Abstract:Optimal planning and design of microgrids are priorities in the electrification of off-grid areas. Indeed, in one of the Sustainable Development Goals (SDG 7), the UN recommends universal access to electricity for all at the lowest cost. Several optimization methods with different strategies have been proposed in the literature as ways to achieve this goal. This paper proposes a microgrid installation and planning model based on a combination of several techniques. The programming language Python 3.10 was used in conjunction with machine learning techniques such as unsupervised learning based on K-means clustering and deterministic optimization methods based on mixed linear programming. These methods were complemented by the open-source spatial method for optimal electrification planning: onsset. Four levels of study were carried out. The first level consisted of simulating the model obtained with a cluster, which is considered based on the elbow and k-means clustering method as a case study. The second level involved sizing the microgrid with a capacity of 40 kW and optimizing all the resources available on site. The example of the different resources in the Togo case was considered. At the third level, the work consisted of proposing an optimal connection model for the microgrid based on voltage stability constraints and considering, above all, the capacity limit of the source substation. Finally, the fourth level involved a planning study of electrification strategies based mainly on microgrids according to the study scenario. The results of the first level of study enabled us to obtain an optimal location for the centroid of the cluster under consideration, according to the different load positions of this cluster. Then, the results of the second level of study were used to highlight the optimal resources obtained and proposed by the optimization model formulated based on the various technology costs, such as investment, maintenance, and operating costs, which were based on the technical limits of the various technologies. In these results, solar systems account for 80% of the maximum load considered, compared to 7.5% for wind systems and 12.5% for battery systems. Next, an optimal microgrid connection model was proposed based on the constraints of a voltage stability limit estimated to be 10% of the maximum voltage drop. The results obtained for the third level of study enabled us to present selective results for load nodes in relation to the source station node. Finally, the last results made it possible to plan electrification using different network technologies and systems in the short and long term. The case study of Togo was taken into account. The various results obtained from the different techniques provide the necessary leads for a feasibility study for optimal electrification of off-grid areas using microgrid systems.

Segmentation of a conventional medium voltage network into solar PV powered microgrid

Design Implementation and Operation of an Education Laboratory-Scale Microgrid

Techno-economic analysis of reactive power management in a solar PV microgrid: A case study of Sunyani to Becheam MV feeder, Ghana

Integration of Advanced Metering Infrastructure for Mini-Grid Solar PV Systems in Off-Grid Rural Communities (SoAMIRural)

Advanced Control Strategies to Enable a More Wide-Scale Adoption of Single-Phase Photovoltaic Systems

Optimal Electrification Using Renewable Energies: Microgrid Installation Model with Combined Mixture k-Means Clustering Algorithm, Mixed Integer Linear Programming, and Onsset Method

Performance Analysis of a Scalable DC Microgrid Offering Solar Power Based Energy Access and Efficient Control for Domestic Loads

Microgrid-Based Small Modular Reactor for a High-Renewable-Energy Penetration Grid in Ghana

Efficient Power Flow Management and Peak Shaving in a Microgrid-PV System

An Innovative and Holistic Approach for an Optimal Sizing of Mini-Grids in Rural Areas Integrating the Demand, the Supply, and the Network

Assessing the Market for Solar Photovoltaic (PV) Microgrids in Malawi

Optimal energy management in a grid-tied solar PV-battery microgrid for a public building under demand response

Design and Modeling of A Grid-Connected PV–WT Hybrid Microgrid System Using Net Metering Facility

Modelling and optimizing microgrid systems with the utilization of real-time residential data: a case study for Palapye, Botswana

A Methodology for Transforming an Existing Distribution Network Into a Sustainable Autonomous Micro-Grid

A Sustainable Energy Distribution Configuration for Microgrids Integrated to the National Grid Using Back-to-Back Converters in a Renewable Power System

Advanced MPPT integration in MVDC grids for optimal performance of series-connected PV power plants

Enhanced Particle Swarm Optimization-Based Feeder Reconfiguration Considering Uncertain Large Photovoltaic Powers and Demands

Economic Feasibility of a Hybrid Microgrid System for a Distributed Substation

Advancing the Adoption of Net Metering: An Economic Assessment of Grid-Tied Solar Photovoltaic Systems in Urban Homes in Ghana

Power management scheme development for large-scale solar grid integration