Abstract:Purpose A computational fluid dynamics (CFD) analysis has been carried out on the aerodynamic and thermal behavior of an incompressible Newtonian fluid having a constant property and flowing turbulently through a two-dimensional horizontal high-performance heat transfer channel with a rectangular cross section. The top surface of the channel was kept at a constant temperature, while it was made sure to maintain the adiabatic condition of the bottom surface. Two obstacles, with different shapes, i.e. flat rectangular and V-shaped, were inserted into the channel; they were fixed to the top and bottom surfaces of the channel in a periodically staggered manner to force vortices to improve the mixing and consequently the heat transfer. The first fin-type obstacle is placed on the heated top channel surface, and the second baffle-type one is placed on the insulated bottom surface. Five different obstacle situations were considered in this study, which are referred as cases FF (flat fin and flat baffle), FVD (flat fin and V-downstream baffle), FVU (flat fin and V-upstream baffle), VVD (V-downstream fin and V-downstream baffle) and VVU (V-Upstream fin and V-upstream baffle). Design/methodology/approach The flow model is governed by Reynolds-averaged Navier–Stokes equations with the k-epsilon turbulence model and the energy equation. These governing equations are discretized by the finite volume method, in two dimensions, using the commercial CFD software FLUENT software with the Semi Implicit Method for Pressure Linked Equations (SIMPLE) algorithm for handling the pressure-velocity coupling. Air is the test fluid with the flow rate in terms of Reynolds numbers ranging from 12,000 to 32,000. Findings Important deformations and large recirculation regions were observed in the flow field. A vortex causes a rotary motion inside the flow field, which enhances the mixing by bringing the packets of fluid from the near-wall region of the channel to the bulk and the other way around. The largest value of the axial variations of the Nusselt number and skin friction coefficient is found in the region facing the baffle, while the smallest value is in the region near the fin, for all cases. The thermal enhancement factor (TEF) was also introduced and discussed to assess the performance of the channel for various obstacle situations. It is found that the TEF values are 1.273-1.368, 1.377-1.573, 1.444-1.833, 1.398-1.565 and 1.348-1.592 for FF, FVD, FVU, VVD and VVU respectively, depending on the Re values. In all cases, the TEF was found to be much larger than unity; its maximum value was around 1.833 for FVU at the highest Reynolds number. Therefore, the FVU may be considered as the best geometrical configuration when using the obstacles to improve the heat transfer efficiency inside the channel. Originality/value This study can be a real application in the field of shell-and-tube heat exchangers and flat plate solar air collectors.

Influence of the position and dimensions of a U-shaped obstacle in a cavity containing a nanofluid on the thermal performances

Numerical investigation of the nanoparticles nature effect on the mhd behavior in a square cavity with a metallic obstacle

Mixed Convection Heat Transfer and Flow of Al2O3-Water Nanofluid in a Square Enclosure with Heated Obstacles and Varied Boundary Conditions

Mixed-convection Flow and Heat Transfer in an Inclined Cavity Equipped to a Hot Obstacle Using Nanofluids Considering Temperature-Dependent Properties

Numerical study of natural convection in an inclined cavity filled with Al2O3/Cu-H2O nanofluids

The effect of buoyancy force on natural convection heat transfer of nanofluid flow in triangular cavity with different barriers

The Role of Heater Size and Location in Modulating Natural Convection Behavior in Cu-Water Nanofluid-Loaded Square Enclosures

Impact of five obstacles with constant temperatures on the mixed convection flow of water/copper nanofluid in a rectangular cavity with a magnetic field

Natural convection investigation under influence of internal bodies within a nanofluid-filled square cavity

Analysis of natural convection for a Casson-based multiwall carbon nanotube nanofluid in a partially heated wavy enclosure with a circular obstacle in the presence of thermal radiation

LBM simulation of MHD nanofluid heat transfer in a square cavity with a cooled porous obstacle: effects of various temperature boundary conditions

Heat transfer study and optimization of nanofluid triangular cavity with a pentagonal barrier by finite element approach and RSM

Baffle orientation and geometry effects on turbulent heat transfer of a constant property incompressible fluid flow inside a rectangular channel

Mixed Convection of an Ag/Water Nanofluid in a Ventilated Square Cavity Containing Cold Blocks of Different Shapes

Effect of L-shaped heat source and magnetic field on heat transfer and irreversibilities in nanofluid-filled oblique complex enclosure

Numerical study of mixed convection of nanofluid inside an inlet/outlet inclined cavity under the effect of Brownian motion using Lattice Boltzmann Method (LBM)

Heat generation/absorption effect on natural convective heat transfer in a wavy triangular cavity filled with nanofluid

Simulation of natural convection of nanofluid inside a square cavity using experimental data by lattice Boltzmann method

Data analysis of thermal performance and irreversibility of convective flow in porous-wavy channel having triangular obstacle under magnetic field effect

Computational Modelling and Simulations to Study the Thermal Enhancement in Nanofluid Flow in Undulating Wavy Cavity of a Cylinder: Finite Element Analysis

Characterizing Natural Convection and Thermal Behavior in a Square Cavity with Curvilinear Corners and Central Circular Obstacles