile-Stabilized Slope

Stability analysis of unsaturated soil slope by 3-D strength reduction FEM

Stability analysis of unsaturated–saturated soil slopes under rainfall infiltration using the rigorous limit equilibrium method

3D Limit Analysis of the Transient Stability of Slope during Pile Driving in Nonhomogeneous and Anisotropic Soil

Stability Analysis of Strain-softening Slope Reinforced with Stabilizing Piles

Analysis of Partially Saturated Clayey Slopes Using Finite Element Method

An analytical solution for rainfall infiltration into an unsaturated infinite slope and its application to slope stability analysis

Stability of slopes in partially saturated soils: Incorporating the combined effects of seismic forces and pore water pressure